How to wash the filter of the vacuum cleaner Xiaomi: a detailed guide with photos and nuances for different models

Xiaomi vacuum cleaners are some of the most popular cleaning assistants thanks to a combination of power, smart features and affordable price.But even the most advanced appliances require regular maintenance, and filters play a key role here. HEPA-Not only does a filter or a dirty cyclone block reduce cleaning efficiency, it can also cause an engine to overheat, smell or even break, and filters need to be washed properly — not all parts can withstand water, and some require delicate handling.

In this article, we will discuss how to clean the filters in the vacuum cleaners Xiaomi Mi Robot Vacuum, Dreame and other models, which products to use and which to avoid, and learn how to often care, what is different from dry cleaning wet, and what to do if the filter deformed after washing, instructions supported by photos, compatibility tables and answers to frequent questions.

If you've never taken a vacuum cleaner apart or you're afraid of breaking something, don't worry. The process of cleaning filters is easier than it seems if you know a few key things, HEPA-The filter in most Xiaomi models is washed only in cold water, and the cyclone block can not be rubbed with hard brushes.

What filters are in the vacuum cleaners Xiaomi and why clean them

Xiaomi vacuum cleaners (including robot vacuum cleaners and vertical models) usually have two types of filters:

1. HEPA-filter, which picks up tiny particles of dust, allergens and bacteria, most commonly removable, located at the top of the body.
2. Cyclone block (pre-filter) - traps large debris and dust before entering the engine, can be made in the form of a grid or plastic container.

In some models (e.g. Dreame) V11 Mi Robot Vacuum-Mop 2 Pro also comes with additional fine cleaning filters or charcoal filters to neutralize odors.

Why is it important to clean filters regularly?

• 🔥 Overheating of the engine. Clogged filter causes the vacuum cleaner to work at the power limit, which reduces the life of the vacuum cleaner.
• 🤧 Deteriorating cleaning quality. Dust passes through clogged filter pores and returns to the air.
• 🦠 Bacterial reproduction: The humid environment in a dirty filter is the perfect place for mold and microbes.
• 💸 Expensive repairs: Ignoring care can cause turbines or electronic components to break down.

According to research, contaminated HEPA-The filter loses up to 50% of its efficiency after 3 months of heavy use, and Xiaomi’s instructions often state that filters should be changed every 6-12 months, but with proper care, this period can be extended by 2-3 times.

Preparation for cleaning: what you need and safety measures

Before you start washing filters, prepare everything you need. Don't use aggressive detergents, they can damage the filter material or leave toxic residues.

• 💧 Warm water (not hotter than 40)°C).
• 🧼 Soft detergent (such as dishwashing or baby shampoo).
• 🧽 Soft brush (dental or for cleaning bottles).
• 🧻 Microfiber cloth or paper towels for drying.
• ⏳ Time – filters must dry naturally (at least 24 hours).

What can't be done:

• ❌ Wash filters in the dishwasher.
• ❌ Use bleach or solvents.
• ❌ Dry with a hair dryer or on a battery (may deform).
• ❌ Rub with hard sponges (damage micropores) HEPA).

If your vacuum cleaner is warranty, check if cleaning the filters yourself will violate the service conditions. In most cases, Xiaomi allows the care of removable parts, but does not recommend disassembling the case.

💡

Before cleaning, take a picture of the location of the filters in the vacuum cleaner - this will help to properly collect everything back.

Step-by-step instructions: how to wash HEPA-filter in Xiaomi vacuum cleaners

HEPA-The filter is the most delicate element. It can be washed, but with care. Let's look at the process using popular models: Mi Robot Vacuum, Dreame. V10/V11 Deebot T8/T9.

Step 1: Removing the filter

In most of the robot vacuum cleaners Xiaomi HEPA-The filter is located under the top cover (near the power button) in vertical vacuum cleaners (e.g. Dreame). V11) It's in a pen or next to a dust collector. Carefully pull the filter over you, it should come out without effort.

Step 2. Dry cleaning.

Before washing, remove large particles of dust:

• 🌬️ Blow the filter with compressed air (for example, a dryer in cold blowing mode).
• 🖌️ Clean gently with a brush with soft pile.

