How to properly open the tray for SIM-maps in Xiaomi Redmi 9C: 3 proven methods

Smartphone Xiaomi Redmi 9C — popular model with a convenient two-sim slot, but even experienced users sometimes have difficulty with extracting the tray for the purpose of SIM-Unlike flagship devices, where the mechanism can be more advanced, it's simple, but it requires care. If you're experiencing this procedure for the first time or are afraid of damaging your phone, our instructions will help you avoid errors.

In this article, we will not only discuss the standard method with a paper clip or key, but also alternative methods in case the tool is not available, and also tell you what to do if the tray is jammed, and how not to damage the sealing ring that protects the smartphone from dust. All tips are proven in practice and are suitable for the Redmi 9C (including the versions with NFC).

Where is the tray for SIM-map 9C

At Xiaomi Redmi 9C slot SIM-The map is located on the left side of the case, if you look at the screen face. This is a typical place for most smartphones of the brand, but there are nuances:

• 🔍 The hole for extracting the tray is closer to the upper corner of the phone, approximately on the 1/3 hull height.
• 📏 Size of the slot - nano-SIM (for both cards) + microSD (up to 512 GB) Supports hybrid format: either two SIM, one SIM + memory-card.
• 🛡️ And around the hole is a little rubber ring, which is a dust seal, and it's easy to damage if you push it too hard.

If you can't find the hole to the touch, flash a flashlight - it should shine slightly in a metallic hue. - On some versions of Redmi 9C (Like Redmi. 9C NFC) There's a little badge next to the slot. SIM-maps, but they may not be on the basic models.

⚠️ Note: Do not confuse the hole for SIM-The microphone is lower and has no metal coating inside, and if you try to push it into the microphone, you risk damaging it.

Preparation for extraction: what will be needed

Before you start, prepare everything you need. Ideally, you should have a special key for your own use. SIM-The tray that comes with the phone, but if it's not there, alternatives are good:

If you use a paper clip, straighten it so that the tip is flat and has no burrs. The optimal length of the "tool" is 2-3 cm. Too long an object is inconvenient to hold, and a short one will not reach the mechanism inside.

Also prepare:

• 📱 A flat surface (table, windowsill) so that the phone does not fall.
• 🔦 Good lighting – this will help not miss the hole.
• 🧴 Alcohol wipes (optional) – if the hole is contaminated, wipe it before extraction.

Method 1: Standard extraction by means of a paper clip

This is the most reliable and recommended method. Follow the instructions Step-by-step:

1. Turn off your phone (optional, but recommended for safety).
2. Take the unbended paperclip and insert it into the hole on the left side of the Redmi 9C.
3. Press with moderate force (no need to push hard!) until the characteristic click.
4. The tray will be pushed 2–3 mm – now it can be pulled out with your fingers.

If the tray does not come out the first time:

• 🔄 Check if the stain inside the hole has skewed.
• 📍 Make sure to press strictly perpendicular to the body, not at an angle.
• 🔊 Listen to the click – if it wasn’t there, the mechanism didn’t work.

⚠️ Warning: If a paper clip is stuck inside the hole, do not try to pull it out with tweezers or pliers - this can damage the mechanism. Instead, gently swing the paperclip from side to side until it comes out.

Method 2: Alternative methods (if there is no paper clip)

There are different situations: the key is lost, there is no paper clip at hand, and SIM-You need to change the card immediately, and you can use the tools you can use, but with caution.

Option A: Use of headphones with a 3.5 mm connector

If you have a wired headphone with a metal plug:

1. Cut the wire at a distance of 1-2 cm from the plug.
2. Carefully insert the bare metal tip into the hole.
3. Push until you click.

Option B: Plastic card (bank or discount)

This is a risky approach, but sometimes it works:

1. Take a plastic card and bend it so that a sharp angle is formed.
2. Place the corner between the tray and the body (not the hole!).
3. Carefully press down, simulating the motion of the paperclip.

❗ Warning: This method can scratch the body or damage the seal. Use it only as a last resort!

Method 3: Software extraction (for power users)

Few people know, but some Xiaomi firmware has a hidden feature for software discovery SIM-It doesn't work on all versions. MIUI, But it's worth a try:

1. Open the Phone app.
2. Dial the combination: ##4636##
3. In the menu that appears, select Phone Information.
4. Scroll down and find the push item. SIM-card (if any).

If this is missing, your version of MIUI is not supporting the function, and this method may not work if the phone is locked with a password or fingerprint.

💡

If you change often SIM-card, buy a metal key with a magnet (sold in accessories stores) It's more reliable than a paper clip and does not bend.

What to do if the tray is jammed

Sometimes the tray stops moving because of dust, machine deformation, or factory defects.

• 🧹 Clean the hole: Blow the clip hole with compressed air (such as a canister to clean the keyboard!
• 🔧 Light tapping: Put the phone on a soft surface (like a towel) and tap lightly on the slot area with the back of the pencil.
• 📲 If the tray does not come out even after several attempts, do not make excessive efforts - it can break the mechanism.

If the tray fell inside the case, do not shake the phone - it can damage the internal components.

How to insert it correctly SIM-map

Remove the tray is half the battle, and it's equally important to put it back in the right way to avoid communication problems or damage to contacts.

1. Place the tray on a flat surface with contacts upwards.
2. Put it in. SIM-card(s) so that the cut corner coincides with the shape of the slot.
3. If you use a microSD, insert it into a separate slot (usually signed).
4. Carefully insert the tray back before the click. Don't push too hard!

After installation, check:

• 📶 Is there a network (an antenna icon in the status bar).
• 📞 Can I make a call.
• 📱 Is microSD displayed in storage settings (Settings) → Memory).

⚠️ Attention: If after installation SIM-The phone doesn't see the network, remove the tray and check if the contacts on the map or in the slot are not bent. SIM-card activated by the operator.

FAQ: Frequent questions about SIM-lanyard 9C

💡

If the tray doesn't come out the first time, don't panic -- 90 percent of the time, it's done by cleaning the hole or changing the tool, and the key is, don't put too much effort into not breaking the mechanism.