Xiaomi DVRs are among the most popular gadgets for motorists, thanks to a combination of price, quality and compact size, but sooner or later the owner faces the task of removing the device from the glass: Whether it's selling a car, changing the recorder to a new model, or simply having to move it to another vehicle, the problem is that the two-way tape that attaches to models like Xiaomi. 70Mai Pro, Mi Car Recorder or Xiaomi Dash Cam 2, eventually “stick” to the glass, turning into a real headache.
In this article, we will discuss 5 working ways to unplug the Xiaomi recorder without damaging the glass and body of the device, and how to remove glue residues and avoid typical errors. We will focus on the thermal method, the most effective but neat, and alternative options for those who do not have a hairdryer at hand. If you are afraid of damaging the windshield or leaving traces, here you will find step-by-step instructions tailored to the specifics of Xiaomi mounts.
Why is Xiaomi Registrar So Hard to Unplug?
All Xiaomi DVRs (with rare exceptions) are attached to glass using double-sided tape. 3M VHB This material is designed to be permanently mounted, to withstand vibrations, temperature changes and humidity, but it also creates an almost inseparable connection to the surface. Over time, under the influence of sunlight and heat, the glue polymerizes, penetrating into the microcracks of glass.
Here are the key factors complicating the process:
- 🔥 Temperature: In summer, Scotch "sinters" with the surface, in winter - becomes fragile, but no less durable.
- ⏳ Duration of use: The longer the recorder hangs on the glass, the stronger the clutch (after 3-6 months it becomes difficult to remove it).
- 🚗 Vibrations and bumps: Constant shaking in the car seals the glue, making it more viscous.
- 🧴 Glass cleaning quality: If the surface has been treated with alcohol or degreasing before installation, scotch is held tighter.
Xiaomi models 70Mai Midrive D06 Xiaomi Mi Car Recorder 1S They use a particularly strong glue, and they often find that when you try to tear off the recorder, not only the tape, but also the pieces of plastic mounting, and this is not a defect, but a design feature: the manufacturer expects to have a long-term installation.
Preparation for the removal: what will be needed?
Before you start peeling off, prepare tools and materials, which depend on the method chosen, but there is a universal set:
| Tool/material | Appointment | Where to find it. |
|---|---|---|
| Plastic card or mediator | For scotching without scratching | Home set, stationery store |
| Thread or fishing line | Cutting the glue layer | Pharmacy, hardware store |
| Hair dryer (construction or household) | Heating the glue to soften | Home hair dryer or rent |
| Isopropyl alcohol (70%+) glass-cleaner | Removal of glue residue | Pharmacy, auto shop |
| Microfiber wipe | Cleaning glass after the procedure | Optics or electronics store |
⚠️ Warning: Do not use metal objects (knives, screwdrivers) - they scratch the glass and can damage the recorder matrix. Also avoid acetone and solvents based on gasoline: they spoil the tinting and plastic parts of the cabin.
If you have a spare double-sided tape for the recorder, prepare it in advance. After removing the device, the glass will need to be immediately cleaned and the new mount sealed so that dust does not get on the glue surface.
Method 1: Thermal method (the most efficient)
Heating is the best option for most Xiaomi registrars, as glue 3M VHB loses adhesion at a temperature higher +60°C. Your task is to evenly warm up the mounting site without overheating the device itself.
Step-by-step:
- Turn on the dryer at medium power (temperature) ~60–80°C) Keep the building dryer on minimum mode!
- Keep the hair dryer at a distance of 10-15 cm from the glass, evenly leading them around the perimeter of the mounting for 2-3 minutes.
- Try to gently tuck the recorder with a plastic card. If you do not respond, warm up for another 1-2 minutes.
- Once the tape starts to move away, slowly pull the recorder parallel to the glass without pulling up.
🔹 Benefits of the method: Minimum risk of glass damage, suitable for all Xiaomi models.
🔸 Disadvantages: requires a hair dryer, with careless heating, you can melt the plastic fastening.
Check the temperature of the hair dryer (should be at least 60).°C)|Try to warm up longer (up to 5 minutes)|Use the thread to trim the glue|Start at the mounting angle where the scotch is thinner-->
What happens if the registrar overheats?
Method 2: Thread or fishing line
This is a good way to do this if you don't have a hair dryer or if you're afraid of damaging the recorder with heat, and the idea is to cut through the adhesive layer with a thin thread, gradually separating the tape from the glass.
How to proceed:
- Take a strong dental floss (preferably waxed) or a fishing line 0.2-0.3 mm thick.
- Carefully push the thread under the angle of the recorder attachment, trying to wind it between the tape and glass.
- With a forward-back-up movement, start cutting through the glue. Hold the thread at a 30-45 angle.° glassy.
- As you move, poke the recorder with a plastic card so that the thread does not clamp.
⚠️ Warning: Do not use a metal string or wire - they scratch the glass! Also avoid sudden movements: the thread can jump and scratch the plastic of the recorder.
This method requires patience: it can take 10 to 15 minutes to cut through the entire perimeter, but it is safe to tint and does not require heating. 70Mai Dash Cam A500S.
💡
If the thread slides and doesn't cut the glue, moisten it in isopropyl alcohol, which will help dissolve the top layer of the adhesive and make the process easier.
Method 3: Plastic cards and mediators
If you don't have a hair dryer or thread on hand, you can try unzing the recorder with plastic tools, a method that is less effective for "old" glue, but is suitable for relatively new installations (up to 6 months).
