Assembly of new electronics always causes mixed feelings: on the one hand, the joy of acquiring a modern gadget, on the other hand, the fear of damaging something during unpacking. Installing the stand is the first and most critical stage, as it is at this stage that the risk of mechanical damage to the matrix is maximum. TV redmi TV technologized IPS or VA, which are extremely sensitive to point pressure.
Unlike older models with thick bezels, modern frameless panels require a special approach. Incorrectly capturing the body can lead to cracks or lights that can no longer be eliminated by software. In this article, we will discuss all the nuances of how to safely and reliably attach legs to the TV, taking into account the design features of different diagonals.
You need a flat, wide surface covered with a soft cloth or blanket to avoid scratches on the screen and frame, and you should immediately find an assistant if your device has a diagonal of 50 inches or more, since it can be difficult for one person to hold a heavy panel and simultaneously get screws into the holes.
Preparation of the workplace and tools
Well, good assembly begins long before you pick up the screwdriver. The first step is to organize the space. The table or the floor should be completely clean, without the small details that can scratch the glossy surface of the screen. The ideal solution is to use the original packaging box spread out on the floor, because the foam inserts perfectly repeat the contours of the TV.
As for the tools, in most cases, a mid-sized cross screwdriver (PH2) is enough to mount the Xiaomi stand. However, some models, especially the Mi TV Stick series (where the stand is different) or the new Mi TV P1, may require a slate screwdriver or even a hexagon, although this is rare. Always check the complete set before starting work.
It's important to make sure that there are no protruding elements on the surface where you put your TV. Even a small crumb or a forgotten cog can become a fulcrum, putting excessive pressure on the matrix when you set your legs. Never put your TV screen down on a hard floor without a protective coating of fabric or cardboard. This golden rule has saved thousands of panels from smashed screens.
⚠️ Note: It is strictly forbidden to take the TV by the edges of the matrix when installing legs. Keep the device only behind the side edges of the body or special technological notches, if they are provided by the design.
Make sure the lighting in the room is bright enough, you have to work with small parts and holes that can be poorly visible in dim light, and good visibility will help avoid errors in positioning the screws.
Analysis of stand design and installation options
Xiaomi uses several types of leg designs depending on the diagonal and year of the model. Understanding the type of your stand will help avoid confusion. The three main options are the classic center legs, wide side supports and versatile V-shaped racks.
The center legs are usually mounted on models with a diagonal of up to 43 inches. They are attached to special slots at the bottom of the body and require precise centering. The side supports are characteristic of large diagonals (from 50 inches and above), where a wide step is necessary for stability.
In some models, such as the Redmi TV series, the design can include the legs in two positions: wide for stability on the stand or narrow if the TV is on a narrow shelf.
Special attention should be paid to marking. On the inside of plastic or metal elements of the stand are often marked L (Left) and R (Right), ignoring these marks can cause the legs to stand at the wrong angle or the holes do not coincide with the threaded bushings in the case.
Step-by-step instruction: installation of central and side legs
The installation process depends on the configuration, but the general principle remains the same for all Mi Smart TV devices. First, gently place the TV screen down on the prepared soft surface.
Take the first leg and combine the mounting holes with the response parts on the body. Don't put too much effort. If the leg doesn't get in place with a slight effort, then you have the wrong position or confused left and right sides. The screws should be twisted cross-cross: first tighten one slightly, then the second one to ensure uniform fit.
☑️ Checklist of correct leg installation
For models with a central stand, the process may be different, and it's important to first assemble the rack itself if it's made up of multiple pieces, and then insert it into the groove before the characteristic click, and in some cases, additional screw fixation from the bottom is required, which prevents the TV from accidentally shifting.
⚠️ Attention: Don't pull the screws! the plastic of Xiaomi TVs' body is quite soft.Excessive force can lead to thread licking or a crack in the seat, making the warranty invalid.
Once all screws are fixed, gently lift the TV behind the bottom of the body (not behind the screen!) and check the stability of the structure. The TV should not stagger or fall to the side. If there is a skew, check if all screws are fully twisted and if the height of the legs is correctly matched, if they are adjusted.
Features of installation for different screen diagonals
The size of the device dictates its installation rules. Small diagonals (32-40 inches) are lightweight but also very fragile, and it is important not to overdo it when twisting, because thin plastic can not withstand pressure.
Medium and large diagonals (50-65 inches or more) are significant in weight. In models such as the Mi TV 4X or Mi TV Q1, the legs are often made of metal or reinforced plastic. When installing such TVs, it is critical that the surface of the tube is wider than the step of the legs by at least 10-15 cm on each side.
Ultra-large panels (75 inches and above) require two people to participate even in the leg installation phase. One person must hold the body while the other person holds the mounts. These devices can weigh more than 30 kg, and the risk of dropping them or damaging the screen if you move sloppy is very high.
| Screen diagonal | Type of stand | Effort required | Recommended number of persons |
|---|---|---|---|
| 32" - 40" | Two side legs. | Minimum | 1 person |
| 43" - 50" | Central or lateral | Average. | 1-2 |
| 55" - 65" | Two broad sideways | High (control) | 2 people |
| 75" and above" | Reinforced lateral | Maximum. | 2 persons (required) |
What if the screw doesn't turn?
Frequent errors and ways to fix them
One of the most common mistakes is to lose special washers or pads, which sometimes come with legs, which are used to compensate for irregularities and reduce vibration, and if you lose such a pad, the leg can start creaking or staggering over time.
Another mistake is to put the TV on an uneven surface right after assembly, and even if the legs are screwed perfectly, the curved tube will cause the weight to be unevenly distributed, creating stress at the bottom of the matrix, which can cause image defects in the long run.
Some users try to use custom screws if relatives are lost, this is strongly discouraged. The length and diameter of the threads in Xiaomi TVs are precisely matched. Too long a screw can rest on internal components and damage the board or plumes, and too thin one can not withstand weight.
💡
Tip: Before you finally tighten the screws, swing the leg from side to side. If there is no backlash, you can complete the installation. If the leg wobbles, loosen the screws, align the position and tighten again.
Also worth mentioning is the error of ignoring the instructions: the location of the holes can vary slightly in different batches of the same model range, and always check the paper insert, even if you have already built such a TV before.
Alternative options: wall bracket
If the installation on the regular legs is impossible due to a narrow cabinet or interior features, a wall bracket will be an excellent solution. Xiaomi TVs support the VESA mounting standard, which is universal for most manufacturers.
To move to wall mounting, the legs need to be dismantled. Reverse installation: gently twist the screws and put the legs in the box so you don't lose them. On the back, you'll see four threaded holes arranged in a square or rectangle.
VESA mount sizes vary by diagonal. 32-40 inches is usually 200x200 mm, 50-55 inches 400x200 mm or 400x300 mm, and for larger models 400x400 mm or more. When choosing a bracket, make sure it is designed for the weight of your device. Don't skimp on the fastener: a cheap bracket may not be able to withstand a heavy matrix.
💡
Xiaomi's staff legs often have a wide pitch, which requires a wide bench.If your furniture is narrow, use VESA-Short paw bracket or central rack is the only safe solution.