Replacement of the filter in the robot vacuum cleaner Xiaomi Vacuum Mop: step-by-step instructions with photos and tips

Xiaomi Vacuum Mop Robot Vacuum Mop (including models) 1C, 2 Pro, S10 and others) require regular maintenance to maintain the efficiency of cleaning and extend the life of the device. HEPA-It's responsible for trapping fine dust, allergens and microparticles, preventing them from getting back into the air, and over time, the filter clogs, loses bandwidth, and can even become a source of bad smell.

In this article, you will find step-by-step instructions for changing the filter in Xiaomi’s robot vacuum cleaner, including the selection of suitable consumables, recommendations for replacement frequency and typical errors that users make. We will also take a look at how the original filters differ from their counterparts, and give tips for caring for other interchangeable elements (brushes, wipes for wet cleaning). If your vacuum cleaner has started to collect less dust, emit unusual sounds or smells of dampness, it’s probably time to update the filter.

Why it is important to change the filter in time Xiaomi Vacuum Mop

Many users underestimate the role of the filter in a robot vacuum cleaner, believing that it is enough to clean the garbage container. HEPA-The filter performs several critical functions:

• 🧹 Microparticle capture: The filter traps dust up to 0.3 microns, including pollen, mold spores and animal hair. Without it, the vacuum cleaner simply drives dirt around the room.
• 🤧 Allergen protection: especially important for asthmatics and people with allergies, clogged filters can't do the job, and allergens can return to the air.
• 🔊 Preventing overheating: A clogged filter makes the motor run at increased power, leading to accelerated turbine wear and noise increase.
• 🦠 Fighting bacteria: the moist environment inside the vacuum cleaner promotes germ reproduction. A quality filter often has an antibacterial coating.

According to the manufacturer, the original resource HEPA-The filter in the Xiaomi Vacuum Mop is 150-200 hours of operation (approximately 3-6 months with daily cleaning:

• 🐕 Animals live in the house (the wool quickly clogs the filter).
• 🏗️ Repairs or often removes construction dust.
• 🌿 High humidity in the room (risk of mold).

⚠️ Warning: If there is a dusty plaque on furniture after cleaning the room and the vacuum cleaner is louder, these are good signs that the filter needs to be replaced!

What filters are suitable for Xiaomi Vacuum Mop: original vs analogues

Manufacturer recommends the use of original filters with articular ZNMS01JM (For most Vacuum Mop models, they are guaranteed to be sized and have a certified filtration rating. HEPA H11. However, their price (from 800 to 1500 rubles per piece) forces many users to look for alternatives.

On the market are analogues from third-party brands such as Baseus, Xiaowa or V-Robot. They are cheaper (300-600 rubles), but there are nuances:

If you decide to save money and buy an analogue, pay attention to:

• 📏 Size: filter should fit tightly into the socket without gaps. Check compatibility with your model (for example, for Xiaomi Vacuum Mop 2 Pro will fit the article). ZNMS02JM).
• 🔍 Material quality: Cheap filters can crumble or pass dust.
• 📦 Components: some analogues go without sealing gum, which reduces efficiency.

💡

Before buying a similar product, read reviews on marketplaces – users often share photos of comparing the original and the copy. Pay attention to complaints about “dust from the exhaust” after installing an unoriginal filter.

Step-by-step: how to change the filter in Xiaomi Vacuum Mop

The filter replacement process takes no more than 5 minutes and requires no special tools.

• 🔧 New HEPA-filter (original or verified analogue).
• 🧴 Wet wipe for cleaning the dust collector.
• 🕳️ Vacuum cleaner or brush to remove dust from internal cavities.

Step 1: Preparation of the vacuum cleaner

Turn off the robot, remove it from the docking station (if any) and flip the lid upwards. Make sure there is no major litter in the garbage container - it is better to remove it in advance so as not to sprinkle when the filter is removed.

Step 2: Remove the old filter

1. Press the latch of the dust collector (located on the back of the case) and remove the container.
2. Inside the container you will see a black or gray cylinder – that’s what it is. HEPA-- Take it up, carefully.
3. If the filter is "rigged" from dust, do not pull force - put it with a flat screwdriver on the edge.

Step 3: Cleaning the dust collector

Before installing a new filter, be sure to wash the container with warm water and soap and dry.

• 🌀 Deepening under the filter - there accumulates fine dust.
• 🕳️ Ventilation holes (they can be cleaned with a toothpick).
• 🔄 The sealing gum on the container lid.

Remove the old filter without residues|Drying the garbage container|Check the integrity of the sealing gum|Clean the vents-->

Step 4: Installation of a new filter

Insert the new one. HEPA-filter to the nest with an arrow up (the original filters have markings). Make sure it sits tight - if there are gaps left, the filter may fall out during cleaning. Close the container lid before clicking.

Step 5: Reset the filter counter (optional)

In some models (for example, Xiaomi Vacuum Mop 2 Pro) after changing the filter, you need to reset the counter in the Mi Home application:

1. Open the app and select your vacuum cleaner.
2. Go to Settings. → Condition of consumables.
3. Press Reset filter counter.

