How to wash a Xiaomi electric razor: 5 proven ways + blade-care

Xiaomi electric shavers are not just shaving gadgets, but high-tech devices that require regular care. Many users face a problem: after several months of use, the blades begin to pull their hair, irritation appears, and the device itself emits an unpleasant odor. The reason is often the same – improper cleaning. In this article, we will discuss how to wash a Xiaomi razor (including Mi Electric Shaver models). S500/S600, Mijia T500/T700 And others) to make it last longer, and the shaving remains comfortable.

It's important to understand that Xiaomi's electric razors come in two types: waterproof (you can wash under running water) and non-waterproof (only dry cleaning). How do you know what type of model your model belongs to? IPX7 Or you can say "Waterproof" on the case or in the manual. If you don't have one, you can't wet the razor! And you can also look at the type of blades: the mesh blades and the rotary blades require different care.

We’ve collected the latest cleaning methods, including official Xiaomi recommendations and user life hacks, and we’ll also tell you what mistakes shorten the life of a razor by 30-50% (spoiler: one of them is the use of alcohol for disinfection).

1. Preparing Xiaomi razor for washing: what to do before cleaning

Before you start washing, follow a few mandatory steps that will save the device from breakdowns and make the cleaning process more efficient.

• 🔌 Turn off the power. If the razor is connected to the charger, disconnect the cable. Even waterproof models are not designed to be washed under voltage.
• 🧼 Remove the large hairs. Shake or brush the visible hairs from the blades and body, and prevent clogging of the drainage holes.
• 🔍 Check the integrity of the seals, waterproof models (Mijia) T700, Mi Electric Shaver 2S) There are rubber pads. If they're damaged, the water will go in.
• 📦 Remove the battery (if possible) in some models (e.g. Xiaomi Mijia) T500) Removable battery can be removed before washing - this is additional protection.

Pay special attention to locking blades. Most Xiaomi razors have a knive locking mechanism -- if you don't use it, water will get into the engine. How do you lock the blades? Usually, you just have to move the switch on the body to the position. LOCK Hold the switch for 3-5 seconds (depending on the model).

⚠️ Warning: Never wash a Xiaomi razor in a dishwasher, even if it is waterproof.High temperature and aggressive detergents destroy blade lubrication and plastic parts.

Method 1: Washer under running water (for waterproof models)

This is the easiest and most effective method for razors with markings. IPX7. Suitable for Mijia models T700, Mi Electric Shaver S600, Xiaomi Mijia T500 Pro and others with similar protection.

Step-by-step:

1. Remove the protective cover (if any) and remove the razor block.
2. Turn on the hot (not hot!) water tap. Optimal temperature is 30-40.°C.
3. Place the razor block under the stream of water with blades down. Rotate it so that water penetrates all the slots.
4. Apply a few drops of liquid soap or electric shavers (such as Xiaomi Shaver Cleaner) to the blades.
5. Carefully brush the net and knives. Don't push, you can damage the coating.
6. Wash the razor underwater again to remove the residue of soap.
7. Shake off the water and leave the block to dry on the towel with blades upwards for 1-2 hours.

Critically, after washing, do not turn on the razor until it is completely dry. Moisture inside the case can cause corrosion of contacts or short circuit.

Method 2: Dry cleaning (for non-watertight models)

If your Xiaomi razor doesn’t have water protection (e.g. old Mi Electric Shaver models) 1S Mijia T300), The washing under the tap is contraindicated, and in this case, dry cleaning using a brush and special means will help.

What you need:

• 🧹 Soft brush (comes with or is purchased separately).
• 💨 A compressed air canister (optional, for blowing out dust).
• 🧴 Alcohol wipes or alcohol-based antiseptic (no more than 70%!).
• 🛢️ Electric shavers lubricant (e.g. Xiaomi Shaver Lubricant).

How to clean:

1. Turn off the razor and remove the razor block.
2. With a brush, remove the hairs from the blades and body. Move from the center to the edges so that you don't drive the dirt inside.
3. Use a spray of compressed air to blow out dust from hard-to-reach places (hold the balloon vertically!).
4. Wipe the blades with an alcohol napkin. Don't pour alcohol directly on the razor! Easy wiping is enough.
5. Apply 1-2 drops of lubrication to the blades and turn on the razor for 10-15 seconds to distribute the oil.

