Wherever SIM-Map in Xiaomi phone: slot search, extraction and problem solving

You just bought a new Xiaomi smartphone and can’t find where the slot is hidden. SIM-Or do you have to change the operator, but the tray doesn't want to move? This is a problem that many brand owners know -- especially if you're looking at models that have a different layout. SIM It was always in sight, modern smartphones hide it under the lid, in the side end or even under the battery (in rare cases).

In this article, we will find out how to find SIM-map in the Xiaomi phone - from budget Redmi to flagship Mi and POCO. You'll know:

• 🔍 Where exactly is the slot in your model (with a photo and description)
• 🔧 How to remove the tray without the risk of damaging the phone
• ⚠️ What to do if the card is stuck or the slot does not open
• 📱 Features of hybrid slots (SIM + microSD and how to use them

We will also talk about little-known nuances, for example, why in some Xiaomi models the slot for the second SIM can be blocked software, and how to fix it.

1 Where is the slot for SIM-Maps in Xiaomi: typical places

Xiaomi manufacturer uses several standard slot locations SIM-This is the most common map, depending on the model and year of release:

• 📱 The side end (left or right) is the most frequent location. Usually the slot is next to the volume or power buttons. Example: Redmi Note 10 Pro, POCO X3 Pro.
• 🔋 Under the removable cover, typical of older models (until 2018) or budget lines. 4A or Redmi 5A.
• 🔌 The upper end is less common, but is found in some flagships, such as the Mi 11 Ultra.
• 🛠️ Under the battery – extremely rare, only in very old models (for example, Redmi). 1S).

To determine exactly where the slot is in your model, use the table below or check the official documentation on the Xiaomi website (enter the model name in the search).

If your model is not in the table, pay attention to the visual signs:

• 🕳️ The little hole next to the buttons is the connector for SIM-extractor).
• 🔄 The plastic cover on the back is most likely the slot underneath it (gently tuck your nail or mediator in).
• 📏 Seam on the body - in some models (for example, POCO M4 Pro) slot hidden under decorative insert.

2. How to remove the tray for SIM-maps: step-by-step instructions

Once you've found the slot, you have to remove the tray correctly, and there are many mistakes that people make, like trying to pull it out with a nail or a needle, which causes the machine to break down.

Turn off your phone (recommended, but not required)

Find a hole for the extractor (usually next to the slot)

Prepare a paper clip, pin or special key from the kit

Put your phone on a flat surface so as not to drop the tray.-->

Step 1. Take this. SIM-an extractor (complete with your phone) or an unbended paperclip. If you don't have anything at hand, you can use a thin pin, but be careful not to punctur the sealing ring!

Step 2. Put the tool in the hole next to the slot to the end. Push it with moderate force, a slight click should be heard, and the tray will move out a little.

Step 3: Pull the tray carefully over yourself. Don't put too much effort into it -- if it doesn't go, check if it's locked with a lid or a cover.

Step 4: Place the nano-SIM in the tray (the card should fit tightly, without backlash). Make sure that the cut at the corner of the map matches the shape of the socket.

Step 5: Put the tray back into the slot before you click. Make sure it sits flat - skewings can lead to poor contact.

💡

If the tray is not fixed after insertion, try to slightly press your finger on it or wrap it. SIM-card with thin tape (for example, tape) so that it fits tightly.

⚠️ Warning: Never use sharp objects (knives, scissors, toothpicks) to remove the tray, which can damage the O-ring, causing dust and moisture to enter the phone.

3. What to do if SIM-The card is stuck or the slot does not open.

Sometimes the tray SIM-The reasons for this are things like factory failure, or getting trash in the machine:

• 🔄 Try again with another tool. Maybe the paperclip is too thin or bent. Try using a key from the kit or a thicker pin.
• 🔦 Light a flashlight into the slot. Sometimes the garbage (dust, fibers of fabric) blocks the mechanism.
• 🔧 Check if the tray is clamped with a case. Take off the case and try again.
• 📱 Reboot your phone. In rare cases, the slot may be blocked due to a software failure (especially after an update). MIUI).

If the tray is partially pushed out, but not fully removed, do not pull it by force - so you can tear the contacts.

1. Carefully swing the tray left and right, at the same time pulling it on yourself.
2. If it doesn't help, take tweezers and gently tuck the tray around the edges.
3. In extreme cases, contact the service center - self-repair can lead to loss of warranty.

⚠️ Warning: If after removing the tray you notice that the contacts are bent or oxidized, do not insert SIM-This could damage the communications module, and you'd better go to the workshop right away.