⚠️ Attention: Don't wash HEPA-The filter is underwater, unlike the sponge filters in some vacuum cleaners, HEPA-Xiaomi Vacuum Mop filters are not designed for washing. Water breaks down the fibers, and the filter stops trapping dust.

Frequent Filter Replacement Mistakes and How to Avoid Them

Even a simple procedure like changing a filter can go wrong.-5 Mistakes that users make:

• 🔄 Upside-down filters. The original filters have an arrow that indicates the correct position, and if you ignore it, the filter will not fit tightly, and the dust will leak past.
• 🧼 Using a wet container, if you don't dry the dust collector after washing, you can get mold inside!
• 🔧 Trying to clean the filter with a vacuum cleaner, it destroys the structure. HEPA-The filter can only be gently shaken off or blown with compressed air (but not more often than 1-2 times).
• 📦 For example, the filter from Xiaomi Vacuum 1 is not suitable for Vacuum Mop 2 Pro – check the article!
• 🕳️ Forgetting to clean the air vents, clogged holes reduce the suction force, and the vacuum cleaner starts to spit with dust.

Another common problem is that the vacuum cleaner doesn't turn on after the filter is changed, and the reasons may be as follows:

• 🔌 The container is not tightly closed – check to see if the lid is clicked.
• 📱 App crash - restart vacuum cleaner (hold power button for 10 seconds).
• 🔋 Battery is discharged - put the vacuum cleaner on charging for 30 minutes.

💡

If the filter is replaced and the vacuum cleaner is louder or dust collecting is worse, it is likely that the filter is installed incorrectly or it is a fake. Check the density of the fit and compare the new filter with the old one by weight (the original is heavier).

How to extend the life of filters and other consumables

The life of the filter depends not only on the operating time, but also on the operating conditions. Here are some tips to help save on consumables:

• 🧹 Clean the container after each cleaning, and the less dust you leave inside, the longer the filter will last.
• 🐾 Use a wool nozzle if there are animals in the house, and it traps large debris before it enters the filter.
• 🌡️ Keep the vacuum cleaner in a dry place. Humidity accelerates filter wear and promotes mold.
• 🔄 Wash the sponge prefilter (if your model has one) once every 2 weeks. HEPA-filter.

Also, look for other consumables that require replacement:

If you use a vacuum cleaner for wet cleaning, remember to wash the water tank after each use and dry it. Otherwise, an unpleasant smell may appear inside, which will spread throughout the room during cleaning.

💡

To check if the filter is clogged, turn the vacuum cleaner on at maximum power and hold your hand to the exhaust hole. If the airflow is weak, the filter needs to be replaced.

Where to buy a filter for Xiaomi Vacuum Mop: proven sources

Original filters and quality analogues can be purchased in several places:

• 🛒 Xiaomi official store (mi.com) - the guarantee of the original, but there are often interruptions with the presence of the.
• 📦 Marketplaces: Wildberries - a large selection of analogues, quick delivery. Ozon - often there are sets of multiple filters at a discount. AliExpress - the cheapest, but delivery can take up to a month.
• 🏬 Machinery stores (M.Video, Eldorado) - sometimes available, but the price is higher than online.
• 🔧 Xiaomi service centers - you can order with installation (relevant if the vacuum cleaner is guaranteed).

When buying, pay attention to:

• 📌 Article: For Xiaomi Vacuum Mop 1C — ZNMS01JM, 2 Pro — ZNMS02JM.
• 📅 Production Date: Old filters could have been in storage for years and lost properties.
• 📦 Packaging: the original has a hologram and a Xiaomi barcode.

The cost of the original filter at the beginning of 2026:

• Wildberries: 800–1200 ₽.
• Ozon: 900–1400 ₽.
• AliExpress: 500–900 ₽ (delivery-by-delivery).

⚠️ AliExpress often sells “enhanced” filters with the inscription HEPA H13. In fact, this is a marketing ploy – the real degree of filtering rarely exceeds the level of the marketing ploy. H11. Focus on reviews, not on the stated characteristics.

What to do if the filter is replaced by the vacuum cleaner

Sometimes users are faced with the fact that after installing a new filter vacuum cleaner:

• 🔊 Hoodling louder.
• 🌀 It sucks dust badly.
• 🛑 Error 10 – Error 10 – clogging of the system).

Here's the diagnostic algorithm:

1. Check the filter installation: Remove the filter and reset it, making sure it sits to the end. Check if it has a protective film on it (sometimes it is forgotten to remove).
2. Clean the turbine: Remove the bottom cover of the vacuum cleaner (unscrew 4 screws). Blow the turbine with compressed air or gently clean with a brush.
3. Reset Settings: In the Mi Home app, go to Settings → Reset to the factory. After the reset, reconnect the vacuum cleaner to the Wi-Fi.

Check the sensors.

• Wipe the IR sensors (located front and bottom) with a cotton swab.
• Make sure nothing is blocking the bumper.

If the problem persists, it may not be the filter, for example, an Error 10 might indicate:

• 🕳️ Clogging of the suction channel (check the hose from the container to the turbine).
• 🔋 Motor malfunction (requires diagnosis in the service).
• 📱 Firmware failure (update the software via Mi Home).

FAQ: Frequent Questions about Replacing a Filter