Algorithm of action:
- 📱 Take an unnecessary plastic card (bank, discount) or guitar mediator.
- 🔍 Start with the angle of attachment: gently tuck the scotch with a card, trying to separate it from the glass.
- 🔄 Gradually move along the entire perimeter, lifting the scotch in small areas.
- 🧴 If the glue does not lend itself, drop a few drops of isopropyl alcohol under the card and wait 1-2 minutes.
🔹 Pros: No special tools required, minimal risk of damage.
🔸 Cons: low efficiency for "stiff" scotch, high risk of leaving traces of glue.
For models with magnetic mounting (for example, Xiaomi) 70Mai Omni) this method is combined with a blade: first remove the magnetic stand, then clean the glue residue from the glass.
Method 4: Special means for glue removal
If mechanical methods don't work, chemical solvents will come to the rescue, and the main thing is to choose a tool that does not damage the glass and plastic of the recorder.
Top.-3 testable:
| Remedy. | How to use | Pluses | Cons |
|---|---|---|---|
| Isopropyl alcohol (70%+) | Apply on a napkin, apply to glue for 5-10 minutes | Safe for glass, evaporates without a trace | It acts slowly on the old glue. |
| WD-40 | Spray on glue, wait 10 minutes, scrape the map | Well dissolves adhesive, available in auto shops | Leaves greasy traces, you need to wash off |
| Special cleaner 3M (for example, 3M Adhesive Remover) | Apply on glue, wait 3-5 minutes, remove with a napkin | Maximum efficiency for scotch 3M | Expensive, not sold in all stores |
⚠️ Warning: Never use white spirits, gasoline or acetone - they corrode the tinting and can damage the anti-reflective coating of glass. Also avoid products with abrasive particles (for example, pastes). GOI).
A critical nuance: if the recorder was attached to the glass heated, the chemicals can penetrate the microcracks and damage the heating threads, in which case it is better to use mechanical methods (strand or heat).
Method 5: Professional tools (for complex cases)
If the logger's been hanging on glass for more than a year or previous methods have failed, you'll have to use specialized tools, and they're sold in auto stores or on AliExpress.
What can help:
- 🔧 Plastic blade glass scraper: allows scotch to be tampered with without the risk of scratching the surface. Suitable for wide-mounted models (Xiaomi) 70Mai Dash Cam A800).
- 🧲 Sticker removal kit: includes plastic shoulder blades and solvent. 3M tesa.
- 🔥 Infrared heater: an alternative to a hair dryer for uniform heating (used in car service stations).
- 🧴 Gel to remove glue: applied for 10-15 minutes, then the glue is removed effortlessly (for example, Permatex Sticker Remover).
If you are not sure of your abilities, it is better to contact a car service or an alarm shop. The cost of the service usually does not exceed 500-1000 rubles, but you are guaranteed to avoid damage to the glass or the recorder.
💡
For Xiaomi models with a battery (for example, Mi Car Recorder) 1S) Do not use methods that require prolonged heating or aggressive solvents – this can disable the battery.
How to remove the glue after removing the registrar?
Even if you've managed to unstick the recorder, there's almost always glue on the glass, and you have to remove it, otherwise the new mount will hold worse and dust will gather under the tape.
Step-by-step cleaning:
- Moisten the microfiber wipe in isopropyl alcohol or a special cleaner (for example, 3M Citrus Base Cleaner).
- Wipe the remains of the glue in circular movements, without pressing hard on the glass.
- For old tracks, use a plastic scraper, holding it at an angle of 15-20°.
- After cleaning, wipe the glass with a degreasing agent (for example, alcohol). + water 1:1 and let it dry.
- If you plan to glue the recorder back, stick a new tape no earlier than 10-15 minutes after cleaning.
⚠️ Warning: Do not use sandpaper or metal sponges - they scratch the glass, creating glare when driving at night. Also avoid paper towels: they leave a pile, which will then be visible under new tape.
Use the same alcohol or plastic cleaner (e.g. Sonax Plastic Cleaner) to remove the adhesive from the plastic recorder mount. Don't rub too hard on glossy surfaces (Xiaomi) 70Mai Pro) matte spots may remain.
Common Mistakes and How to Avoid Them
Many Xiaomi registrar owners make the same mistakes that damage machinery or glass.
- 🔨 To tear off the recorder with a jerk is guaranteed to leave traces of glue and can damage the mount. Always move the device parallel to the glass.
- 🔥 Overheat one place with a hair dryer, the glass can burst from a local temperature difference!
- 🧴 Use the first solvent you find, acetone or gasoline, which corrodes tinting and plastic.
- 📱 Glue new tape on dirty glass - dust and fat will reduce adhesion, and the recorder will fall off in a week.
- ❄️ Try to unstick the recorder in the cold - the glue becomes brittle and can break off along with pieces of glass.
If you have white stains on the glass after removing the recorder, it means that the glue is not completely removed. Rub the surface with alcohol again and use a plastic scraper. To eliminate the yellow stains (adhesive residues), an ammonia glass cleaner (for example, Invisible Glass) will help.
If the recorder mount breaks when you remove it, do not try to repair it with superglue - this is a temporary solution. It is better to order the original part on AliExpress or at the Xiaomi service center (the mounting articles are usually indicated in the instructions).