How to Reboot Xiaomi Redmi Note 7 if the screen is not working: all methods from simple to complex

Xiaomi Redmi Note 7 is one of the brand's most popular smartphones, but even it's not immune to hardware failures. If your phone suddenly stopped responding to touch, the screen went out or displayed artifacts, and rebooting through the menu is impossible, don't panic. In 80% of cases, the problem is solved by a forced reboot without connecting to a computer.

This article will take a look at all the available non-desktop reboot methods, from standard button combinations to advanced ADB and service utilities. We will also explain why a smartphone might not respond to buttons, and what to do if a conventional reboot doesn’t work. Importantly, some methods require pre-preparedness (e.g., USB debugging enabled), so read carefully.

1. Standard forced reset (Hard Reset)

The easiest and safest way is to reset hardware through a combination of physical buttons, which works even with a fully black screen, if the smartphone somehow gives signs of life (vibrates, warms, charges).

For the Redmi Note 7 (model lavender), the procedure looks like this:

1. Hold the Power button and Volume Up button at the same time.
2. Hold them for at least 10-15 seconds until the smartphone starts vibrating (a signal to start a reboot).
3. Release the buttons when you feel the second vibration (usually 1-2 seconds after the first one).

If your smartphone isn’t vibrating, but you’re sure it’s charged:

• 🔋 Check charging: connect to another cable/charger for 30 minutes.
• 🔌 Try to hold the Power buttons. + Volume Down (sometimes works on locked devices).
• 🕒 Increase retention time to 20-25 seconds – some firmware requires longer pressing.

⚠️ Warning: If the smartphone turns on after a forced reboot, but the screen remains black, the problem may be the display plume or the graphics chip, in which case a diagnosis is required at the service center.

2.Reboot via charging connection

If your smartphone is discharged or not responding to buttons, try initializing the reboot via a power connection, which works thanks to a built-in charging controller that can wake the system.

Instructions:

1. Connect the Redmi Note 7 to the original charger (minimum 5V/2A).
2. Hold the Power button for 30 seconds without letting go.
3. If the smartphone does not respond, turn off charging, wait 10 seconds and repeat steps 1-2.

This method often works if:

• 🔋 The battery is completely discharged (but the controller is still alive").
• 📵 The smartphone got stuck at the loading stage MIUI.
• 🔄 There was a failure in the touch screen, but the display is physically healthy.

⚠️ Note: If after connecting to charging the smartphone heats up more than 40°C, turn it off immediately! This could indicate a short circuit in the battery.

Reboot via battery retrieval (for power users)

The Redmi Note 7 battery is non-removable, but it can be briefly disconnected from the board to simulate a complete power outage, a risky method that requires care and is only suitable if other methods have not worked.

What you need:

• 🔧 Plastic blade or mediator.
• 🔥 Fryer (for softening glue).
• 🧲 Suction (optional, to lift the back cover).

Step-by-step:

Turn off your smartphone (if it reacts to buttons)|Water the back cover around the perimeter (1-2 minutes)|Get the cover clean with a plastic blade starting at the bottom corner |Disconnect the battery plume (don't pull the wires!)|Wait 5 minutes before reassembling-->

After the battery is turned off:

1. Wait 5-10 minutes (this is important for resetting the power controller!).
2. Connect the battery back, making sure the contacts are clean.
3. Close the lid and try to turn on your smartphone with the Power button.

⚠️ Warning: Do not use metal tools to lid the lid - this can damage antenna lines or plumes. If you are not sure about your skills, you should contact the service.

4.Reboot via ADB (if USB debugging was enabled)

If the smartphone has previously been activated debugging USB (USB Debugging, you can try restarting it via computer using ADB (Android Debug Bridge: This method works even in black screens if the system is booting in the background.

What needs to be done:

1. Install Platform Tools on your computer (Windows/macOS/Linux).
2. Connect the Redmi Note 7 to the PC via USB-cable (preferably original).
3. Open the command prompt (cmd) in the folder with adb.exe.
4. Enter the command: adb devices If the smartphone is determined (the serial number will appear), execute: adb reboot

If the adb device command returns an empty list:

• 🔌 Try another one. USB-cable.
• 🔄 Reinstall Xiaomi drivers (you can download on the official website).
• 🛠️ Check if debugging is enabled: on the working device, the Settings path → The phone. → Version. MIUI (press 7 times) → Additionally. → For developers → Debugging by USB.

💡

If adb reboot doesn’t work, try the adb reboot bootloader command – it will put the smartphone into fastboot mode, from where you can perform a full reboot.

5.Reboot via Fastboot mode

Fastboot mode is the service state of a smartphone from which you can reboot or run firmware, to get into it without the desktop:

1. Turn off your smartphone (if it responds to buttons).
2. Hold Power + Volume Down for 10-15 seconds at a time.
3. Release the buttons when you feel the vibration (or if the screen blinks).
4. Connect your smartphone to your computer and use the command: fastboot reboot

If the smartphone is not defined in fastboot:

• 🔌 Make sure you have Mi Flash drivers installed.
• 🔄 Try another one. USB-port (preferably) USB 2.0).
• 🛠️ In the command line, type in fastboot devices – if the list is empty, the problem is the connection.

From fastboot mode, you can also flash your smartphone through the Mi Flash Tool if a normal reboot does not help.

1. Download the firmware for Redmi Note 7 (model lavender) from Xiaomifirmwareupdater.com.
2. Unpack the archive and launch the Mi Flash Tool.
3. Select the firmware folder and click Refresh → Flash.

⚠️ Warning: Firmware via fastboot erases all data on your smartphone! Use this method only if other methods have failed and you have a backup.

6.When the reboot doesn't help: Diagnosing hardware problems

If neither method worked, the problem is likely hardware, and here are the most common reasons why the Redmi Note 7 doesn’t respond to the reboot:

How to check that the problem is in the “iron”:

• 🔊 Connect the headphones - if you hear sounds when restarting MIUI, but the screen is dead → phonogram.
• 🔋 Check the battery voltage with a multimeter (should be 3.7–4.2V).
• 🕯️ Hold the flashlight to the screen at an angle - if the image is barely noticeable → lighting up.

If you are not sure about the diagnosis, it is better to contact the service center.The average cost of a Redmi Note 7 diagnosis is 500-1000. ₽.

💡

If the smartphone does not respond to any manipulations, but when connected to charging warms up - this is a sign of short circuit.

FAQ: Frequent questions about the reboot of Xiaomi Redmi Note 7 without a screen