How to stick a protective glass on Xiaomi Redmi 9 without bubbles: video instructions and life hacks

The protective glass on Xiaomi Redmi 9 is not just an accessory, but a necessary measure to keep the screen from scratches, chips and cracks. Even a slight fall from a height of 50 cm can turn into expensive repairs if the display is not protected. However, many users face the problem: when installed independently, bubbles, dust or it shifts, negating all efforts.

This article will help avoid common mistakes, and we will analyze the step-by-step process of stickering, taking into account the features of the Redmi 9 model (including variants with the following features): 2D.5D and 3D We'll show you a video with a visual demonstration, and we'll also reveal the secrets of professionals, from the selection of adhesive base to the final polishing. We'll focus on the unique shape of the Redmi 9 screen with rounded edges, which requires a specific approach when installing. 3D-glass-glass.

Why is the safety glass on Redmi 9 a must-have accessory?

The screen Xiaomi Redmi 9 is made using IPS LCD technology with a resolution of 2340×1080 and a diagonal of 6.53 inches. Despite the manufacturer's stated strength (hot pressing and hardened coating), real tests show that the display is vulnerable to:

• 🔹 Scratches from keys / coins in the pocket (Mohs hardness) ~5-6 against 7 quartz-sand).
• 🔹 Skolam when falling on asphalt or tiles (even from a height of 1 meter).
• 🔹 Microcracks from prolonged pressure (for example, if the phone is lying down screen).
• 🔹 Loss of sensor sensitivity due to abrasion of the oleophobic coating.

Statistics of Xiaomi service centers in Russia show that 38% redmi repairs 9 This is because of the damage to the screen, and the cost of replacing the display module in the 2026 yearly 8 before 15 And it's a thousand rubles, which is comparable to the price of a new smartphone in the budget segment (9H The Mohs scale reduces the risk of damage to 80-90%, and it costs to install it in 300-800 ruble.

⚠️ Note: Cheap glass without certification (for example, with AliExpress at a price below 200 rubles) often have 4H-5H Hardness and no impact protection. Check the labeling on the package!

What kind of glass to choose for Xiaomi Redmi 9?

There are 4 types of glass on the market, differing in shape, material and installation method.

For Redmi 9, the best choice is 2.5D or 3D glass with parameters:

• 🎯 Accuracy of cutouts: Check compatibility with front camera, speaker and sensors.

Preparing the phone for the sticker: step-by-step instructions

Successful installation depends on 70 percent surface preparation, neglecting this step leads to bubbles, detachment or dust. For the Redmi 9, with its textured back and protruding camera, the process is nuanced.

Remove old glass/film (if any)|Wash the screen with an alcohol napkin |Blow dust out of the speaker and connectors |Disable the phone during installation |Prepare a lit clean space-->

Step 1: Remove the old coating. If there is already a film or glass on the screen, remove it with a plastic card or mediator, putting it on the corner. For glue-based glasses, use a hair dryer (heat the surface to 40-50°C to soften the glue). For Redmi 9, it is important not to damage the oleophobic coating of the screen - do not use metal objects!

Step 2: Screen cleaning: Use a microfiber wipe (as for glasses) and 70% isopropyl alcohol (or a special screen cleaner).

• 🔍 Corners near the front camera (there accumulates the most dirt).
• 🔍 Areas around speaker and proximity sensor.
• 🔍 Rounded edges (for 3D-glass-glass).

⚠️ Warning: Don't use household alcohol or wet wipes - they leave divorces! Also avoid paper towels: their fibers cling to the screen.

Step 3: Dust removal. After cleaning, take a tape (a 1.5-2 cm wide tape) and gently paste the entire screen to lift the microparticles. For Redmi 9, it's critical to remove dust from the notch under the camera -- use a toothpick wrapped in microfiber.

💡

If there is a lot of dust in the room, stick the glass in the bathroom after a hot shower - the steam will settle on the particles, and they will not fly in the air.

How to put a protective glass on Redmi 9: video and text instructions

The installation process is different 2D/2.5D and 3D-Below is a universal instruction with Redmi features. 9 (For example, a protruding main camera that prevents the phone from being placed downwards).

Video instructions (we recommend you to watch before starting):

🎥 Example of video insertion (replace with real YouTube video):

<iframe width="560" height="315" src="https://www.youtube.com/embed/XXX" title="How to paste glass on Redmi 9" frameborder="0" allowfullscreen></iframe>

Textual instruction for 2.5D-glass:

1. Unpack the glass and remove the protective film only from the glue side (do not touch the outside!).
2. Line the glass across the camera cutouts and speaker. For Redmi 9, use center stickers (come with the kit) or stick tape to the top and bottom of the screen to help lock in position.
3. Carefully lower the glass from the middle of the screen to the edges, avoiding displacement. Don't push hard, the glue will spread itself.
4. Remove the bubbles with a plastic card or a special scraper, moving from the center to the edges.
5. Check the sensitivity of the sensor in the Settings menu → Display → Touch test.

Features for 3D-glass:

• 🔹 Heat the glass with a hair dryer (30–40)°C) before installation, this will make it more flexible for bending.
• 🔹 Use it. UV-glue (if it comes with a kit) and irradiate the glass with a UV lamp for 10-15 seconds to fix.
• 🔹 For Redmi 9 with case, remove the case before installation - it can interfere with the correct fit at the edges.

Common Mistakes and How to Avoid Them

Even with careful preparation, Redmi users 9 They often face problems.-5 mistakes and their solutions:

1. Bubbles around the edges. Reason: Dust or insufficient pressure when you install it. Solution: Warm the bubble with a hairdryer and squeeze it with a map. If it doesn't work, glue the glass.
2. The glass doesn't stick to the corners (steps away). Reason: For Redmi 9, it's typical because of the rounded edges. 3D-glass UV-Solution: Put a drop of glue at the outgoing corners and irradiate it with a UV lamp.
3. Bloated bubbles in the center. Cause: Air got under the glass because of the wrong lowering. Solution: Carefully puncture the bubble with a needle and smooth it out with a map.
4. Poor sensor sensitivity. Cause: Glass too thick (>0.33 mm) or poor-quality glue. Solution: Check the settings in Settings → Additional → Screen sensitivity.
5. The glass cracked when installed. Reason: pressure on the corners or the phone fell. Solution: Replacement only. For Redmi 9, buy some spare glass (often 2 pieces come with the package).

💡

Redmi 9 is critical to use glass with a cutout for the infrared port (located to the right of the camera), if the glass closes the port, the remote control functions will not work.

How to take care of the protective glass so that it lasts longer?

The average glass life is 6-12 months, but with proper care, it can be extended to 1.5-2 years. For the Redmi 9 with its oleophobic screen coating, it is especially important:

• 🧴 Cleaning: Use only microfiber and distilled water. Alcohol wipes destroy oleophobic layer.
• 📵 Storage: Do not place your phone screen down on abrasive surfaces (sand, concrete).
• 🔥 Temperature: Avoid overheating (e.g., leaving in the sun in your car) – the glue may melt.
• 💧 Humidity: After showering or raining, dry your phone before using (moisture gets under the glass through micro gaps).

If the oleophobic coating of glass has worn (the screen has become greasy, the fingers slide worse), it can be restored:

1. Buy an oleophobic coating in a spray (such as NanoMagic).
2. Clean the glass with alcohol and apply the spray in a thin layer.
3. Polish with microfiber in 5 minutes.

⚠️ Note: Do not use toothpaste or soda solution to polish glass - they scratch the surface and spoil the optical properties!

Frequently Asked Questions (FAQ)