How to get it safely SIM-Map from Xiaomi Redmi 6: All ways + quirky

Extraction SIM-The cards from the Xiaomi Redmi 6 smartphone seem like a simple task – until you encounter a jammed tray, a broken key or an unexpected hybrid slot. The 2018 model is still popular due to its price-performance balance, but its design is fraught with several pitfalls. For example, many users are unaware that the Redmi 6 uses a combined slot for two nano-SIMs or one. SIM + microSD, which means that improper extraction can damage both the memory card and tray.

In this article, we’ll look at all the possible ways to get a Redmi 6 SIM – from the standard key method to emergency solutions if the tray is stuck. You will learn how to avoid common mistakes (such as using a needle instead of a key), what to do if the slot is not fixed, and how to check the performance of the slot. SIM And for those who are planning to replace the card, we've prepared a table of compatibility of operators with Redmi 6.

If you need to change your SIM immediately, but you don't have a brand key at hand, don't panic. In 90% of cases, you can solve the problem by means at hand without having to disassemble the phone, the main thing is to follow the instructions and not apply excessive force to the mechanism of the slot.

1.Preparation: What will be required to extract SIM-map

Before you start retrieving, make sure you have everything you need. In the case of the Xiaomi Redmi 6, the standard delivery kit includes a metal key for the slot (aka "clip"), but if you lose it, it's no problem. Alternatives are suitable, but with reservations.

Here is a complete list of tools and materials:

• 🔑 Brand key (combined with phone) The best option is thin, with a curved end.
• 📍 A paper clip or a stationery pin, only if you open it so that the end is straight and not thicker than 0.5 mm.
• 🔧 Tweezers (to remove the tray if it falls inside the body).
• 📱 The second smartphone with a flashlight - useful for highlighting the slot.
• 🧴 Alcohol wipes (for cleaning contacts) SIM post-extract).

⚠️ Warning: Never use a needle, toothpick or knive to remove a tray, they are too thick or sharp and can damage the fixation mechanism, at worst, break the plastic guide inside the phone.

If you are planning to replace SIM-map, check its size in advance. 6 It only supports nano-sim (12.3 × 8.8 Micro-SIM or standard cards will have to be trimmed (not recommended!) or replaced in the cabin of the operator.

2. Standard method: extraction by key

This is a basic method that works 99% of the time if the tray is intact, and is suitable for all Redmi 6 variants (including Redmi). 6A Redmi 6 Pro).

Algorithm of action:

1. Turn off your phone (optional, but recommended for safety).
2. Find a slot for SIM-maps - it is located on the left end of the body (if you look at the screen).
3. Put the key in a small hole next to the slot, and it's got to be a little click.
4. The tray will be pushed out by 2-3 mm - gently pull it with your fingers and completely remove it.

If the tray is not extended:

• 🔄 Check that the key is inserted to the end (sometimes effort is required).
• 🔍 Light the hole with a flashlight – it may have been dust or debris inside.
• 🔧 Try to shake the key left-right without removing it.

Is the phone off?|Is there a key or paperclip at hand?|Is the slot lit up SIM?|Have your hands checked for dryness?-->

After removing the tray carefully remove SIM-Notice the position of the card: the contacts must be turned downwards, and the bevelled angle must match the shape of the slot.

⚠️ Note: Do not touch the gold contacts. SIM-Fat marks can impair the connection. If you touch it, wipe the card with an alcohol napkin.

3. Alternative methods if there is no key

Lost your corporate key? No problem. Here are 4 proven methods that will help you extract the tray without special tools.

Method 1: Paperclip or pin

The most reliable key substitute, the main thing is to prepare the tool correctly.

1. Untighten the paperclip so that a straight wire 3-4 cm long is obtained.
2. Bend the tip at an angle of 30-45 degrees (this will help to hook the mechanism).
3. Put it in the hole and press until you click.

Method 2: Ear wand (for emergency cases)

If you only have cotton and plastic at hand:

• 🧼 Break a part of the stick, leaving a thin plastic rod.
• 🔥 Gently melt the tip with a lighter so that it becomes thinner.
• ⚠️ Use only if other methods are not available – plastic can break down inside.

Method 3: Blade or thin knife

Extremely suitable only for knives with a very thin blade (such as stationery), insert the blade sideways, not pointing, so as not to scratch the body.

Method 4: Suction (for stuck tray)

If the tray is extended halfway but not removed:

1. Stick a small suction cup (for example, from the mount for the phone in the car) to the end of the tray.
2. Pull it carefully - the vacuum will help to pull it out without damage.

