How to clean the Xiaomi vacuum cleaner: disassembly, washing and care for all details

Xiaomi vacuum cleaners are among the most popular cleaning assistants thanks to their combination of power, compactness and smart features. But even the most advanced technology requires regular maintenance: clogged filters, clogged brushes and a crowded dust collector reduce the efficiency of suction on the ground. 30-50%, In this article, we will discuss how to clean the vacuum cleaner Xiaomi of any model – from the budget Mi Robot Vacuum to the flagship Dreame and Viomi – taking into account the peculiarities of their design.

You will learn which parts to clean weekly and which every six months, which detergents are safe for plastic and rubber, and how to avoid common mistakes (such as washing). HEPA-The filter under running water is guaranteed to damage its structure, and we will also give recommendations for storing the vacuum cleaner so that it lasts longer without breaking down.

1.Preparation for cleaning: what will be needed and safety measures

Before you disassemble the vacuum cleaner, prepare the workspace and tools.

• 🧼 Soft brush (a tooth or brush for makeup is suitable) - to clean hard-to-reach places.
• 🧴 Liquid soap or dishwashing agent (without abrasives!).
• 💦 Warm water (not higher than 40)°C to prevent deformation of plastic).
• 🧻 Microfiber cloth or paper towels for drying.
• 🔧 Cross screwdriver (for some models, for example, Dreame) V11).
• 🧲 Magnet or tweezers – to extract small debris from brushes.

Important: disconnect the vacuum cleaner from the network (if it is a network model) or remove the battery (in robot vacuum cleaners). Some parts, such as the electronic modules in the Xiaomi Mi Robot Vacuum-Mop 2, can not be wet - this will lead to a short circuit. Also avoid aggressive chemicals: chlorine, vinegar or alcohol can damage seals and gaskets.

⚠️ Note: If your Xiaomi vacuum cleaner makes an unusual noise (screaming, whistling) or overheats during operation, do not start cleaning - this may be a sign of engine failure.

Cleaning of the dust collector and the garbage container

A vacuum cleaner is the heart of a vacuum cleaner that collects all the garbage, and in Xiaomi models, it's usually made in a transparent plastic container with a lid, to clean it.

1. Press the container opening button (on most models it is marked with an icon). 🗑️).
2. Remove the container and shake the garbage out of the bin. Don't knock them against the walls of the bucket, it could damage the seal.
3. Wash the container with warm water and soap, paying attention to the corners and ribs where the dust accumulates.
4. Dry the part in the air (do not use a hair dryer or battery!).

In robot vacuum cleaners (such as the Xiaomi Mi Robot Vacuum-Mop P), the container is often combined with a filter, in which case, first remove the filter (usually mounted on latches), and then rinse the container itself. Pay attention to the O-ring - it must be wiped with a damp cloth, but not wetted heavily so as not to break the seal.

Remove the container from the vacuum cleaner

Hand-removing large debris

Rinse with warm water with soap

Dry for at least 2 hours

Check the sealing ring for integrity-->

In some models (e.g. Dreame) V12) The container has an additional cyclone filter, a small mesh inside, and it needs to be cleaned separately with a soft brush, because it is responsible for pre-filtration of air.

Cleaning of filters: HEPA, cyclone

Filters are the most important element of the vacuum cleaner, which depends on the quality of cleaning and the life of the equipment.

• 🌀 Cyclone filter (primary air cleaning from large debris).
• 🧹 HEPA-filter (detains fine dust, allergens, bacteria).
• 💧 Cleaning filter (in some models, for example, Viomi) V3).

The method of cleaning depends on the type of filter:

Pay special attention HEPA-In Xiaomi Mi Air Purifier models and some vacuum cleaners it has a marking. H11 or H13 — This indicates a filter class, which you can't wash with water, you can't just splash it, you can clean it with a brush, and if it breaks or it's deformed, you can replace it with a new one, otherwise it will spread the dust back into the air.

⚠️ Attention: After cleaning HEPA-filter efficiency is reduced by 10-15%. If you are allergic or have pets in your home, it is recommended to change the filter every time. 6 months, even if it looks clean.

4.Brushing: main, turbobrush and side

Brushes are the hands of a vacuum cleaner that are in direct contact with the floor, and depending on the model, you may have:

• 🌀 Main brush (with pile or rubber blades).
• 🌀 Turbobrush (for carpets, with motor).
• 🧹 Side brushes (for cleaning along the walls).

For cleaning the main brush:

1. Remove the brush from the vacuum cleaner (usually it is attached to latches or screws).
2. Remove the wound hair, thread and fur of animals, and it is convenient to use scissors or tweezers.
3. Wash the brush with warm water if the pile is heavily contaminated. for rubber blades (like in Dreame) V12) use a soft sponge.
4. Dry the brush in a horizontal position so that the pile does not deform.

The turbobrush requires more careful care. In Xiaomi Mi Robot Vacuum-Mop 2 Pro models, it has its own motor that cannot be wet. Clean only the outside of the brush with a dry cloth or brush. If the turbobrush stops rotating, check:

• 🔌 Contacts on the body of the brush (sometimes they are oxidized).
• 🌀 Bearings – if they are clogged, the brush will wed.

Side brushes are less common, but they often collect hair and debris at the attachment points. Take them off the vacuum cleaner (usually they just pull out) and rinse underwater. If the brush cracks or the pile wears, replace it, otherwise the vacuum cleaner will be worse to clean along the boards.

💡

To make the hair less wound on the brush, before cleaning, brush the carpets or use special nozzles with an anti-curl coating (there is a set of Dreame). T30).

