How to get it. SIM-Map from Xiaomi phone: a guide

Xiaomi smartphone owners often face the need to replace SIM-While the procedure may seem simple, inexperienced users may have difficulty changing operators or installing a new SIM with a large amount of memory, especially if the tray is tightly sitting in the case or a special paper clip has long been lost. Removing the tray is the first step to setting up the connection, and you need to do it correctly so as not to damage the mechanism.

In this article, we will discuss in detail all the nuances of working with a tray for SIM-cards in the devices of the Xiaomi, Redmi and POCO. You will learn exactly where the hole for extraction is, what tools can be used in emergency cases and what you absolutely can not do to not break the smartphone. SIM-card and memory card simultaneously.

We'll focus on situations where the standard method doesn't work. There are times when the tray gets stuck due to dust, warping, or previous careless attempts to extract. Understanding the design of your device will help avoid costly repairs at the service center. The main rule of safety is never to use excessive force unless the mechanism is easily pressed.

Location of the tray and necessary tools

The first thing to do before starting the procedure is to determine the exact location of the slot. In most modern Xiaomi models, such as the Redmi Note or Xiaomi Mi, the tray is located on one of the side faces of the case, most often the upper end of the device, but in some models it can be located at the bottom or side, next to the volume buttons.

Removal requires a thin metal object. The smartphone always comes with a special key clip, but it is easily lost. If the original tool is not at hand, you can use a regular paper clip, straightening one of the ends of it. Also suitable are thin earrings-carnations or special needles for SIM-cards sold in electronics stores.

It is crucial to avoid using thick objects such as toothpicks or sewing needles.A wooden toothpicking can break inside the hole, blocking the mechanism, and a too thick needle will damage the internal contacts.Make sure the tool chosen has a diameter corresponding to the hole in the tray, usually about 1-1.5 mm.

Visually inspect the ends of your gadget, you should see a narrow slot about 2-3 cm long and a small circular hole next to it. This is the hole that you will need to press with the tool. In some protected models or phones with moisture protection, the hole may be slightly narrower, which requires a more accurate hit.

Step-by-step instructions for removing the tray

The process of extracting a SIM card from a Xiaomi phone is technically simple, but requires accuracy and a certain sequence of actions. First turn off the device. Although modern smartphones support hot SIM replacement, power outage eliminates the risk of short circuit or software errors when reading card data.

Take a prepared tool (a paper clip or key) and place it perpendicular to the edges of the smartphone. Put the tip in the round hole to the point. You should feel a slight click or spring resistance. After that, slightly press in and simultaneously pull the tray out. It should go a few millimeters, which will allow you to grab it with your fingers.

If the tray is partially out, gently pull it over the edge until it is fully removed. Don't pull sharply so as not to damage the plastic guides inside the enclosure. After removal, inspect the tray: it has notches for the purpose of removing the tray. SIM-Nano-SIM cards, and perhaps a microSD card. Notice the bevelled corner of the card, which should match the circuitry on the tray.

What to do if the tray is stuck or not taken out

The situation where the tray SIM-The cards get stuck and not retrieved by the standard method, are infrequent, but cause panic among users. The main cause may be dust, pile or small debris accumulated inside the hole during operation.

Try tapping your phone gently with your hand edge in the tray area, holding the device down, which will help knock out any possible dust. You can also use a can of compressed air to blow the hole, but you should do this with caution, so as not to drive the dirt deeper. Do not use a liquid to clean!

⚠️ Warning: If the tray is not removed after light pressing, do not attempt to crack the slit with a knife or blade.You risk damaging antenna contacts or scratching the body, resulting in loss of warranty.

In some cases, it helps to sway the tool from side to side inside the hole while you press in at the same time, and this can help to release the jammed mechanism, but if the tray still does not respond, the inner spring or guide may have broken, in which case further independent actions can lead to the failure of the body.

Features of the design in different Xiaomi series

Xiaomi’s range is extensive, and the design of the trays may vary depending on the series and year of the device’s release, and understanding these differences will help avoid errors in the extraction and installation of cards.

In the Redmi series, and POCO In recent years, the Mi and Xiaomi flagship models have often been abolished in favor of increasing the amount of internal memory, so the tray is only designed for two. SIM-map.

It is worth noting that some older models may have been non-removable in the traditional sense, requiring the removal of the back cover. However, modern Xiaomi smartphones, where the battery is not removable, use only the end-removal mechanism. Always check the specification of your particular model if in doubt.

💡

Before installing a new one SIM-wipe its contacts with a soft dry cloth, fatty traces or dust can cause a bad signal or error in reading the map.

Problems with definition SIM-postcard

Once you've managed to pull the SIM card out of a Xiaomi phone and install a new one, the device may not see the network. This is a common problem that's solved by checking the installation is correct. Make sure the card is in the tray tightly and the bevelled angle matches the pattern.

Sometimes contact is on the very SIM-You can also check if the card is damaged, if it's oxidized or contaminated. You can wipe the gold chip with a soft cloth. You can also check if it's damaged, because cracks or deep scratches on the chip can make it unworkable. If the card is old and cut from the Mini or Micro format to Nano, it may be too thick and not fit into the tray.

⚠️ Note: Never use an adapter for SIM-The plastic adapter often gets stuck inside the tray, and it can be extremely difficult to remove it without disassembling the phone.

If the map is physically set correctly but there is no connection, try restarting the device. In rare cases, you need to reset your network settings. Go to the Settings menu. → SIM-maps and mobile networks and make sure the slot is activated. Also check if the "On the plane" mode is in place».

Frequently Asked Questions (FAQ)

💡

Proper maintenance of the tray SIM-The card extends the life of the contact group and provides a stable network signal.