Xiaomi's wireless vacuum cleaners are not just cleaning techniques, they're real dust and dirt control tools. But even the most advanced device requires regular maintenance, especially when it comes to battery models and complex filtration systems. Many users are afraid of washing the vacuum cleaner incorrectly: some worry about water getting into electronics, others worry about the safety of the battery, others just don't know where to start.
In this article, we will learn how to properly wash Xiaomi’s wireless vacuum cleaner so that it lasts longer, does not lose power and does not fail. You will learn what parts can be washed underwater and what only to wipe, how to dry filters so as not to spoil them, and what to do if the vacuum cleaner after washing poorly sucks, and we will also reveal the secret life hack to clean the turbobrush from tangled hair without scissors - this will save you time and nerves!
Which Xiaomi models can be washed and which ones can’t
Not all Xiaomi wireless vacuum cleaners are equally water resistant, such as the Mi Robot Vacuum series, which is strictly forbidden to wash, except for the wet cloth.
- 🔹 Xiaomi Mi Handheld Vacuum Cleaner (1C, 2, 3, 3C)
- 🔹 Xiaomi Dreame V9, V10, V11, V12
- 🔹 Xiaomi Jimmy JV51, JV69
- 🔹 Xiaomi Deebot T10, T20 (hybrid)
— They have removable dust containers and washable filters, but even they have limitations, like, you can't put the engine unit and the battery in water, you can just wipe it out, HEPA-filter and garbage container in most models can be washed under running water, but with the observance of the rules.
If you're not sure if you can wash your model, check the instructions or look for an IPX4/IPX5 badge on the vacuum cleaner case, which means spray protection. But even if you have protection, you shouldn't water the vacuum cleaner out of the shower!
Preparation of the vacuum cleaner for washing: what to do before disassembly
Before you start washing, be sure to follow these steps:
- Turn off the vacuum cleaner and take out the battery (if it is removable).
- Make sure the device is completely discharged – it’s safer for electronics.
- Remove all nozzles and accessories (turbobrush, slot nozzle, extension cord).
- Shake the garbage out of the container into the urn – do not wash it with large garbage.
Pay special attention to the turbobrush, if it's full of hair or thread, clean it before you wash it.
- 🔧 Unscrew the brush cover (usually it is fixed with latches or a screw).
- 🧹 Remove the coiled hair with scissors or a special plastic scraper (come complete with some models).
- 🧼 Wipe the shaft of the brush with a wet wipe.
💡
If you do not have scissors at hand, use an old bank card - its sharp edge will easily taunt and cut off the coiled hair.
Don't ignore this stage! A clogged brush not only collects dust worse, but it also overloads the engine, which can lead to its failure.
Step-by-step: how to wash removable parts of the vacuum cleaner
Now, let's move on to the washing process, and let's figure out which parts can be washed underwater and which ones can only be washed.
| Detail | Can I wash under water? | How to wash properly | Frequency of cleaning |
|---|---|---|---|
| Garbage container | ✅ Yes. | Warm water with soap, then dry | After each use |
| Cyclone filter (pre-cleaning) | ✅ Yes. | Wash under a stream of water, do not rub with a hard brush | 1 time in 1-2 weeks |
| HEPA-filter | ⚠️ Conditionally. | Wash with a wet sponge or vacuum | 1 time in 3-6 months |
| Turbobrush | ❌ No. | Wash with a wet cloth, cleanse from hair | After every cleaning. |
| Vacuum case | ❌ No. | Wash with a wet microfiber | As pollution progresses |
Now, more about each stage:
- Washing the garbage container: 🚿 Remove the container from the vacuum cleaner. 🧼 Fill the basin with warm water, add a little liquid soap or dishware. 🧽 Wash the container with a sponge, paying attention to the corners where the dust accumulates. 💧 Rinse thoroughly under running water.
- Cyclone filter cleaning: 🌀 Remove the filter from the container (usually at the top of the container). 🚰 Wash under a weak stream of water, avoiding strong pressure. ❌ Do not use brushes or abrasives – they can damage small cells.
Care for HEPA-filter
- 🔍 Check the filter: if it is highly contaminated, it is better to replace it.
- 🧴 If the filter is washable (check in the instructions), rinse it in water without detergents.
- ☀️ Dry the filter for at least 24 hours before installing it back.
This technique works because of the centrifugal force, because the hair comes out of the brush and it's easier to cut, but be careful not to put your fingers close to the rotating blades!
What happens if you don't clean the turbobrush?
If your hair is too entangled, you can use special cleaning brushes for vacuum cleaners (sold in hardware stores), which have long teeth that penetrate between the blades and draw out the garbage.
What not to do when washing the vacuum cleaner Xiaomi
Even if you follow the instructions, there are common mistakes that can ruin the vacuum cleaner:
- 🚫 Immersion of the motor unit in water - this will lead to a short circuit.
- 🚫 Use aggressive detergents (such as Domestos or acetone) – they corrode plastic and rubber seals.
- 🚫 Dry filters with a hair dryer or on a battery - high temperatures spoil HEPA-filter.
- 🚫 Collect a vacuum cleaner if the parts are wet - this will lead to the appearance of mold inside.
- 🚫 Clean the turbobrush with a knife or screwdriver - so you can damage the blades.
⚠️ Attention! If the vacuum cleaner starts to make unusual sounds (squeaking, humming) after washing, turn it off immediately. This may mean that water has entered the bearings of the motor.
Another common problem is the smell of the vacuum cleaner after washing, which is when you don't dry the container or the filters properly, to eliminate the smell.
- 🌿 Wash the container with a solution of water with vinegar (1:1).
- ☀️ Dry all the details in the sun for 2-3 hours.
- 🍋 Put a slice of lemon or a bag of soda in the container for 12 hours.
How to take care of the vacuum cleaner battery
The battery is the most expensive part of a wireless vacuum cleaner, so it lasts longer.
- 🔋 Do not keep the vacuum cleaner fully discharged or 100% charged for a long time.
- 🔌 Charge only with the original charger.
- 🌡️ Avoid overheating (do not leave the vacuum cleaner in the sun or near the battery).
- 🔄 Once every 3 months, complete a full discharge-charging cycle to calibrate the battery.