How to open the cover of the robot vacuum cleaner Xiaomi Vacuum Mop: instructions for all models

Xiaomi Vacuum Mop robot vacuum cleaners (including the popular S5/S6/S7/S10 series and floorwashing models) require periodic maintenance: cleaning filters, replacing brushes or removing stuck debris. However, many users have difficulty opening the top cover of the device. The manufacturer does not always describe this process in official documentation, which leads to the risk of damage to the latches or case.

In this article, you will find step-by-step instructions with visual cues that are relevant to most Xiaomi Mi Robot Vacuum-Mop models, including the Pro/2C/2S/2T and others. We will also take a look at the hidden lid locking mechanisms that are often overlooked even in service centers, and give recommendations for safe removal without using a screwdriver.

If your vacuum cleaner makes unusual sounds, sucks up dust poorly or refuses to turn on, the reason may lie under the top panel. But before you start dismantling, make sure that the warranty period has expired (otherwise, you should contact an authorized Xiaomi service).

1. Preparation for opening the lid: what to do in advance

Before you try to remove the top panel, follow a few steps that will prevent damage to the internal components and simplify the process:

• ⚡ Turn off the vacuum cleaner with a long press on the power button (3-5 seconds). Wait for the indicators to turn off completely.
• 🔋 Remove the battery (if the model allows) to do this, flip the device and move the battery compartment cover to the side, as shown in the photo below.
• 🧹 Clean the case of dust and debris with a soft brush, and dirt particles can get inside when the lid is opened.
• 📸 Take a picture of the location of the wires (if you plan to disassemble them completely) and this will help you get the vacuum cleaner back together properly.

Pay special attention to the fasteners of the side brushes, which must be removed so as not to damage when the lid is opened. In Xiaomi Vacuum-Mop S7/S10 models, the brushes are fixed with plastic latches that are easy to break with excessive effort. If the brushes are not removed by hand, use a plastic blade (for example, a mediator) for careful tweaking.

⚠️ Warning: Do not attempt to open the lid if the vacuum cleaner is in the charging station.Base contacts may be closed when the internal boards are displaced.

Types of mountings of the cover: what are the differences between the models

The top panel design of Xiaomi robot vacuum cleaners varies by series, with the main differences being the locking mechanism and the latch location. Below is a comparison table for popular models:

In the S7/S10, the manufacturer used magnetic locks that make it difficult to open, and you don't need to use force, you need to move it precisely: you move the lid 2 to 3 mm back (to the on button) and then you lift it up. If you hear a click, but the lid doesn't respond, make sure that one of the magnets is caught on the metal plate inside the case.

For models with screws (for example, 2 Pro) you will need a PH0 or PH1 cross screwdriver. The screws are usually hidden under rubber plugs at the bottom of the vacuum cleaner - you can gently tamper with a nail or plastic card. Do not use metal tools to avoid scratching the case.

💡

If you are not sure about the type of attachment of your model, find a sticker with a serial number on the underside of the vacuum cleaner and check it on the official Xiaomi website.

3. Step-by-step instructions: how to open the lid without damage

Consider the universal algorithm that is suitable for most Xiaomi Vacuum-Mop models. If your device belongs to the S7/S10 series, pay attention to the special section below.

1. Find the latches. Turn the vacuum cleaner over and inspect the seam between the top and bottom of the case. Most models have latches: 🔹 On the sides (near the wheels) 🔹 In the front (under IR sensors) 🔹 At the back (near the switching button)

Click the side locks. Put the plastic blade in the seam next to the wheels and press gently up until you hear the click. Repeat on the other side. Don't force -- if the lid doesn't lend itself, then there are still unclicked clips.

Lift the lid. After you snap all the clips, grab the front edge of the lid (on the IR side) and pull up. If the lid only goes up on one side, check the rear latches.

In models with screws (2 Pro/2S), after removing the rubber plugs, unscrew the screws, but not until the end - leave them in plastic bushes. Then gently tuck the lid with a spatula, starting at the corner next to the power button. If the lid is stuck, check if there is any cable left from the battery - it must be disconnected before completely removing the panel.

⚠️ Warning: In the Xiaomi Vacuum-Mop P (European market series) vacuum cleaners, an additional plastic frame fixed to double-sided tape may be under the lid. Don't pull it by force - warm up with a dryer at a minimum temperature (40–50°C) for 1-2 minutes to soften the glue.

