How to wash the vacuum cleaner Xiaomi G20: full instructions for care

Regular cleaning of the battery vacuum cleaner is the key to its long service and high efficiency. Owners of the Xiaomi Mi Vacuum Cleaner G20 model often wonder whether it is possible to wash the main components and how to do it correctly so as not to damage the electronics. Despite its compactness and lightness, this device requires careful attention to the filtration system, which is quickly clogged with fine dust.

In this article, we will discuss the process of service Step-by-step, paying special attention to the process. HEPA-The filter and the garbage container, the improper maintenance can cause the suction power to drop and the engine to overheat, and the simple hygiene of the device will allow you to use the device for years without losing performance.

Preparation for cleaning and safety measures

Before you start any manipulation of the device, you need to completely disconnect it from the network and remove the battery. Safety is the number one priority, since water entering the contacts can cause a short circuit. Even if you plan to wash only plastic parts, the risk of accidental wetting of internal components should be eliminated.

Remove the main tube and floor nozzle to access the dust collector. It is recommended to clean over the sink or in the bathroom where there is a water drain. Prepare a soft brush, dry rags and a container with warm water in advance.

⚠️ Attention: It is strictly forbidden to immerse the main unit with the engine, the battery compartment or the charger in water.

Make sure you have free space to dry parts. It takes 12 to 24 hours to dry all washed elements completely, so plan ahead so you don't have a working vacuum cleaner at the right time.

Cleaning of the dust collection container

The G20's main reservoir is made of durable plastic that is easy to clean. Press the lock button and remove the cyclone block from the body. To devastate, press the lower lid opener above the trash can. Try to do this carefully so that the dust cloud does not rise into the air.

Wash the inside of the container under a stream of warm water. If there is sticky dirt left on the walls, you can use a soft detergent, but it must be thoroughly washed away. Do not use abrasive sponges or brushes with hard bristles, as they can leave scratches on the transparent plastic.

💡

Use an old toothbrush to remove dust from hard-to-reach corners of the cyclone block where water flow does not penetrate.

After washing, shake the tank thoroughly, removing any remaining water. Check the sealing gums for debris that may be adhering to the system. A clean container ensures the correct airflow inside the cyclone.

Washing and maintenance HEPA-filter

Filtering system Xiaomi G20 consists of HEPA-This is the most important element that traps microscopic dust particles and allergens, and a clogged filter is the main reason for the decrease in suction power, so you need to pay maximum attention to its condition.

Remove the filter from the compartment by pulling the tongue. Tap it carefully on the edge of the sink to remove the main dry dust. Then rinse the filter element under the tap. Direct the jet of water against the direction of air movement (from the outside clean side inwards or just spill through the pores) to wash the contaminants.

Do not use hot water or chemical cleaning products to wash the filter, as they can damage the fibers of the material. Once washed, the filter will look wet and heavy. It cannot be squeezed or twisted, otherwise the structure of the filter layer will be disrupted.

⚠️ Attention: Installation of wet HEPA-filter back into the vacuum cleaner will lead to water entering the engine and the device failure.

Care for the main brush and nozzles

The electric brush on the floor is often tangled with animal hair, threads and hair. To clean it, flip the nozzle and find the clippers. The G20 has a convenient access system that allows you to quickly remove the protective panel without using tools.

Remove the roller and remove the wound hair, and it's convenient to use scissors or a special knife that comes with some versions, or just a blade. Be careful not to damage the bristles of the roller. Rub the inside of the brush casing with a wet cloth.

Plastic tubes and connections also require periodic inspection, look inside the tube at the lumen — there should be no dust lumps or large objects that could get stuck during careless cleaning. You can wash the tubes with water, but before assembly they need to be perfectly dry.

Table of component maintenance frequency

For the convenience of users, we have compiled a schedule of recommended procedures for vacuum cleaner care, and compliance with these intervals will help to avoid breakdowns and maintain the manufacturer's warranty.

Regularity of service directly affects battery life: if the engine does not experience resistance of clogged filters, it consumes less energy, which prolongs the running time from one charge.

Rules for drying and assembly of the device

The most critical step is drying. All washed parts should be in a well-ventilated room at room temperature. Do not place the components of the vacuum cleaner in direct sunlight, near heating batteries or heaters.

Thermal effects

You only assemble it after you've made sure that all the elements are completely dry, insert the filter, close the container lid, and snap it in the case, and if you hear unusual sounds or smell burns after you turn on, immediately turn off the device and check the dryness again.

Common mistakes when caring for the Xiaomi G20

Many users make mistakes that shorten the life of the device, and one of the most common is trying to speed up drying with a hair dryer, and the hot air flow can melt the filter's adhesives or cause cracks in the plastic.

Another mistake is to use aggressive chemistry, where dishwashing or glass washing devices can leave a film on the filter that will prevent air from passing, and as a result, the suction power will drop, and the motor will work with overload.

⚠️ Warning: Never turn on the vacuum cleaner unless you are 100% sure that all the internal parts are completely dry.

Also, don't ignore the fine contaminants on the charging contacts. Rub them with dry cloth to ensure a good charge current. Oxidation of the contacts can cause the device to stop charging or to do so intermittently.

Frequently Asked Questions (FAQ)

💡

The main secret to the longevity of the Xiaomi G20 is never to assemble a vacuum cleaner until you make sure that every part of it is completely dry.