Replacement of a communications operator or installation of a new SIM-The cards in the Xiaomi Mi 5 smartphone are usually easy to find, but owners of this device often face a custom design tray. Unlike many modern models where the slot is combined, it uses a specific mechanism that requires caution. Incorrect actions can cause damage to internal contacts or a jamming of the extraction mechanism, which will require more complex intervention.
In this article, we will discuss in detail how to safely remove the SIM, what tools are needed for this, and what to do if the tray does not respond. We will also look at typical user errors and methods for eliminating them without risk to the device. Xiaomi Mi 5 is a device with a metal case and glass inserts, which imposes certain restrictions on physical impact.
Before you start any manipulation, make sure you are in a well-lit place and your hands are dry.This is a basic safety requirement that is often ignored, leading to tool slips and scratches on the body.Mindfulness at the initial stage will save you time and nerves.
Preparation of the workplace and necessary tools
To do this successfully, you'll need the minimum toolkit that any user has, and the basic element is a paper clip to remove the tray that comes with the device, and if the original paper clip is lost, you can use a thin paper clip to straighten one of the ends of it, or a pin.
- 📌 The original paper clip for SIM pin-needle.
- 🔦 Bright light source for better micro-hole view.
- 🧤 Dry hands or antistatic gloves (optional).
- 🧹 Compressed air to clean the slot (in case of dust).
It is important that the tool you choose is strong enough, but not too thick. Using knives, toothpicks or other inappropriate items can cause the locking mechanism inside the case to break. A metal needle or a quality clip is the ideal choice for working with the Xiaomi Mi 5.
It is recommended to turn off the smartphone before starting work, although modern devices support hot replacement. SIM-If you have a card, software failures when you retrieve it, it can cause the system to fail to see the card after you re-install it, and if you turn off the power, it will also protect the contacts from accidental power surges.
Standard method of tray extraction SIM-map
The main extraction mechanism in Xiaomi Mi 5 is located on the lower end of the device, next to the USB Type-C port. The tray is oblong and designed to install one nano-SIM card. The design involves pushing the tray out when pressed on a special pin inside the hole.
Find a small circular hole on the bottom end, which is symmetrically positioned relative to the center of the edge, but is offset away from the charging port, insert the tool perpendicular to the surface of the shell into this hole, and the movement should be straight, without distortion, so as not to damage the internal guides.
⚠️ Attention: Don't push too hard. It's a light but sharp pressure. If the tray doesn't move out, you may have hit the wall of the body instead of the mechanism.
Once you feel resistance and click, the tray should move a few millimeters out, then it can be gently tucked with a nail or tweezers and removed completely. Be careful not to drop the small nano-SIM card, as it can easily get lost.
☑️ Pre-extraction check
What to do if the tray is stuck or not removed
The situation where the tray SIM-The cards get stuck, not so rare, especially on devices that are in use for a long time. In Xiaomi Mi 5, the cause is often dust, pile or oxidation of contacts, which increases friction. It is also possible deformation of the tray itself due to previous careless extractions.
The first step in this situation is to inspect the hole carefully in bright light, try to clean the inlet gently with compressed air or a thin dry brush, sometimes a foreign particle blocks the movement of the mechanism, and its removal solves the problem.
If there's no visual obstruction, try changing the angle of the tool, insert the paper clip, and with a little pressure, try micro-motion up and down or clockwise, and this can help you find the right position to activate the spring mechanism.
| Symptoms. | Possible cause | Method of decision |
|---|---|---|
| The tray doesn't respond to pressing | Displacement of the mechanism inside | Try to push at different angles |
| The tray moved out, but stuck halfway. | Deformation of tray frame | Carefully tweezer, do not pull. |
| Crunch heard when pressed | Breakdown of plastic guides | Requires disassembly of the body (service) |
| The tray is being pulled too tightly. | Pollution or oxidation | Cleaning with alcohol and compressed air |
In case the tray is partially removed but stuck, do not pull it by force at all, which can cause the mechanism to break off or damage the plumes located in the immediate vicinity, use a thin tweezer to grab the visible part of the tray and, swaying from side to side, slowly pull it out.
Alternative glue method
Extraction SIM-cards when the device is completely disassembled
There are scenarios where standard extraction is not possible, such as if the mechanism is broken inside the case, or if the tray is missing at all, in which case the only solution is to partially or completely disassemble the Xiaomi Mi 5 smartphone.
First, you need to remove the back glass cover, which is glue-based, so you need to preheat the perimeter of the device to about 80-90 degrees Celsius, use a thermophene or a special heating pad, but don't overheat the glass so it doesn't burst.
Once the lid is removed, you have access to the internal components, you have to unscrew the screws that hold the metal frame, and remove the top speaker board, and then you can see the bottom end of the body from the inside, where the SIM tray mechanism is located.
- 🔧 Heating the case to soften the glue.
- 🧲 Use of suction cups and mediators for opening.
- 🪛 Unscrewing of the screws of the lower part of the frame.
- 👐 Careful shutdown of main board plumes.
By accessing the mechanism from the inside, you can manually push the tray or remove the stuck one. SIM-This technique also allows you to clear the internal guides of accumulated dirt that could cause jamming.
⚠️ Warning: Disassembling your smartphone automatically deprives you of warranty (if it is still valid) and carries a high risk of damage to fragile plumes and connectors.
Common Mistakes and How to Avoid Them
One of the most common mistakes is trying to insert SIM-The Xiaomi Mi 5 uses the nano-SIM format. SIM with cropped edges can lead to the fact that the card will jam in the tray, and it will be impossible to remove it without damage.
Another mistake is to use excessive force to insert the tray back, so the tray must enter smoothly and to the end with a slight click. If you feel strong resistance, the card is set incorrectly or the tray is skewed. Forced indentation can damage the contacts inside the slot.
Keep in mind that it's clean. Dust and small debris, when they get into the slot along with the card, create an extra layer that eventually thickens and interferes with the normal operation of the mechanism. SIM-dry-cloth map before installation.
💡
Use an adapter to SIM-Cheap plastic adapters often have the wrong geometry and can get stuck in the Xiaomi Mi 5 slot.It is better to use the original adapter or operator services to replace the card.
Checking after installation
After you have been able to safely re-install and re-install SIM-You need to make sure the communication module is working correctly. MIUI. Pay attention to the top line of the state: there should appear the signal level and the name of the operator.
If the network doesn't show up, go to the settings menu. The path usually looks like this: Settings. → SIM-maps and mobile networks, make sure that the slot is activated, and in some cases, you have to manually select the type of network (4G/3G/2G) operator.
Take a test call or send it. SMS-Check the mobile Internet by turning off Wi-Fi. If all the functions are stable, then the procedure was successful and the contacts were not damaged during the manipulation.
💡
The main key to success with the SIM tray in the Xiaomi Mi 5 is the perpendicular introduction of the tool and the lack of jerky movements. Patience and accuracy are more important than strength.