Connecting the console to the Xiaomi TV P1: all manner of settings

Connecting an external console to Xiaomi TV P1 — The challenge faced by users who want to expand the functionality of a smart TV, despite the rich built-in capabilities of the model (4K-Dolby Vision support, Google built-in TV), Many people prefer to use separate devices for IPTV, But not everyone knows that Xiaomi is a satellite TV or a retro game. P1 has features of working with external signal sources associated with firmware MIUI TV and port management.

In this article, we will analyze all the current ways of connecting - from the standard HDMI to alternative methods for legacy consoles, and also consider the typical problems: why the TV does not see the device, how to adjust the sound through the ARC/eARC, And what to do if the image is blurry or missing. P1 After connecting to avoid conflicts between embedded and external applications.

1. Which consoles are compatible with Xiaomi P1?

Xiaomi TV TV P1 (model L55M7-7ARU, L65M7-7ARU etc.) supports most modern consoles, but there are nuances:

• 📺 Android TV-boxing (NVIDIA Shield, Xiaomi Mi Box S, Mecool: full compatibility HDMI 2.1 including HDR10+ and Dolby Atmos.
• 🛰️ Satellite consoles (Tricolor) GS B531M, MTS TV): Requires manual permission settings (optimum — 1920×1080@50Hz).
• 🎮 Game consoles (PS5, Xbox Series X: Supported but may need to be disabled HDMI-CEC TV settings.
• 📼 IPTV-prefix (MAG 250/322, Dune HD): Compatible but when used HDMI-Extensionists are possible artifacts.
• 🕹️ Retro consoles (Nintendo) NES, Sega Mega Drive: Only through AV-RCA adapter (port 3.5 mm on the back panel) P1).

Important: Xiaomi P1 does not support the connection of consoles through USB-OTG video-output - port USB Type-A is only for media playback.

If your console is not on the list, check its technical specifications for support. HDCP 2.2 (required for Xiaomi) P1 higher-permission 1080p). Outdated models (e.g. Dune) HD Base 3D) The menu may not be displayed correctly due to restrictions. HDMI 1.4.

Connection via HDMI: step-by-step instructions

Standard way of connecting - use HDMI-- On the Xiaomi cable. P1 readily available 3 port HDMI (two — HDMI 2.1 supportive 4K@120Hz. Follow the algorithm:

1. Select the port: for the consoles with 4K use the connectors HDMI 1 HDMI 2 (labeled as eARC).
2. Connect the cable: insert one end into the console, the other into the TV, avoid cheap cables without Ultra High Speed certification.
3. Turn on the console: wait for the load (the indicator on the case should burn green).
4. Select the source: on the Xiaomi remote P1 Press Source (button with square icon with arrow) and select the appropriate HDMI-port.

If the image does not appear:

• 🔄 Restart the set-top box and TV (turn off power for 30 seconds).
• 🔧 In the console menu, set the permission 1080p@60Hz (for Xiaomi) P1 This is the optimal autodetermination regime).
• 🛠️ Check the settings. HDMI-CEC In Settings → System system → HDMI-CEC (Turn off if the console conflicts with the remote control).

Advice for gamers: if you connect PS5 Xbox Series X, in the console settings, enable Dolby Vision for games – Xiaomi P1 Supports this function, but it is disabled by default.

3. Alternative ways of connecting (AV, USB, Wi-Fi)

If your device is not equipped HDMI Or the port on the TV took another device, consider alternative options:

3.1 Connection through AV (RCA 3.5 mm)

For retro set-top boxes (NES, SEGA) or old satellite receivers:

1. Buy an adapter. AV→HDMI (For example, Portta PET0301S) or use the 3.5mm AV-in port on the back P1.
2. Connect the console to the adapter using a cable RCA («tulip»).
3. Select the source. AV on the TV menu (may be called Composite or Analog login).

⚠️ Attention: When in use AV→HDMI-The adapter can delay the signal up to 100-150 ms, which is critical for games.

3.2. Wireless connection (Miracast, AirPlay)

Some Android consoles (Xiaomi Mi Box, NVIDIA Shield) supports screen broadcast over Wi-Fi:

1. On the console, turn on Miracast (Settings) → Display. → Wireless display).
2. Xiaomi. P1 Go to Settings. → Connections → Miracast and select the device.
3. Confirm the pairing on both devices.

Limitations:

• 📶 Maximum authorization — 1080p@30Hz (depends on the speed of Wi-Fi).
• 🎮 Delayed input up to 50 ms (unsuitable for shooters).
• 🔋 Increased battery consumption on portable consoles.

3.3 Connection through USB (media-only)

Xiaomi P1 does not support the output of video from consoles through USB, You can play content from external storage devices:

1. Connect a flash drive or hard drive to the port USB 3.0 on TV.
2. Open the Files or Gallery app.
3. Select a video/audio file to play.