5 Care for hose, pipe and vacuum cleaner nozzle

The hose and the vacuum cleaner pipe get clogged with dust over time, especially if you're cleaning up construction debris or animal wool.

1. Disconnect the hose from the vacuum cleaner body (in most Xiaomi models this is done by pressing a button or turning counterclockwise).
2. Pass a flexible brush through the hose (you can use a rush to wash bottles) or wash it with water under pressure.
3. To remove greasy spots (if the kitchen was cleaned with a vacuum cleaner), use a solution of water with soda (1 tbsp. spoon per 1 liter of water).
4. Dry the hose by hanging it vertically (for example, on a hanger).

The nozzle is easier to clean: remove, rinse underwater and wipe with a cloth. Pay attention to rubber seals - if they are hardened or cracked, they need to be lubricated with silicone lubricant (sold in hardware stores).

In wet vacuum cleaners (such as the Xiaomi Mi Robot Vacuum-Mop 2 Lite), the hose can have additional water channels. They can not be washed under strong pressure - use a soft sponge and neat movements.

⚠️ Attention: If the vacuum cleaner is getting worse after cleaning the hose, check the corrugated areas - they may have clogged or broken.

Cleaning of the engine and internal channels (for experienced users)

If Xiaomi vacuum cleaner is noticeably less absorbable, even after cleaning all filters and brushes, the problem may lie in clogged internal channels or dust on the engine. This procedure requires care and is only suitable for users who are not afraid to disassemble the equipment.

First, check the inlet of the vacuum cleaner (where the hose is attached), often there is a collection of debris that blocks the flow of air, use a flashlight and tweezers to remove foreign objects.

If you need to get to the engine (for example, in Dreame) V11):

1. Remove the bottom cover of the vacuum cleaner (usually it is attached to the 4-6 screw).
2. Gently blow the dust off the engine with a compressor or a spray of compressed air (do not use a vacuum cleaner!).
3. Check the impeller (blade wheel) - if it is wound hair, remove them with tweezers.
4. Collect the vacuum cleaner in reverse order, making sure all seals are in place.

In robot vacuum cleaners (such as the Xiaomi Mi Robot Vacuum-Mop 2 Pro), the engine is hidden under the top cover.

1. Turn the vacuum cleaner over and unscrew 4 screws on the bottom.
2. Remove the top panel (carefully so as not to damage the wires!).
3. Check the turbine for debris and clean it with a brush.

If you are not sure of your abilities, it is better to contact the service center. Incorrect assembly can lead to loss of leakage and failure of the vacuum cleaner.

💡

Cleaning the engine is a last resort, and 90 percent of the power drop is due to clogged filters or hose. Start with them!

7 Storage and prevention: how to prolong the life of a vacuum cleaner

Proper storage of Xiaomi vacuum cleaner is as important as regular cleaning.

• 🏠 Keep the vacuum cleaner dry, away from batteries and direct sunlight. Humidity and heat accelerate the wear of plastic and rubber.
• 🔌 If the vacuum cleaner is networked, wind the cord on special holders (if they are included) to avoid overburdens.
• 🔋 In robot vacuum cleaners (Xiaomi Mi Robot) before long downtime (for example, during vacation) remove the battery and store it when charged. 40-60%.
• 🧹 After each cleaning, shake the trash out of the container and wipe the brushes with a dry cloth.

For prevention of blockages:

• 🚫 Do not clean the building debris (sand, plaster, sawdust) with a vacuum cleaner - it will quickly clog the filters.
• 🐕 If you have pets in your home, clean your brushes and filters once a week.
• 🌿 For cleaning leaves or grass, use special nozzles (if they are included in the kit).

If you use a vacuum cleaner for wet cleaning (for example, Viomi) V3), after-clean:

1. Empty and wash the water tank.
2. Dry the cloth or washing module.
3. Wipe the contacts on the base (if the vacuum cleaner is self-charging).

Compliance with these rules will help to avoid 80% of breakdowns associated with improper operation.

8.Frequent mistakes when cleaning Xiaomi vacuum cleaner

Many users make mistakes that shorten the life of the vacuum cleaner, and here are the most common:

1. Washing HEPA-It destroys the structure of the filter, and it stops trapping fine dust. Right: propylesic or clean it with a brush.
2. Use of aggressive detergents: Chlorine, vinegar or acetone spoil plastic and rubber seals. Use only soft detergents (such as Fairy or Baby Line).
3. Dry parts with a hair dryer or on a battery. High temperatures warp plastic. Dry parts at room temperature.
4. Cleaning the vacuum cleaner without disconnecting from the mains. It's life-threatening! Always take the plug out of the socket or remove the battery.
5. Ignoring strange sounds, whistling, or knocking are signs of a breakdown, and if cleaning doesn't work, take the vacuum cleaner to the service.

Another mistake is that you don't replace consumables regularly, and filters, brushes and seals wear out over time, and the instructions for each Xiaomi model indicate the lifespan of the parts, HEPA-filter V11 It is recommended to change every 6 months, and side brushes - once a year.

If you bought a used vacuum cleaner, be sure to disassemble and clean it completely before first use. The previous owner may not have cared for the appliances, and there may be dust accumulations or even mold inside.

💡

Before the first cleaning with the new vacuum cleaner Xiaomi turn it on at maximum power on the 1-2 It's a little bit of a balcony or a little bit of a street, and it'll blow out the internal ducts of the dust.

FAQ: Answers to Frequent Questions