How to properly open and clean the garbage container in the robot vacuum cleaner Xiaomi 1S: instructions with nuances

Xiaomi Mi Robot Vacuum 1S has become a real cleaning assistant, but even the most advanced equipment requires regular maintenance. One of the key procedures is cleaning the garbage container - if neglected, the vacuum cleaner loses suction power, begins to collect dust worse and even can give out errors. However, many users face difficulties when trying to open the dust collector: latches do not respond, the lid does not remove, and the instructions do not contain detailed illustrations.

In this article, we'll take a step-by-step approach to disassembling a container with all the nuances of the 1S model, show you where the hidden locks are, and explain how to avoid breakdowns, and you'll learn what tools you'll need, how often you need to clean the dust collector, and what to do if the lid is jammed. To illustrate this, we'll give you a unique diagram of all the latches -- that's not even in the official manual.

Preparation for disassembly: tools and precautions

Before you open the container, make sure the vacuum cleaner is off and disconnected from the charging station, which will prevent accidental start-up during cleaning, and prepare the following tools and materials:

• 🔧 Plastic blade or mediator - for careful grazing of latches (metallic objects can scratch the body).
• 🧴 Soft fabric or wipes – for cleaning internal surfaces.
• 🧹 Small brush (such as toothbrush) – to remove dust from hard-to-reach areas.
• 🔍 Lights – will help to see the hidden fixtures.

Pay special attention to the type of garbage in the container, and if the vacuum cleaner collects a lot of animal hair or long hair, they can wrap around the filter or get stuck in the latch mechanism, in which case additional cleaning with tweezers will be required.

⚠️ Warning: Do not use pressure water or aggressive detergents to clean the container; the plastic of the housing may become deformed; the electronics inside the vacuum cleaner may fail; for wet cleaning, slightly moistened fabric is sufficient.

Where is the garbage container in Xiaomi 1S and how to remove it

In the Mi Robot Vacuum 1S, the dust collector is located at the back of the body, under a removable lid, to extract it:

1. Put the vacuum cleaner on a flat surface with a lid upwards (it is more convenient to get the container).
2. Press the release button of the lid (it is on the right if you look at the vacuum cleaner from behind).
3. Pull the lid on yourself - it should open with a characteristic click.
4. Carefully remove the container by pulling it up and a little on yourself.

If the lid doesn't open the first time, don't put too much effort into it, maybe the vacuum cleaner was not properly assembled after the previous cleaning, or the debris is blocking the mechanism.

Check if the garbage is clamped in the gaps between the lid and the case |

Try to sway the lid slightly left-right |

Light the flashlight on the mounting site - perhaps the latch is not fully fixed |

If nothing helps, contact the service center (a self-power opening can break plastic parts)-->

Step-by-step: how to open a garbage container

Now, to the container itself, the design has two main parts:

1. The top cover is a removable part with a filter.
2. The bottom compartment is the main garbage storage.

To open the container:

1. Put it on the table with a garbage hole up.
2. Press the two side latches (they are located on the sides of the cover, closer to the front).
3. Pull the lid on and up - it should separate from the base.
4. Remove the filter (it is attached inside the lid) and clean it from dust.

The important thing is that in the 1S, the latches have a dual locking mechanism, which means you have to press them simultaneously and with equal force, otherwise the lid won't open. If you can't, try this:

• 🔹 Press first on the right latch, then on the left, holding the first.
• 🔹 Use a plastic spatula to gently tuck the lid on the side (but don't overdo it - the plastic is fragile!).
• 🔹 Check if the garbage is clogged into the latch slots - this is a common cause of jamming.

Cleaning the filter and sealing gum: nuances for Xiaomi 1S

The HEPA filter in the Mi Robot Vacuum 1S is a consumable, but if properly maintained, it will last longer.

1. Remove large debris by hand or vacuum cleaner.
2. Wash the filter under warm water (not higher than 40 ° C) without detergents.
3. Shake gently to remove excess water, and leave to dry for 24 hours in a well-ventilated place.

Do not dry the filter with a hair dryer or on a battery, which will lead to deformation of the material and loss of filter properties.

The sealing gum on the lid of the container loses its elasticity over time, to extend its lifespan:

• 🧴 After each cleaning, wipe the rubber band with a dry cloth.
• 🛢️ Once a month, apply silicone lubricant to it (without alcohol!).
• ❌ Avoid getting oils, gasoline or solvents on the gum.

💡

If the filter is getting worse after cleaning, try vacuuming it carefully on the back (where there is no plastic frame) to remove the deep dust.

Common mistakes when opening a container and how to avoid them

Many users make the same mistakes that lead to breakdowns or deterioration of the vacuum cleaner, the most common of which are:

• 🔨 Using metal tools to open the latches, it scratches the plastic, it can break the locks. Use only plastic blades or mediators.
• 💦 Washing a container in a dishwasher, high temperature and aggressive detergents destroy plastic and seals.
• 🔄 Incorrect assembly after cleaning. If the filter or cover is curved, the vacuum cleaner will give an error "Check the dust collector".
• ⏳ Ignoring regular cleaning: The accumulation of dust in the container increases the load on the engine and reduces the life of the vacuum cleaner.

Another common problem is that the latch mechanism jams the debris, and if you notice that the lid is hard to open, don't pull it.

1. Turn the container over and gently tap on it so that the debris falls out.
2. Use tweezers to extract hair or threads from the grooves.
3. If the latch still does not work, take a picture of the problem area and contact the service with the 1S model.

💡

The HEPA filter in Xiaomi 1S cannot be washed in the washing machine or boiled, it destroys its structure.

When the container or parts of it need to be replaced

Even with careful care, some parts of the container wear out over time, and replacements require:

• 🔄 Filter HEPA — every 6-12 months (depending on the intensity of use).
• 🛠️ Sealing gum – if it has lost elasticity or broken.
• 🗑️ The container itself - in case of cracks or deformation (for example, if it stepped on it).

Original spare parts for Xiaomi Mi Robot Vacuum 1S can be ordered by the following articles:

When buying parts, pay attention to compatibility with the 1S model - parts from other versions (such as the 1C or Pro) may not work.

⚠️ Warning: If the vacuum cleaner becomes worse after replacing the filter, make sure you have installed it on the correct side (the original filter has a label "TOP"). Also check if the container lid is tightly closed – even a small gap reduces the efficiency of cleaning.

Additional Tips for Cleaning Xiaomi 1S

To make your robot vacuum cleaner last longer, follow these guidelines:

• 📅 Clean the container after each cleaning, especially if there are animals in the house.
• 🔋 Do not leave the vacuum cleaner on charging for more than 24 hours – this reduces the battery life.
• 🧲 Clean the sensors and camera (front) of dust regularly.
• 🚫 Do not use a vacuum cleaner to clean liquids - this will lead to a short circuit.

If you notice that the vacuum cleaner is more likely to give out errors (for example, "Error 10" - a problem with the wheel or "Error 5" - a clogged fan), first check the container. In 70% of cases, the cause is a crowded dust collector or a clogged filter.

FAQ: Frequent questions about the Xiaomi 1S container