⚠️ Warning: Do not use cotton swabs or toothpicks to clean the mesh, they can damage microholes. Also avoid vacuum cleaners, which create static electricity that can disable electronic components.

💡

If you do not have a special lubricant at hand, you can use petroleum petroleum petroleum (sold in a pharmacy). Apply it no more than 1 time a month and only on dry blades.

4. Method 3: Ultrasonic cleaning - is it worth trying?

Ultrasonic baths are often touted as a versatile tool for cleaning everything from jewelry to electric shavers. But is this method suitable for Xiaomi devices?

The advantages of ultrasonic cleaning:

• ✅ Removes dirt from the narrowest crevices.
• ✅ Disinfects blades without chemistry.
• ✅ Suitable for waterproof models.

Cons and risks:

• ❌ May damage rubber seals with prolonged exposure.
• ❌ Not all Xiaomi models can withstand vibration (especially with plastic parts).
• ❌ Requires a special solution (normal water is inefficient).

How to clean in an ultrasonic bath (if you decide):

1. Use only distilled water or a special solution for ultrasonic baths.
2. The temperature of the liquid is not higher than 40°C.
3. Processing time is 3-5 minutes (no longer!).
4. After cleaning, dry the razor thoroughly.

Our verdict is that ultrasound is good for deep cleaning 1-2 times a year, but not as a regular method.

5. Method 4: Disinfecting a razor - how to kill bacteria without harm

Electric shavers are a breeding ground for bacteria. Studies show that blades can accumulate up to 10 million microbes per 1 cm2 after a week of use (more than on a toilet seat!). How to properly disinfect a Xiaomi razor without ruining it?

Safe methods of disinfection:

What can't be done:

• 🚫 Soaking a razor in alcohol or chlorine - it destroys lubricant and plastic.
• 🚫 Use boiling water - deforms the mesh of blades.
• 🚫 Use abrasive cleaning products (soda, powders).

💡

For regular disinfection, it is enough to wipe the blades with an alcohol napkin after each 3-5 use. Deep cleaning (with soaking) is carried out 1 time a month.

6. Method 5: Automatic cleaning in Xiaomi stations - is it worth buying?

Xiaomi releases automatic cleaners for its razors (like the Mi Electric Shaver Cleaning Station) which promise "total disinfection in 1 minute," but are they that effective?

How the station works:

1. The razor is being installed at the docking station.
2. The cleaning solution is automatically applied.
3. Ultrasound + spinning of the blades removes dirt.
4. Hot air dries the device.

Pros:

• ✅ A fully automated process.
• ✅ Disinfects and lubricates the blades.
• ✅ Extends the life of the razor by 20-30%.

Cons:

• ❌ Expensive (3,000 to 5,000) ₽).
• ❌ Requires purchase of branded solution (Xiaomi Cleaning Solution).
• ❌ Takes up a seat on the table.

Our advice is that the station is justified if you use a razor every day and are willing to spend money on consumables.

7 Mistakes That Kill Xiaomi Razor in 3 Months

Even the most expensive Xiaomi razor can be ruined in a few weeks if you make these mistakes:

1. Storage in a wet room (such as a bath without an hood) leads to corrosion of the blades and swelling of the plastic.
2. Using a razor without lubrication, without it, the blades will blunt 2-3 times faster.
3. Brushing with toothpicks/needles, and they scratch the net, causing the razor to pull the hair.
4. Soaking the case with buttons, even in waterproof models, the electronics can fail.
5. Using aggressive chemicals (acetone, gasoline, bleach) that destroy the blades.

Another common problem is that you don't dry the razor properly, and many people put the razor on the towel with their blades down, which causes the water to accumulate inside, and you can dry it up properly in a ventilated place.

💡

If the razor begins to vibrate more strongly than usual or hum, this is a sign of moisture entering the engine. Immediately remove the battery (if possible) and dry the device in rice or silica gel for 24 hours.

8 Frequently Asked Questions