Step 3.

1. Put warm water in the basin (not higher than 40).°C).
2. Add a few drops of mild detergent.
3. Immerse the filter in water and massage your fingers gently for no more than 1-2 minutes.
4. Rinse under running water until the foam ceases to flow.

Step 4: Drying

This is the most important stage! HEPA-The filter must dry for at least 24 hours in a well-ventilated place, away from direct sunlight and heaters.

Remove the filter from the vacuum cleaner|Remove dust with a dry brush|Wash in warm water with a mild remedy|Rinse thoroughly|Dry 24.+ hour-->

Video instructions (for clarity):

If you can see the information visually, check out the official video from Xiaomi (available on YouTube for "Mi Robot Vacuum filter cleaning").

How to Clean Cyclone Block and Pre-Filter

The cyclone block (or pre-filter) traps large debris and dust before it enters the engine. HEPA-filter, it can be washed more often and actively, but also with caution.

Instructions for robot vacuum cleaners (Mi Robot Vacuum, Dreame Bot):

1. Remove the dust collector (usually it is attached to the latches).
2. Remove the cyclone block – it looks like a plastic piece with blades or mesh.
3. Remove visible debris by hand or vacuum cleaner.
4. Wash under warm water, if necessary, use a brush for hard-to-reach places.
5. Dry in air (enough 2-3 hours).

Instructions for vertical vacuum cleaners (Dreame) V10/V11, Mi Handheld Vacuum):

Features for models with wet cleaning function (Mi Robot Vacuum-Mop 2 Pro):

In such vacuum cleaners, the cyclone unit may have additional membranes to protect against moisture. Never wash them with hot water - this will violate the tightness.

How often to wash filters depending on the Xiaomi model

Cleaning regularity depends on the intensity of the vacuum cleaner and the type of filter, and below is a table with recommendations for popular models:

If you use a vacuum cleaner for cleaning construction dust or after repair, filter cleaning should be done after each use.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when cleaning filters, and here are the most common ones and ways to prevent them:

1. Use of hot water

Many people mistakenly believe that hot water removes dirt better. It actually warps. HEPA-filter and destroys the adhesives in the cyclone block. Optimal temperature is 30-40°C.

2 Drying with a hair dryer or on a battery

Drying quickly at high temperatures shrinks the filter material, and it can stop fitting tightly, and the dust will seep past.

Cleaning filters with vacuum cleaner

It seems logical, but a powerful flow of air can damage thin fibers. HEPA-It is better to use a brush or compressed air (for example, a spray for cleaning equipment).

4. Ignoring sealing rubbers

Cyclone blocks often have rubber pads that dry out over time, and if they're not lubricated with silicone, the vacuum cleaner will lose power because of the air sucker.

5. The use of aggressive chemistry

Bleach, vinegar or alcohol destroy the filter structure, and only mild detergents (such as Fairy or Baby Shampoo) are allowed.

💡

HEPA-The filter after washing should dry completely, even a little moisture can cause mold and bad smell.

When is the time to change the filter, not clean it?

Even with the most careful care, the filters wear out over time, and here are signs that it's time to consider replacing them:

• 🔍 Visible damage: tears, deformation, material stratification.
• 💨 Reduced suction power even after cleaning.
• 🦠 Persistent unpleasant smell that can not be cleaned by washing.
• ⏳ Excessive service period (for HEPA-filters – usually 6-12 months).

How do you choose a replacement?

When buying a new filter, pay attention to:

1. The vacuum cleaner model -- filters are not universal, HEPA-filter V10 It is not suitable for Mi Robot Vacuum.

The original Xiaomi filters can be ordered on the official website or in trusted stores (for example, AliExpress, Beru, Citroniks). The average cost is from 300 to 1000 rubles, depending on the model.

⚠️ Note: Some vendors offer "universal" HEPA-Filters are low-cost, and they're mostly low-filter fakes (HEPA 10 instead HEPA 13) which do not trap fine dust and allergens.

FAQ: Answers to Frequent Questions