How to fix Xiaomi Airdots headphones 2: The Complete Guide

Users of the popular Xiaomi Airdots 2 model often face a situation when one of the headphones stops working or the devices refuse to sync with each other. Owners begin to panic, believing that the gadget has failed completely, but in most cases the problem lies in a software failure or contamination of contacts. Before carrying the device to the service center or buying a new pair, it is worth trying to conduct a series of diagnostic procedures yourself.

This article is a detailed guide to help you bring wireless headphones back to life without unnecessary costs.We will discuss methods for hardware reset, cleaning contacts and software flashing through special utilities. By following the instructions carefully, you will be able to eliminate 90% of the typical malfunctions characteristic of this line of devices.

Sometimes the problem can be trivial, like discharging a case or oxidizing contacts from sweat. It's important to take your time to draw conclusions and consistently check for all possible reasons for failure. A competent approach to diagnosis will save time and money by returning the comfort of listening to music or communicating on the phone.

Diagnostics of major malfunctions

The first step in the recovery process is to accurately identify the symptom. Often users confuse the software glitch with physical damage to the battery or speaker. If the Mi True Wireless Earbuds Basic 2 is not turned on, you should not immediately disassemble the case.

The most common problems faced by owners include desynchronization of the left and right channel, when the sound is only on one side. Also common is the failure of the case to charge the headphones or the inability to pair with a smartphone. In some cases, the device is visible in the Bluetooth list, but the connection does not occur.

⚠️ Attention: If the headphones fall from a high altitude or have been submerged in water, a software reset may not help.

To get a better understanding of the situation, you should pay attention to the flashing of indicators. Different colors or frequency of blinking can indicate a specific error. For example, a quick flashing in red often indicates a critically low charge, while a lack of response can indicate a failure of the power controller.

• 🔋 Headphones do not charge in the case - a problem with contacts or battery.
• 🎵 There is only one sound in the headphone – desynchronization of channels TWS.
• 📱 The device is not a phone – the Bluetooth module crashes.
• 🔊 Hoarse sound or its absence - damage to the speaker membrane.

Understanding the nature of the malfunction allows you to choose the right algorithm for action, if the problem is hardware-related, such as battery bloating, then the software methods will be useless, but if it is the logic of the controller, then the chances of successful recovery are very high.

Methods of hardware resetting settings

The most effective way to eliminate software errors is to completely reset the settings to factory.This procedure clears the pairing memory and forces the Xiaomi Airdots 2 controllers to re-enter the initialization procedure.

There are two main methods of resetting: through touch panels and through hidden buttons (if modification allows). The standard version of Basic 2 uses the method of holding the sensors. Before starting the procedure, it is recommended to remove the device from the Bluetooth list on the smartphone to avoid conflicts when reconnecting.

Resetting requires timing accuracy, so you need to remove both earbuds from the case and touch the sensory areas at the same time, hold your fingers until the lights flash red several times, and signal that the memory is cleared and the devices are ready for a new one.

After a successful reset, the headphones usually go into search mode. At this point, it is important not to connect them to the phone right away. Give them a few seconds to find each other. Usually the right headphone (Master) starts flashing white, and the left (Slave) will slowly blink or fade, waiting for a connection to the master device.

• 🔄 Remove the device profile from your phone's Bluetooth settings.
• 📥 Place both headphones in the charging case.
• 👆 Remove them and press the touch panels on 20-30 seconds.
• 💡 Wait for the red flashing of the indicators.

If the headphones don't connect after reset, one of them may have been stuck in standby mode. Try putting them back in the case, close the lid for 10 seconds and retract them. Sometimes you need to repeat the reset procedure 2-3 times to guarantee a result.

Problems with charging and contact

One of the most common reasons why Xiaomi Airdots 2 stops working is the banal lack of charge due to the oxidation of contacts. During operation, earwax, dust and oxides accumulate on the metal headphones and inside the case, which prevent current from passing, which leads to a situation where the indicators do not light up when placed in the case.

To solve this problem, you need to do a neat mechanical cleaning. Use a cotton swab dipped in alcohol or a special electronics cleaner. Do not use water, because getting moisture inside the case can permanently disable the electronic board. Carefully wipe the contacts on the headphones themselves and the pins inside the case.

⚠️ Note: Do not use metal objects (needles, scissors) to clean the contacts inside the case, so as not to close the chain or damage the insulation of the wires.