4. Hybrid Slots: How to Use SIM + MicroSD

Many Xiaomi models (especially the budget Redmi and POCO) have hybrid slots where you can install either two nano-SIMs or one nano-SIM + microSD. This is convenient, but often causes confusion.

Here’s what a typical hybrid tray looks like (as shown in the Redmi Note 11):

• 📱 Slot 1 – Always for Nano-SIM (Main Card).
• 📱 Slot 2 is either a second nano-SIM or a microSD (but not simultaneously!).

To install a memory card instead of the second SIM:

1. Remove the tray (as described above).
2. Take the second one away. SIM-map (if it has been installed).
3. Place the microSD in slot 2 (usually marked or of a different size).
4. Put the tray back in before the click.

⚠️ In hybrid slots, you can't use two at the same time. SIM-microSD card and microSD if you need two SIM and the memory card, you will have to choose: SIM, expansion of memory.

Also note that in some models (such as the Redmi 9A), the microSD slot only supports cards up to 512GB. Check the limitations for your model in the official specs.

💡

A hybrid slot is a compromise between the two. SIM-I'll use a card and a memory extension if you need both. SIM and microSD, consider models with a separate memory card slot (e.g., a microSD, POCO M5s).

5. Software problems: why the phone can't see SIM-map

Sometimes slot SIM-The card is good, but the phone still can't see the network:

• 🔄 Failure MIUI. Restart your phone or reset your network settings: Settings → SIM-maps and mobile networks → Resetting network settings.
• 📶 Incorrect network mode. Make sure the correct standard is selected (4G/5G): Settings → SIM-maps and mobile networks → [Yours. SIM] → Preferred type of network.
• 🔒 Lockdown IMEI. If you bought your phone with your hands, check if it's locked under another operator. IMEI You can do it by command *#06#.
• 🛠️ Software Update: Outdated firmware can cause communication problems. Check for updates: Settings → The phone. → Updating the system.

If the phone says "No service" or"SIM-No map found, try the following steps:

1. Remove and insert. SIM-Re-installation (sometimes just re-installation helps).
2. Check to see if the flight mode is activated.
3. Make sure that SIM-The card is activated by the operator (especially if it is new).
4. If nothing helps, try inserting. SIM-card to another phone, so you know if the problem is in the card or in the device.

In Xiaomi models with support 5G (for example, Xiaomi 12T Or the Redmi Note 11 Pro.+ 5G) Sometimes there is a conflict between the slots. SIM-If one of the cards does not support 5G. In this case, try to change the cards or turn off. 5G customized.

6. Frequent errors in working with SIM-map

Even experienced users sometimes make mistakes that lead to problems with the user. SIM-Here are the most common ones:

• ❌ Using micro-SIM instead of nano-SIM. New Xiaomi models only use nano-SIM. If you have an old-style card, cut it with a special template or contact the operator.
• ❌ Installation SIM-The tray usually has a diagram of how to insert the card correctly. If you mix the sides, the phone won't see it.
• ❌ Ignoring updates MIUI. Some firmware has bugs that make your phone stop seeing the network. Always install the latest updates.
• ❌ Self-repair slots. If the tray breaks, don't try to fix it at home - it can damage the motherboard.

Another common mistake is to use non-original cases that press the slot, if after installing the case, the phone stopped seeing. SIM-Take it off and check if the tray is deformed.

⚠️ Note: If you use two of these SIM-cards and one of them stopped working, check if the function is not enabled SIM-data cards” (Settings → SIM-maps and mobile networks → Priority SIM-Sometimes the phone automatically turns off the second one. SIM, If it is not used for the Internet.

7.How to check if your Xiaomi supports two SIM-map

Not all Xiaomi models support two physical models. SIM-For example, in some flagships (for example, Xiaomi 13 Pro) slot only one, and the second one. SIM — eSIM to find out the capabilities of your phone:

• 📄 See official specifications on mi.com (enter the model in search).
• 🔍 If you check the tray, if it has two slots under nano-SIM, it means that two physical cards are supported.
• 📱 Go to settings: Settings → SIM-maps and mobile networks, if you have the choice"SIM 1" and"SIM 2′′ means the phone supports Dual SIM.

If your model supports eSIM (e.g. Xiaomi 12S Ultra), you can use one physical SIM and one virtual SIM to activate the eSIM:

1. Get it. QR-activation code from your operator.
2. Go to Settings. → SIM-maps and mobile networks → Add a mobile network.
3. Scan it. QR-code or enter data manually.

⚠️ Not all operators in Russia support eSIM. Before buying a phone with this feature, check with your provider whether the service is available.

FAQ: Answers to Frequent Questions