How to Connect Xiaomi Mouse: Instructions for All Devices and Error Solving

Xiaomi’s wireless and wired mice have gained popularity thanks to a combination of affordable prices, minimalist design and reliable performance. However, even with such simple devices, users are asking questions about how to properly connect a mouse to a computer, laptop or even a smartphone, what to do if a device is not determined by the system, and how to set up additional buttons. This article covers all scenarios, from basic Bluetooth synchronization to solving rare driver errors.

The feature of Xiaomi mice (for example, Mi Wireless Mouse, Mi Portable Mouse or Mi Gaming Mouse) is versatility: they can be used not only from a Windows PC or macOS, but also with Android devices, Mi TVs and other devices. TV The connection process may vary depending on the type of connection (wired). USB-A/USB-C, Bluetooth 4.0/5.0 radio-channel 2.4 GHz) and mouse models, and then we'll go through each case separately, and we'll also give you recommendations for how to fix the typical problems.

1. Determine the type of connection your Xiaomi mouse

Before you start setting up, it’s important to understand what type of connection your model supports, which affects the choice of instructions and possible nuances.

• 🔌 Wired Mouse (Mi Wired Mouse, Mi Gaming Mouse Lite) USB-A or USB-C. Do not require drivers for basic work, but may need proprietary software to configure buttons.
• 📶 2.4 GHz Wireless Mouse (Mi Wireless Mouse, Mi Silent Mouse) USB-It's a receiver (sometimes built into the case) that doesn't have Bluetooth, but it's occupied by USB-port.
• 🔵 Bluetooth Mouse (Mi Bluetooth Mouse, Mi Portable Mouse) 2): Connected via Bluetooth protocol 4.0/5.0. Compatible with most devices, but may require manual synchronization.
• ⚡ Universal models (Mi Dual Mode Wireless Mouse): support both 2.4 GHz and Bluetooth radio.

To find out the exact type of mouse you have, look at a box or sticker on the bottom of the device, like a Bluetooth 5.0 or a Bluetooth 5.0 sign. 2.4G Wireless will point to protocol. USB-a receiver (a small flash drive), it is exactly a model with a radio channel.

2. Connecting Xiaomi wired mouse to a PC or laptop

Wired models (Mi Wired Mouse, Mi Gaming Mouse) are as simple as possible, but there are nuances here, too. Consider the process for Windows and macOS.

For Windows 10/11:

1. Insert the mouse cable in the free USB-A or USB-C computer port. USB-C, and the mouse USB-A, use the adapter.
2. Wait for the connection audible signal (if system sounds are enabled) or check the notification in the lower right corner of the screen.
3. Open the Start. → Parameters → Devices → You can set the speed of the pointer, the scroll, the buttons.

For macOS:

1. Connect the mouse to the port. USB-A or USB-C (Use an adapter if necessary).
2. Go to System Settings → If the mouse is undecided, try restarting the Mac.
3. In the settings, adjust the speed of movement, the direction of scrolling and the assignment of buttons.

⚠️ Note: If the Xiaomi mouse doesn’t work after you connect, check it out:

• Correction of the cable (try another one) USB-port).
• Drivers are available (usually installed automatically, but game models may require Mi Mouse Driver from the official website).
• Port performance (plug in another device, such as a flash drive).

💡

If the Xiaomi mouse is defined as an “Unknown device”, download the driver from the official Xiaomi website by selecting your model in the “Support” section.

3. Connecting Xiaomi wireless mouse over 2.4 GHz radio channel

Mi Wireless Mouse (2.4GHz) does not require Bluetooth, but has its own nuance: USB-The receiver must be inserted into the port before the mouse is turned on, otherwise the system may not recognize the device.

Step-by-step:

1. Put it in. USB-The receiver (usually hidden in the mouse battery bay) is in the free port of the computer. Use the port on the back of the system unit so that the signal will be more stable.
2. Turn the mouse on with the switch on the bottom (position) ON).
3. Wait 10-15 seconds for the system to install the driver (Windows may see a notification “Device ready to use”).
4. Check the mouse by moving the cursor. If the pointer doesn't move, restart the computer.

⚠️ Note: Some Xiaomi models (e.g. Mi Dual Mode Wireless Mouse) have dual mode.If the mouse is not connected via radio, make sure the switch on the bottom is set in position 2.4G, not BT (Bluetooth).

4. Connecting Xiaomi mouse over Bluetooth

Bluetooth mouse (Mi Bluetooth Mouse, Mi Portable Mouse 2) are versatile, but their synchronization may vary depending on the operating system. Consider the process for Windows, macOS and Android.