After cleaning, leave the devices for 15-20 minutes to completely dry the alcohol. Then place the headphones in the case and connect it to the charger. If the contacts were contaminated, the indicators should light up, signaling the start of charging. If this did not happen, the problem may be in the charging cable itself or the power supply.

💡

Use a soft bristling toothbrush to remove persistent contaminants from the speaker mesh, but do so very carefully so as not to push the dirt deeper.

Also worth checking is the voltage at the charger output. Mi True Wireless Earbuds Basic 2 is sensitive to charging current. Using powerful fast charging units from smartphones can sometimes cause a controller to react defensively and charging won't go. USB-port.

In some cases, contact may be disrupted by deformation of the earpiece, if you pressed the earpiece hard to insert it into the ear, the pencils may have shifted, and carefully press your finger (through a napkin) to see if a reaction occurs.

Restore TWS synchronization

TWS (True Wireless Stereo) technology means that one earbud is a master device and the other is a slave. The signal from the phone goes to the wizard, which transmits it to the second headphone. If this bundle is broken, the sound will come from only one speaker, or the channels will be desynchronized, often after the headphones have connected to different phones.

To force Xiaomi Airdots 2 to find each other, you need to completely reset your connection history. After a standard reset (described above), don’t rush to turn on Bluetooth on your phone. First, wait until one of the headphones (usually the right one) flashes white quickly, and the other stops blinking or blinks slowly. TWS-linkage established.

If automatic synchronization doesn't happen, you can try hand-pairing, and you need to press the sensor of one of the headphones 5 times quickly (in some firmware, this puts it into mode), and then repeat the same with the second one.

If you have a lot of other Bluetooth devices nearby or a working microwave, the synchronization process can take a long time.

• 📶 Make sure both earphones are charged at least 50 times%.
• 🚫 Turn off Bluetooth on all devices within a 10 meter radius.
• 🔁 Completely reset both headphones at the same time.
• ⏳ Wait. 10-15 seconds to establish a connection between.

Once synchronized successfully, one device, "Mi True Wireless EBs Basic2," should remain on the Bluetooth list. If you see two identical names, the headphones are mono-mode and have not communicated, in which case you need to repeat the procedure.

Software solutions and flashing

If hardware methods didn’t help, the problem may be the damage to firmware (embedded software). For Xiaomi Airdots 2, there are ways to update or restore firmware, although tools for this are rarely available to the average user. However, the Mi Wear or Xiaomi Earbuds app (for Android) can offer a software update if the headphones are connected at all.

Check for updates in the app. Sometimes the manufacturer releases patches that fix connection errors and power consumption. The update process is critical: during this time, you can not close the application or remove the headphones from the phone.

⚠️ Warning: Never interrupt the firmware update process. If the battery runs out at this point, it will be impossible to restore the headphones without a programmer.

There are also third-party Android utilities that allow you to reset some Bluetooth stack settings, which sometimes helps in difficult cases. However, using untested software carries risks. A safer method is to connect to another type of device (for example, a laptop or tablet on iOS) to check if the problem persists.

💡

Updating the firmware through the official application is the only secure software method available to the user without special equipment.

In rare cases, a full battery discharge helps: leave the headphones on outside the case for a few days until they completely sit down and stop responding. Then put them on charge, a procedure that can restart the power controller at the hardware level.

When professional repairs are needed

Despite all the efforts, there are situations when the headphone repair is impossible at home. If after all the procedures of reset, cleaning and flashing devices do not show signs of life, most likely, the battery or charge controller failed. Replacing batteries in Xiaomi Airdots 2 is extremely difficult because of the monolithic design of the case.

Signs of irreversible failure include bloating (the earpiece stopped fitting into the case), the smell of burning, no reaction to charging after 2-3 hours of connecting to a serviceable cable. Also, the speaker says physical death without even hissing or cracking when trying to play sound at maximum volume.

The cost of repairing these devices is often questionable, and the cost of a wizard and parts can exceed the price of a new device, but if the headphones are warranty, be sure to contact a Xiaomi authorized service center.

• 🔋 Bloating of the battery inside the housing.
• 🔥 The appearance of a foreign smell during charging.
• 💧 Ingestion of liquid inside the body.
• 🔇 Total absence of sound after all types of reset.

In conclusion, most of the problems with Xiaomi Airdots 2 are solved by correct cleaning of contacts and competent resetting of settings.Be attentive to details, use quality charging cables and store the gadget in a dry place. This will extend the life of your wireless headphones and provide quality sound for a long time.