How to connect PlayStation 3 to Xiaomi TV: all ways and solutions to problems

Connecting the PlayStation 3 to a modern Xiaomi TV may seem like a trivial task, but in practice users face a number of nuances, from incompatibility of connectors to problems with screen resolution. PS3 (For example, CECHAxx or CECHBxx, which do not support HDCP 2.2 – standard, mandatory for many new Xiaomi TV (Mi TV Q2, Redmi Smart Fire TV).

In this article, we will analyze all possible ways of connecting - from the classical to the traditional. HDMI to alternative methods through AV-We will solve typical problems such as no signal, distorted image or lack of sound. TV, If your TV is released after 2020, the likelihood of conflict with the security policy is high. PS3 form ~30% - but it's solvable.

1.Preparation: What will be needed to connect

Before you connect the console to the TV, check for all the necessary components. The minimum set depends on the chosen connection method, but in 90% of cases, a standard kit out of the box is enough. PS3.

If you're Xiaomi. TV lacking AV-entrance (and this is typical for models thinner than 5 cm), you will have to use HDMI Or buy adapters. Pay attention to the version. HDMI-port-television: PS3 supports HDMI 1.3, while new Xiaomis are often equipped with HDMI 2.1 This is not critical for connection, but can affect picture quality at high resolutions.

• 🎮 PlayStation 3 game console (any model including Fat, Slim or Super Slim)

Modern Xiaomi TV They are often devoid of analog inputs, so if your console does not support HDMI (For example, early CECHAxx models with a faulty port, you have to use an external converter. AV → HDMI — 1500-3000 rubles Cheap Chinese versions (up to 1000 rubles) can cause delays in sound or image.

Connection via HDMI: step-by-step instructions

This is the most reliable and high-quality method, but it requires a serviceable one. HDMI-The port on the console and the TV. TV Released after 2019, disable the function before connecting HDMI-CEC In the settings, it may conflict with PS3.

Follow the algorithm:

1. Turn it off. PS3 and Xiaomi TV from the outlet (not enough to put in standby mode!) This will reset the port cache and reduce the risk of device recognition errors.
2. Connect. HDMI-cable to the console (the connector is on the back) and the TV. Use the port HDMI 1 HDMI 2 – They usually take priority in the autodetermination of the source.
3. Turn on the TV and go to the signal source: on the Xiaomi remote, click Input (or Source) and select the appropriate one. HDMI-port.
4. Turn it on. PS3, Holding the power button for 5-7 seconds (up to the second beep) will reset the resolution settings and force the console to use the base parameters. 480p.

If the image does not appear:

• 🔄 Try another one. HDMI-TV-port.
• 🔧 Go to the settings of Xiaomi TV Devices section → HDMI and enable the option Compatibility Mode (if available).
• 📶 Make sure the cable is not damaged – check it on another device (such as a console or laptop).

3. Alternative ways of connecting (AV, SCART, component-cable)

If HDMI-port PS3 Faulty or your Xiaomi TV It doesn't have analog inputs, so you'll have to use adapters:

3.1 Connection through AV-cable (RCA, "tulip")

This method is suitable for models PS3 Fat and Slim, but requires an external converter as new Xiaomi TV lacking AV-The average cost of the adapter AV → HDMI — 2000 rubles (we recommend Portta or Neoteck models).

Procedure:

1. Connect. AV-cable (included in the package) PS3) console.
2. Connect the other end of the cable to the converter.
3. Connect the converter to Xiaomi TV through HDMI.
4. Turn on the power of the converter (if required) and select the appropriate source on the TV.

⚠️ Note: Cheap converters may not support higher resolution 480i, Before you buy, check the specifications for support. 480p/576p.

3.2 Connection through SCART

Relevant for European models PS3, kitted SCART-Adapter. To connect to Xiaomi TV need to:

• 🔌 SCART-cable (from console)
• 🔄 adapter SCART → HDMI (cost of 2500 rubles)
• 📶 Power supply for the adapter (if required)

The image quality will be worse than the HDMI, But this method works even with a damaged digital port on the console.

Component cable (YPbPr)

Best alternative HDMI for old Xiaomi TV (until 2018, where Component inputs are still stored. YPbPr cable transmits the signal in resolution to 1080i, comparable HDMI The cost of the original cable from Sony – about 3000 rubles.

Connection:

1. Connect the cable to the connector. AV Multi Out on the back panel PS3.
2. Connect the other end to the Component inputs on the TV (color labeling: red, green, blue for video) + red/white for audio).
3. In the settings PS3 Go to Settings. → Display settings → Video resolution and select YPbPr.

4. Adjustment of resolution and sound to PS3 Xiaomi TV

Even if the connection is successful, there may be problems with screen resolution or sound. PS3 The default is trying to output the highest possible resolution, which is not always supported by Xiaomi. TV.