For Windows 10/11:

1. Turn the mouse (switch to the bottom in position) ON).
2. Press the pairing button (usually located next to the power switch) for 3-5 seconds until the indicator starts flashing.
3. On the computer, open Start. → Parameters → Devices → Bluetooth and other devices.
4. Click Add Bluetooth or another device → Bluetooth.
5. Select from the Mi Bluetooth Mouse (or similar name) list and wait for the connection.

For macOS:

1. Activate the mouse and put it in pairing mode (blinking indicator).
2. Open System settings → Bluetooth.
3. In the list of available devices, find Mi Mouse and click Connect.
4. If you have a request to enter the code, try 0000 or 1234.

For Android (smartphone or tablet):

Many Xiaomi mice are compatible with Android devices, but this requires a OTG-Adapter (if the mouse is wired) or Bluetooth support.

1. Turn on Bluetooth on your smartphone (Settings → Connections → Bluetooth).
2. Activate the pairing mode on the mouse (blinking indicator).
3. In the list of available devices, select Mi Bluetooth Mouse.
4. After connecting, a cursor will appear on the screen (in some firmwares you need to turn on the Mouse mode in the special features settings).

⚠️ Note: Not all apps on Android support mouse control. For example, some games may not display the cursor. Also note that scrolling may work differently than on a PC.

5. Connecting Xiaomi mouse to Mi TV TV

Mi TVs TV (Android-based TV Google TV) Supports mouse connectivity both via Bluetooth and via USB-2.4 GHz receiver. It's convenient for navigating menus or surfing the web.

Bluetooth:

1. Turn on the mouse and put it in pairing mode.
2. On the Mi remote. TV press the Settings button (cogs).
3. Go to Settings → Devices → Bluetooth.
4. Select Mi Bluetooth Mouse from the list and confirm the connection.

Po Po Po USB (2.4 GHz):

1. Put it in. USB-porter USB-A on the TV (usually sideways).
2. Turn on the mouse – the cursor should appear on the screen automatically.
3. If the mouse is not working, restart the TV (Settings) → On TV. → Reboot).

Important: On Mi TVs TV If you have firmware older than 2021, you may not have wheel scrolling in some applications (like YouTube), which is a system limitation, not a mouse.

6. Set up additional buttons and drivers

Many Xiaomi mice (especially gaming or premium models) have additional buttons that may not work by default.

Installation of drivers for Windows:

1. Download Mi Mouse Driver from the official website by selecting your model.
2. Install the program and restart the computer.
3. Open the Mi Mouse Center (usually appearing in the tray or Start menu).
4. Assign functions to additional buttons (e.g., back, change) DPI launch).

Setup on macOS:

For macOS, there is no official software from Xiaomi, but you can use universal utilities:

• 🖱️ USB Overdrive – allows you to reassign buttons and adjust sensitivity.
• 🎯 SteerMouse supports most mice, including Xiaomi.

⚠️ Warning: If the mouse stops working after installing the drivers, delete the program and restart the computer.

💡

The proprietary Mi Mouse Driver software is needed only to configure additional buttons. For the basic operation of the mouse (cursor movement and clicks), drivers are not required. - they are installed automatically.

7. Solving common problems

Even with simple devices like a mouse, you can get bugs, and let's look at typical scenarios and how to fix them.

If the Xiaomi mouse does not respond to the connection at all, try resetting its settings:

1. Turn off the mouse (switch to position) OFF).
2. Press the left and right buttons at the same time.
3. Without releasing the buttons, turn on the mouse (switch to the switch). ON).
4. Hold the buttons clamped for 5-10 seconds until the indicator blinks 3 times.

After resetting, reconnect the mouse as if it were new.

8.Compatibility of Xiaomi mice with other devices

Xiaomi's mouse is not just for computers, but here are some non-obvious scenarios:

• 📱 Smartphones and tablets: Connect Bluetooth mouse to Xiaomi/Redmi/Poco easy to control (especially useful for presentations or games with mouse support).
• 🖥️ Monitors with USB-Hub: Some monitors (such as the Mi Surface Display) have built-in USB-Ports – You can connect your mouse directly to them.
• 🎮 Game consoles: Bluetooth mice are compatible with Steam Deck or Android consoles (e.g. Nvidia Shield).
• 📺 Android TV-Connect your mouse to the Mi Box S or Nvidia Shield TV for easy navigation on the menu.

To connect to an iPad or iPhone will require a Bluetooth mouse and iOS 13+. However, the functionality will be limited – for example, not all applications will work scrolling.

FAQ: Frequent questions about Xiaomi mice