How to open the vacuum collector in the robot vacuum cleaner Xiaomi Mi Vacuum Mop: instructions with photos and tips

Xiaomi Mi Vacuum Mop has become a real cleaning assistant for thousands of users, but even such an advanced device has consumables that require regular maintenance. One of the key points is the cleaning of the dust collector, which the manufacturer recommends after each cleaning cycle. However, many owners face difficulties already at the stage of removing the container: unclear latches, fear of breaking plastic parts or simply lack of experience with such equipment.

In this article, we will analyze the step-by-step algorithm for opening the dust collector for all Mi Vacuum Mop modifications (including models with wet cleaning function), point out typical beginner errors and give recommendations for filter care.

Preparation for the extraction of the dust collector: what to do in advance

Before you open the container, make sure the robot vacuum cleaner is completely off. This is not only a safety issue, but also to prevent the engine from accidentally starting during the manipulation of the dust collector. In Xiaomi Mi Vacuum Mop P and 1C models, when power is on, a lock sensor can activate that will not allow the lid to open.

Also prepare the following tools and accessories:

• 🧹 Soft brush for filter cleaning (you can use a toothbrush)
• 🧴 Wet wipes or microfiber cloth
• 🔧 Plastic blade (for models with complex latches)
• 🗑️ Garbage bag or dust collection container

If you are cleaning the dust collector for the first time, take a picture of its original state - this will help to correctly collect all the details back. Pay attention to the position of the sealing gums and filters: their improper installation can lead to loss of suction power or dust entering the engine.

Step-by-step: how to open a dust collector in Xiaomi Mi Vacuum Mop

The process of retrieving the container may vary slightly depending on the model, but the overall scheme is the same for most devices in the series.

1. Step 1. Turn the Xiaomi robot vacuum cleaner upside down. Make sure it lies on a flat surface to avoid falling parts.
2. Step 2. Find a button or a dust collector lever on the top panel. In the Mi Vacuum Mop 2 Pro models, it's a gray plastic tongue with a garbage can icon, in earlier versions, a round ledge.
3. Step 3: Press the button before you click and hold it, while you pull the dust collector cover on you. Don't put too much effort -- if the lid doesn't respond, you haven't fully pressed the lock.
4. Step 4: Once opened, carefully remove the container by the handle, and inside you will see two compartments: the top (for large debris) and the bottom (with the handle). HEPA-filter).

In models with the wet cleaning function (Mi Vacuum Mop P), the dust collector is integrated with the water tank, in which case, first remove the liquid tank, and then open the dust container.

Turn off the robot vacuum cleaner from the network | Turn the device upside down |Prepare cleaning tools |Prepare the cover not locked-->

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when working with a dust collector, which can lead to breakage or reduce the efficiency of cleaning.

Pay special attention HEPA-In Xiaomi Mi Vacuum Mop models, it is designed for 3-6 months of use (depending on the intensity of the cleaning), but many users forget to change it. A clogged filter not only reduces the suction power, but can also cause unpleasant odor. The original filters are labeled W109 or W110 — Check it out when buying a replacement.

💡

If the dust collector does not open despite all efforts, try to slightly press on the side walls of the container - sometimes the latches jam due to the deformation of the plastic when the temperature drops.

Cleaning and maintenance of the dust collector: recommendations from Xiaomi

Once the container is removed, it must be cleaned of accumulated dust and debris, and the manufacturer recommends the following algorithm:

1. Shake the big garbage in the trash can. Don't knock the container on hard surfaces, it can damage the plastic.
2. Use a soft brush to remove dust from hard-to-reach areas, especially around the filter.
3. Wipe the inner walls with a wet wipe. A weak solution of vinegar can be used to disinfect you (1:10 with water).
4. Check the condition of the sealing gum - if it has lost elasticity, replace it.

For models with wet cleaning function (Mi Vacuum Mop 2 Lite), after cleaning the dust collector, be sure to wash the water tank and dry it for at least 24 hours.

The frequency of cleaning depends on the intensity of use:

• 🏡 During daily cleaning, after each cycle
• 📅 When cleaning 2-3 times a week - once every 3-4 days
• 🐾 In homes with animals – daily, regardless of the frequency of cleaning

Replacement of filters and seals: when and how to do it

Filters and sealing elements in Xiaomi Mi Vacuum Mop are consumables that require periodic replacement.

• 🔄 HEPA-filter: every 3-6 months (depending on indoor air pollution)
• 🟢 Sealing gum: once every 12-18 months or when elasticity is lost
• 🔵 Fine cleaning filter (in wet cleaning models): every 2-3 months

To replace the filter, follow the following steps:

1. Remove the dust collector as described above.
2. Press the filter lock (usually a plastic latch on the side) and pull out the old element.
3. Install a new filter, making sure it sits tightly in the slots. The original Xiaomi filters have an arrow pointing to the correct position.
4. Close the dust collector and check that the cover is fixed without backlash.

When buying parts, pay attention to compatibility with your model. For example, filters for Mi Vacuum Mop 1C are not suitable for Mi Vacuum Mop 2 Pro due to different diameters.

• ZNMS13WM — HEPA-filter
• ZNMS15WM – a set of filters for versions with wet cleaning

💡

The use of non-original filters can lead to a decrease in suction power by 30-40% and an increase in engine load.

What to do if the dust collector does not open: diagnosis of problems

If you follow all the instructions, but the dust collector cover still does not respond, the reasons may be as follows:

1. Jamming of the mechanism due to the entry of large debris (hair, thread, animal hair), in this case, try to carefully clean the gaps between the lid and the body with a plastic blade.
2. The plastic deformation when it falls or overheats, and if the robot vacuum cleaner was stored next to the battery or in direct sunlight, the plastic could lose shape, so the solution is to heat the body with a hairdryer (temperature no higher than 50°C) and try to get the latches back to their original position.
3. The lock breaks. In this case, you will need to disassemble the top panel. For Xiaomi Mi Vacuum Mop models, you can order a latch repair kit (article W108).

If the problem is not solved, contact the service center. Self-repair without experience can lead to loss of warranty or damage to electronic components. In official service centers Xiaomi diagnostics of the mechanism of opening the dust collector costs from 500 to 1000 rubles (2026).

⚠️ Attention! Do not use metal tools (screwdrivers, knives) to open a jammed dust collector, which almost always leads to chipping of the plastic and damage to the latches. If the lid doesn't open, try tapping the body slightly with your palm - sometimes it helps to move the jammed elements.

Tips for extending the life of the dust collector

To avoid frequent breakdowns and prolong the life of consumables, follow these recommendations:

• 🧹 Clean the main brushes of the robot vacuum cleaner regularly. Hair and thread buildup increases the load on the engine and dust collector.
• 🚫 Do not use a robot vacuum cleaner to clean up construction debris (sand, plaster, sawdust) and small particles quickly clog filters and reduce their resource.
• 🌡️ Store the device in a dry place at a temperature of 10-35°C. Extreme conditions cause deformation of plastics and seals.
• 🔋 If the robot vacuum cleaner has not been used for more than a week, remove the dust collector and store it separately.

For models with wet cleaning function (Mi Vacuum Mop 2 Pro), after each cleaning, wash the water tank and dry it. Use only distilled or boiled water - this will prevent scaling on the heating elements (if you have them in your model).

If you notice that the robot vacuum cleaner has become worse at sucking dust, but the filters are clean, check the turbine brush. In Xiaomi models, it is located at the bottom and often clogged with hair. Use a special tool (company) or tweezers to clean.

FAQ: answers to frequent questions about the Xiaomi Mi Vacuum Mop