Formats supported P1:

4. Sound tuning: HDMI ARC, eARC and external systems

One of the frequent problems when connecting consoles to Xiaomi P1 — No sound or distortion, it's due to the settings. HDMI ARC/eARC And we're going to look at the solutions:

4.1. Setting up HDMI ARC/eARC

If you use HDMI ARC (Audio Return Channel for sound transmission to soundbar or receiver:

1. Connect the console to the port HDMI 2 (labeled as eARC).
2. Go to Settings. → Sound. → HDMI ARC and turn on the option.
3. In the console menu, select the sound format PCM (If Dolby Digital is not played).

⚠️ Note: When connecting Apple TV 4K Xiaomi P1 Solution: Turn off Dolby Atmos in Apple's settings TV.

Manual control of audio output

If the sound is present but is distorted or delayed:

• 🔊 On the Xiaomi remote P1 press Settings. → Sound. → Sound mode and select Stereo (to eliminate echoes).
• 🎵 In the console menu, turn off the sound processing (DTS:X, Dolby Surround).
• 🔄 Restart both devices by holding the power button for 10 seconds.

💡

If the sound is lost when switching channels on the satellite console, check the settings. AC3 Disable this option - Xiaomi P1 Does not support audio transcoding on the fly.

5. Image optimization: resolution, HDR, frame-rate

Once connected, the image may appear blurred, dark, or with artifacts, due to a mismatch between output and Xiaomi capabilities. P1. Set up the following parameters:

Selection of permission and frame rate

Optimal settings for different scenarios:

How to change the settings on the console:

1. Android. TV: Settings → Display and sound → Permission.
2. On Apple. TV: Settings → Video and audio → Format.
3. On satellite consoles: usually Menu → Image settings → Permission.

Calibration HDR brightness

If HDR-The content looks too dark:

• 🌓 On the Xiaomi remote P1 press Settings. → Picture → Regime. HDR and choose the Game or the Movie.
• 🔆 Increase the brightness parameter HDR before 50-60%.
• 🎨 In the console menu, turn off Autobrightness (for example, on the NVIDIA Shield: Settings → Display. → AI Upscaling).

💡

For game consoles (PS5, Xbox) be sure to turn on the Game mode in the Xiaomi settings P1. This will reduce the input delay to 10-15 ms.

6. Troubleshooting: No signal, artifacts, lags

If after connecting the console, the TV does not see the device or the image is unstable, use the checklist:

No signal (black screen)

Possible causes and solutions:

• 🔌 Faulty cable: Try another one HDMI-cable (preferably with Premium Certified label).
• 🔄 Conflict HDMI-CEC: turn off HDMI-CEC In Settings → System system → HDMI-CEC.
• 🖥️ Incompatible resolution: manually install on the console 1080p@60Hz.
• 🔋 Insufficient power: connect the console to the original power supply (not through the USB-television).

6.2 Artifacts or blurred images

If the image is "snowy" or split:

• 📶 Wi-Fi interference: switch router to 5GHz channel or move it away from TV.
• 🔧 Incorrect color profile: in the settings of the consoles, select RGB instead YCbCr444.
• 🔄 Reset HDMI-Port: Turn off the TV for 1 minute, then reconnect.

Sound or video delay (lags)

To eliminate the delay:

• 📡 Wi-Fi problems: Miracast router with Wi-Fi 6 support.

7.Configure the remote: control the console from the Xiaomi remote P1

Xiaomi P1 supports control of certain consoles through an integrated IR transmitter or HDMI-CEC. To set up:

1. Go to Settings. → Remote and accessories → Universal remote control.
2. Select the device type: TV, console or receiver.
3. Follow the on-screen instructions for sync (point Xiaomi remote to the console and hold the button down). OK flashing).

List of supported brands:

• 📺 Xiaomi Mi Box S, Mecool, NVIDIA Shield - Full support.
• 🛰️ Tricolor, MTS TV — only basic functions (channel switching, volume).
• 🎮 PS4/PS5, Xbox - only on/off through HDMI-CEC.

⚠️ Note: If after setting up the universal remote, the Netflix or Prime Video buttons on the Xiaomi remote stopped working P1, Reset the remote: press back + Home for 5 seconds.

8.Firmware Update: Why It Is Important for Compatibility

Regular firmware updates Xiaomi P1 They fix the compatibility errors with the consoles. MIUI TV 3.0.12 signal drop was eliminated HDMI when connecting Apple TV 4K, 3.1.5 adds Dolby Vision support for external sources.

How to update the TV:

1. Go to Settings → About TV → System Update.
2. Click Check for updates.
3. If a new version is available, confirm the installation (the process will take 10-15 minutes).

If the update is not installed:

• 📶 Check your Internet connection (minimum speed is 10 Mbit/s).
• 🔄 Restart the TV by holding the power button for 15 seconds.
• 📁 Download the firmware manually from the official Xiaomi website and install through USB.

💡

After the update, reset the settings. HDMI-Port settings: Settings → System system → Reset HDMI. This will eliminate possible conflicts with connected devices.

FAQ: Frequent questions about connecting consoles to Xiaomi P1