💡

If the tray is stuck due to moisture, put the phone in a bag with silica gel for 1-2 hours. the condensate will evaporate, and the mechanism will unlock.

4.What to do if the tray is stuck or broken

One of the most frustrating things is that the tray doesn't go out at all, and the reasons can be anything from dust to mechanical deformation. So let's look at 3 scenarios and solutions.

Scenario 1: The tray extends halfway and gets stuck

Most of the time, it's because of a skew.

1. Carefully swing the tray left-right with your fingers.
2. Put it on both sides with plastic mediators (not metal!).
3. If it does not help - moisten the cotton swab with alcohol and wipe the guides.

Scenario 2: The key scrolls, but the tray does not come out

The reason is that the internal fixation mechanism has broken.

• 🔧 Try inserting the key at a different angle (sometimes turning 10-15 degrees helps).
• 📱 If the phone is on, check if the battery is blocking the tray (typical for phones after falls).
• 🔨 In the extreme, take the phone apart (experience required!).

Scenario 3: The tray fell inside the hull

The hardest case.

1. Remove the back cover (in Redmi 6 it is glued, you need a mediator and a hair dryer).
2. Disconnect the battery line (required!).
3. Tweezers remove the tray through the slot hole.

⚠️ Note: If you are not sure about your disassembly skills, contact the service center.The cost of extracting the tray in Xiaomi is ~500 rubles, which is cheaper than a potential repair after self-attempts.

5.Verification SIM-post-extract

You took the card, but the phone doesn't see it? Don't rush to blame the operator.

• 🔍 Integrity of contacts. SIM There should be no scratching, rubbing or oxidation (green plaque).
• 📏 If you cut the micro-SIM to nano, make sure you don't touch the chip.
• 🔄 The map should sit tight, without backlash.
• 📶 Slot performance. Insert another. SIM — If it is not identified, the problem is the phone.

If you're in contact SIM They are oxidized and can be cleaned carefully:

1. Soak the cotton swab in an alcohol solution (not vodka!).
2. Wipe your contacts with light movements.
3. Let the card dry for 5-10 minutes before installation.

To diagnose the slot in Redmi 6, use the engineering menu:

##4636##

Go to the phone information section and check the status SIM. If the status is No service or Unknown, the problem is in the slot or communication module.

6. Frequent mistakes and how to avoid them

Even in a simple process like extraction. SIM, And users make mistakes that are expensive to make. TOP-5 Failures and how not to repeat them:

• 🔨 Use force. If the tray doesn't go, don't push it hard. You better check if it's skewed.
• 🧲 Some of the craftsmen try to pull the tray out with a magnet, which can damage the compass of the phone.
• 🔥 Heating the case, a hair dryer or hot water won't help you remove the tray, but it will melt the adhesive of the lid.
• 📵 Extraction SIM When the phone is on, it can cause a crash in rare cases. IMEI.
• 🔄 Installation of the tray wrong. If you put it upside down, the phone won't see. SIM.

Critical error: using superglue to fix the tray, the glue will get on the contacts. SIM and will destroy them without any possibility of recovery.

If you change often SIM-maps (for example, on trips), consider the option with a double tray. For Redmi 6, original parts from Xiaomi with an article are suitable MDY-08-ES (cost ~400 rubles. It can be installed independently in 10 minutes.

💡

If, after extraction, SIM phone stopped seeing the network, first check if the settings are wrong APN. Path: Settings → SIM-maps and mobile networks → Access points (APN).

7.How to care for the slot SIM Redmi 6

To avoid problems with extraction SIM In the future, follow simple rules of care:

• 🧹 Clean the slot. Every 3-6 months, blow the hole with compressed air (keyboard cylinder).
• 🚫 Wet protection: Do not leave your phone in wet areas (bathroom, bathhouse).
• 🔋 Careful replacement, when you install a new one. SIM Do not press the tray - it should come in smoothly.
• 📦 Keep the key in your phone case or in a bunch of keys.

If you are often in dusty conditions (construction, off-road trips), use a protective film for the slot, which can be cut out of scotch or bought ready-made (for example, OtterBox Alpha Glass).

To check the tightness of the slot after cleaning:

1. Turn off the phone.
2. Blow into the key hole – if you feel resistance, the dust will not get in.
3. If the air passes freely, disassembly and cleaning are required.

FAQ: Answers to Frequent Questions