To adjust the parameters manually:

1. Hold the power button. PS3 5-7 seconds before the second beep – this will reset the display settings.
2. After downloading, go to Settings → Display settings.
3. Choose. HDMI (or alternative method of connection).
4. In the section "Allowance" tick all supported modes (we recommend leaving only 480p, 720p and 1080i stability).
5. In the section Sound settings select HDMI (if the connection is digital; or AV Multi Out (for analog connection).

For Xiaomi TVs with resolution 4K (Mi TV Q2 75, Redmi Max 98" may need to disable scaling:

1. On the Xiaomi remote, press Settings (cogs).
2. Go to Image. → Additionally. → Scope.
3. Choose Exact or 1:1 (Pixel Perfect)

💡

If, after the connection, HDMI The image appears only after 10-15 seconds, turn off in the settings Xiaomi TV Quick start function HDMI (section Devices → HDMI). This will eliminate the device recognition delay.

5. Solving typical connection problems

Even with the right connection PS3 Xiaomi TV There may be errors. Let's look at the most common ones and how to fix them.

"No signal" or black screen

If the TV shows No signal after the console is turned on, follow the following steps:

• 🔄 Reboot both devices: Turn off PS3 Xiaomi TV plug-in for 1 minute.
• 🔧 Check it out. HDMI-Port: Connect another device to your TV (such as Android) TV) via the same cable.
• 📶 Reset the display settings: Hold the power button PS3 7 seconds to second signal.
• 🔍 Update the TV firmware: Go to Settings → On TV. → Updating the system.

⚠️ Attention: If Xiaomi TV Released after 2021, it could lock older devices due to policy HDCP. In this case, only the rollback of firmware (not recommended for beginners) or the use of HDMI-splitter HDCP 1.4.

5.2.There is sound but no image (or vice versa)

This problem is typical for connecting through AV-converter HDMI-cable.

• 🔊 If you have sound but no image: Check if the TV is switched to another source. PS3 right-handed (HDMI or AV Multi Out).
• 🖼️ If there is an image but no sound: In settings PS3 Go to Settings. → Sound. → Audio output and select HDMI. Check if the sound on the TV is turned off (Mute button).

Image blurred or with artifacts

This is typical for analog connections (AV or SCART). To improve quality:

• 🔧 Use a high-quality converter with support 480p (For example, Portta PET0301S).
• 📏 In the Xiaomi settings TV disable all image enhancement functions (Noise Reduction, MRC).
• 🔄 Try another one. HDMI-cable (preferably with ferrite rings to suppress interference).

💡

If, after connecting through HDMI This image appears in a greenish or pinkish tinge, which indicates that the cable is damaged. Replace it with a new one, and even micro-cracks in the pellet can distort the signal.

6. Optimization of gameplay on Xiaomi TV

To play PS3 via Xiaomi TV It was comfortable, set up the TV for minimal input lag, which is especially important for shooters and fighting games, where every millisecond counts.

Recommended settings for Xiaomi TV:

• 🎮 Image Mode: Select Game or Sports (in these modes post-processing and zooming are disabled).
• 🔍 Additional functions: Disable: Motion Smoothing Noise Reduction Dynamic Contrast)
• 🔊 Sound: Set the Stereo mode (for the HDMI) or PCM (for AV), Avoiding Delays in Dolby Digital Decoding.

To check the input delay (input lag), you can use the test in the game Gran Turismo 5 (Settings section). → Response test) or specialized utilities on Android TV (For example, the Game Mode Latency Test, which is normal for Xiaomi. TV — 15-30 ms in game mode.

⚠️ Note: On Xiaomi TVs with 120 Hz refresh rate (Mi) TV Q2 2023: Screen tearing may occur in fixed-frequency 60 games FPS. To fix the problem, turn on the settings PS3 Option Smoothing (Settings) → Display settings → Additionally).

7. Connect the DualShock 3 gamepad to Xiaomi TV

If you plan to play on PS3 via Xiaomi TV without the console itself (for example, using an emulator) RPCS3 Android TV), You'll need to connect the DualShock 3 gamepad directly to your TV. This is only possible for Xiaomi Android models. TV 9.0+ (Like Mi. TV 5 Pro or Redmi Smart TV X).

Instructions for connection:

1. Turn Bluetooth on on Xiaomi TV: Go to Settings. → Devices → Bluetooth.
2. On the DualShock 3 gamepad, press the button. PS (PlayStation logo) and Share for 3 seconds at the same time – the indicators will start flashing.
3. In the list of available devices on your TV, select the Wireless Controller.
4. After connecting, check the buttons in the test menu (Settings) → Devices → gamepads).

If the gamepad is not connected:

• 🔋 Check the battery charge (connect the Mini-USB cable to charging).
• 🔄 Reboot Xiaomi TV and try again.
• 📱 Use it. USB-OTG Adapter for connecting the gamepad over the wire (works on all Xiaomi models) TV s USB-port).

💡

For game emulation. PS3 Xiaomi TV We recommend using the application RPCS3 (It requires a powerful processor, such as the Mi. TV Q2 2023 with Amlogic T982). Download it from the official website and follow the instructions for setting up BIOS.

8. Frequently Asked Questions (FAQ)