Modern Xiaomi smartphones, including the popular Redmi Note 8, feature combined slots that require careful handling when changing the operator’s card. Users often have difficulty finding a tray extraction hole or fear damaging the case when using inappropriate tools. This problem is especially relevant for those who first switch to a device with a side or specific lower layout of elements.
In this article, we will discuss in detail how to get a sim from the Xiaomi redmi note 8 without damaging the locking mechanism and the tightness of the case. You will learn about the correct location of the slot, the choice of a safe tool and the algorithm of actions in the event of jamming the mechanism. Following the instructions will help avoid expensive repairs in the service center.
Incorrect extraction can lead to sensors failure or damage to the sensor itself. SIM-So it's important to understand the physical structure of the device before you start any manipulations. We'll look at all the nuances of the procedure from preparation to reverse installation.
Location of the slot for SIM-Maps in Redmi Note 8
Unlike many modern models, where the slot is located on the side of the face, in Xiaomi Redmi Note 8 engineers decided to place the tray on the lower edge of the device. This is a classic location, typical of previous generations of smartphones, which provides better sealability and protection from dust when landing tightly. USB Type-C and microphone hole.
The tray in this model is combined, which means that you can install two nano-SIM cards at the same time or one SIM card and a microSD memory card. The design is made of plastic and metal, which requires caution when extracting, so as not to crumble the plastic partitions inside the mechanism. It is important not to confuse the SIM card hole with the main microphone hole, which is located next to it.
⚠️ Warning: Never try to insert a paper clip into a round microphone hole next to the slot, which will cause permanent damage to the audio component and loss of warranty.
For visual identification, look at the oblong oval circuit on the bottom, and that's where the extraction mechanism is hidden, and if you hold the phone with the screen to you, the slot will be on the bottom, closer to the right edge.
Necessary tools for removing the tray
You'll need a special tool to perform the surgery, which usually comes with a new smartphone. However, if the original paper clip is lost, which happens quite often, you can use alternative items, meeting certain requirements for their geometry and strength. The main condition is that the tool must be thin, rigid and have a blunt end so as not to scratch the body.
The best choice is a standard metal paper clip straightened at one end, special needle keys sold in electronics stores or a thin pin with a thickened base are also suitable. The use of sharpened objects such as sewing needles or scissors is strongly discouraged, as they can damage the inner spring of the mechanism.
💡
If there is no paper clip on hand, use a thin metal ring from the key fob, folding it in half to create a rigid tip.
Make sure the tool is clean and dry, and getting moisture or dirt inside the case can oxidize the contacts. SIM-Before starting work, wipe the tool with a dry cloth or an alcohol napkin.
- 🔧 Original metal clip from the set (ideal version)
- 📎 A regular stationery clip, straightened by 90 degrees
- 💎 Special needle key for smartphones (buyed separately)
- 🧷 Thin pin with wide base (with caution)
Step-by-step extraction instructions SIM-map
The process of extracting a SIM card from the Redmi Note 8 is technically simple, but requires a sequence of actions to prevent mechanical damage. Before starting manipulations, it is recommended to completely turn off the device, although modern smartphones support hot replacement, eliminating the risk of short circuit will not be superfluous.
Take the tool in your hand, put it down to your bottom so you can see the oval contour of the slot, find a small circular hole in the middle of this loop, which is where you're going to press. Hold the phone tightly, but without putting too much pressure on the screen or back cover.
☑️ Preparation for extraction SIM
Insert the tip of the tool perpendicular to the surface of the body into the hole. You don't have to push too hard; the mechanism will work with moderate force. Once you feel the resistance of the spring, press a little harder and sharp, but controlled. The tray should pop out a few millimeters, then it can be grabbed with your fingers.
Once the tray has appeared, gently pull it on yourself until completely removed. SIM-A map that can go out and get lost, put the extracted item on a flat surface for further work.
Features of the combined slot
The design of the tray in the Xiaomi Redmi Note 8 provides flexibility of use, but has its limitations. The slot is divided into two sections: one is exclusively for nano-SIM, and the second is hybrid.This means that you can use either a second nano-SIM or a microSD memory card, but not at the same time.
If you need to expand the memory of a device for storing photos and applications, you have to sacrifice a second SIM card, in which case a memory card is installed in the hybrid compartment, and the SIM form factor must strictly comply with the nano-SIM standard, which is the smallest one in existence at the moment.
Can I use SIM adapters?
When you install, pay attention to the shape of the notch in the corner of the card. It should match exactly the ledge in the tray. If the card does not lie flat, do not force it, turn it over or change the side. Incorrect installation can damage the contact group.
Possible problems and ways to solve them
Sometimes users are faced with a situation where the tray is not removed or gets stuck halfway, which can be caused by various factors, from the banal contamination of the mechanism to the deformation of the tray itself, Understanding the causes helps to choose the right method of solving the problem without panic.
One common cause is sticking to the mechanism due to dust or moisture, so you can try gently wiggling the phone from side to side, holding the tool in the hole to stir the spring. SIM-map inside, preventing the tray from exiting.
| Problem. | Probable cause | Method of decision |
|---|---|---|
| The tray doesn't respond to pressing | Incorrect angle of instrument input | Change the angle of the needle, find the point of resistance. |
| The tray came out, but got stuck. | Deformation SIM-card-tray | Carefully tuck the edge of the tray with thin tweezers |
| The SIM card is still inside. | Poor card fixation in the tray | Use a sticky tape or a thin needle to extract |
| The hole is too tight. | Factory marriage or getting mud | Clean the hole with compressed air, do not use force |
In cases where the tray is deformed and does not hold the card, it can be replaced. New trays are sold in parts stores and are inexpensive. Installing a new element will return the functionality of the slot and the reliability of the fixation.
What to do if the tray is jammed
The situation where the tray is jammed is one of the most stressful for the smartphone owner. If the standard press does not help, and the tray only slightly rises, but does not come out completely, it may have formed a skew inside, in which case you can not use excessive force, because this will lead to breakage of the plastic guides.
Try rocking. Put a little pressure out there and wiggle the phone a little bit, and sometimes it helps to use two tools: one that keeps the tray tense, and the other that has a thin needle that gently pulls the edge of the card or the tray through the slot.
⚠️ Attention: If the tray is not removed after a few careful attempts, stop acting on your own. Further manipulation may damage the motherboard.
There's also a superglue method, but it's extremely risky and requires jewellery precision, and it's applied to the end of a thin stick, pressed against the tray, waited for drying and pulled, but the risk of gluing the entire machine is too great, so it's considered a last resort for skilled craftsmen.
💡
The main rule when jamming: it is better to leave the tray alone and contact the professionals than break the slot and get expensive repairs.
Proper installation SIM-cardboard
After successfully retrieving or replacing the card, you must correctly install the tray back. SIM-The map is within its boundaries and does not protrude beyond the edges of the tray. The protruding card will become an obstacle to closing and can break when pressed in.
Focus on the bevelled corner of the tray and the maps, the only correct way to set up the tray, put it into the case to the end. It should enter easily and without resistance. If you feel a push, don't push, take it out and check the orientation.
After switching on the phone, the system automatically determines a new one. SIM-If that doesn't happen, check the cleanliness of the contacts. Rub the golden surface of the map with a soft eraser or cloth soaked in alcohol.
- 📱 Make sure the bevelled corner of the card matches the bevelled corner of the tray
- 🧹 Wipe your contacts. SIM-dried-up cards before installation
- 🔙 Insert the tray strictly perpendicular to the face of the phone
- ✅ Check the appearance of the network signal after the device is turned on