4. Features of opening the lid at Xiaomi Vacuum-Mop S7/S10

The S7 and S10 have magnetic latches and a hidden shear mechanism that many users miss, and the standard "click and lift" scheme doesn't work here, but you need a precise sequence of actions:

1. Move the lid back. Place the vacuum cleaner on a flat surface with a power button away from you. Press on the front edge of the lid (from the IR side) and move it 2 to 3 mm back. The characteristic click should come out, that's the magnets disconnected.
2. Raise the front edge. After shifting, gently pull the lid up behind the front. If it doesn't lend itself, check if one of the magnets has caught on the metal plate inside (usually on the right side).
3. Disconnect the plumes. In S7/S10, the lid is connected to the main board with two plumes: one goes to the power button, the other goes to the LED indicator, and carefully snap them with a plastic blade, pulling the black tongues of the connectors.

Another common problem is that the rubber seal around the lid is damaged, which ensures tightness and prevents dust from entering the lid, and if the seal breaks, it can be repaired with a silicone sealant (e.g., Permatex 81160), but it is better to order an original replacement (article for the S7 - MDY-08-01).

If the vacuum cleaner does not turn on after assembly, check:

1. Whether the plumes are connected correctly (especially in S7/S10).
2. Whether the lid is skewed - this can block the power button.
3. Are there any foreign objects (screws, clips) left inside?

6. When you open the lid yourself is not worth it

Not all malfunctions require disassembly of the vacuum cleaner. In some cases, self-intervention may aggravate the problem or deprive you of warranty.

• 💥 The vacuum cleaner fell from a height and is not turned on (possible damage to the board or battery).
• 🔥 There was a smell of burning or smoke from the case (risk of fire of a lithium-ion battery).
• 💧 A liquid has been ingested (even if the vacuum cleaner is working, corrosion can destroy the contacts after a few days).
• 🔄 The vacuum cleaner is turned on but immediately turned off (the BIOS or firmware may malfunction).

It is also not recommended to disassemble the vacuum cleaner yourself if:

• You are not sure about the model of the device (for example, you bought from hand without documentation).
• There are cracks on the body - they can expand when opened.
• You have not had experience in electronics before.

Xiaomi service centers use special devices to open the lid, which evenly distribute the force across all latches. If you are afraid of damaging the device, it is better to entrust the dismantling to professionals - the cost of the work usually does not exceed 1,000-1 500 rubles.

7.What to do after successful opening of the lid

When the lid is finally removed, you'll have access to key components of the vacuum cleaner.

When cleaning the fan, be careful - its blades are made of thin plastic and can break under excessive pressure. Use a soft brush or compressed air (a keyboard cleaner canister) to remove dust.

If you notice that the battery is swelling (the body is deformed, the battery is not flat on the table), do not use the vacuum cleaner until it is replaced. Lithium-ion batteries in this state can ignite. The original batteries for the Xiaomi Vacuum-Mop can be found by the articles:

• S5/S6: BHR4265 (2600 mAh)
• S7/S10: BHR5200 (5200 mAh)

💡

After you've assembled the vacuum cleaner, turn it on and check all the functions: suction, movement, reaction to obstacles. If the vacuum cleaner behaves unusually (for example, it goes around in a circle), then one of the sensors was damaged during the assembly or the train was not connected correctly.

8. Video instructions and additional resources

If the textual instruction seems complicated, we recommend you to read the video parsings. Below are verified sources with visual guides:

• 📺 Official Xiaomi Russia channel (Vacum-Mop S7 service video): link
• 🛠️ Channel "Repair of robot vacuum cleaners" (discussion 2 Pro with comments): link.
• 📖 Forum 4PDA (a theme with photo reports on disassembling different models): link.

On the official website of Xiaomi, the 3D- diagrams of the device for some models are also available.

1. Go to the support page.
2. Enter the serial number of your vacuum cleaner (located on the bottom sticker).
3. In the Documentation section, select Exploded View.

If you are looking for parts, we recommend checked shops:

• Xiaomi Shop Russia (original details)
• AliExpress (budget analogues, check reviews)

⚠️ Warning: When buying batteries and filters on AliExpress, pay attention to the seller's rating (at least 98%) and the number of orders (from 100+).

FAQ: Frequent questions about opening the cover Xiaomi Vacuum-Mop