How to get it safely SIM-Map from Xiaomi Redmi 8: instructions with photos and nuances

Xiaomi Redmi 8 – a popular smartphone with a hybrid slot for two SIM-card SIM + But even the most experienced users sometimes have difficulty retrieving the tray: jamming the mechanism, not being able to pick up the hole or the card is stuck inside. SIM-cards, including emergency methods, if the standard key is lost or broken.

It is important to understand that improper actions can lead to damage to the slot (for example, if you push too hard on the tray) or even break the motherboard (if liquid or metal particles get inside the case).

If you've never taken it out before SIM-A map from Redmi 8, start with preparation: find the original key (or its equivalent), provide good lighting and make sure the phone is turned off.

Preparation for extraction SIM-maps: what you need

Before you start the procedure, check if you have the tools you need, and without them, you risk damaging your smartphone or getting stuck halfway through.

• 🔑 The original key for SIM-A tray (company with Redmi 8) If you lose it, you'll find a paper clip, an unbended stationery button or a special reset needle (sold in electronics stores).
• 📱 Smartphone off. This is a must: hot reboot during card retrieval can damage the communication module.
• 💡 Bright light source (desktop lamp or flashlight) The key hole on the Redmi 8 is small and in poor lighting it's easy to miss.
• 🧴 Alcohol wipes or cotton swab (optional) may be useful if the tray is contaminated or sticky.

If you don't have the original key, don't use the first sharp objects you see (knives, forks, toothpicks).

• 🔴 Scratching the metal tray case.
• 🔴 Bend the locking mechanism SIM-map.
• 🔴 Break through the sealing gum (if any), which will lead to dust getting inside.

⚠️ Warning: Do not use magnets or metal objects with a strong magnetic field (such as screwdrivers with a magnetized tip.

If you are planning to replace SIM-The map is new, cut it to nano-SIM size (if larger). Redmi 8 uses only this format. Use a special template or scissors with thin blades to trim.

Where is the slot for SIM-Maps in Xiaomi Redmi 8

Unlike some Xiaomi models, where the slot is located on top or side, in Redmi 8 it is on the left end of the case (when you look at the screen with your face), which is a typical place for most smartphones of the brand, but for beginners sometimes there is confusion.

To accurately identify the slot, pay attention to:

• 🔍 Small hole with diameter ~0.8 mm – this is where the key is inserted.
• 🔍 The contour of the tray, which slightly protrudes over the body (on some copies it is almost flushed with a face).
• 🔍 Microphone bay – the slot is located next to it (below if you hold the phone vertically).

The photo below shows the exact location (clickable to zoom in):

If you can't find the slot, you may be holding the phone on the wrong side. Turn it over with the screen to you and look at the left end -- the hole should be visible. In rare cases, it can be covered with a protective film (if the phone is new).

⚠️ Note: Do not confuse the hole for SIM-A tray with a microphone hole (below and wider) or a reset hole (available on some routers, but not on the Redmi 8) inserting the key in the wrong place can damage internal components.

Step-by-step instructions: how to remove SIM-map from Redmi 8

Now, to the process itself, follow the instructions strictly in steps to avoid mistakes.

1. Turn off your smartphone. Press and hold the power button, then select Turn off. Wait for the full shutdown (the vibration and charging indicator will go out).
2. Take the key for SIM-If you use a paper clip, unwind it so that the tip is straight and has no burrs.
3. Put the key in the hole. Press it hard. ~1.5-2 kg (like when you press the keyboard) should be clicked, and the tray will move a little.
4. Take the tray out carefully. Don't pull it around the corner, grab the side edges so you don't bend.
5. Extract. SIM-If it's stuck, just swing the tray left and right.
6. Put the tray back in. Make sure it's up straight (without skewing) and it's in the grooves all the way through.

If the tray is not moved the first time:

• 🔹 Check if you press the key hard enough (sometimes it takes more effort than you think).
• 🔹 Try to swing the key slightly left-right inside the hole.
• 🔹 Light the hole with a flashlight – you may not be in the center.

Critical: If after the extraction SIM-The smartphone stopped seeing the network, check if the contact pin inside the slot has bent (this is a common problem with careless handling.

What to do if SIM-card stuck in the slot

The situation when the card is not taken out of the tray or the tray does not return to its place is more common than it seems.

• 🔧 Deformation of the tray (for example, if it was stepped on it).
• 💦 Getting moisture or dirt into the mechanism.
• 🔄 Incorrect installation (card inserted by the wrong side).
• 🔥 Overheating of the smartphone, due to which the plastic tray expanded.

Here's what we can do:

Method 1: Careful swaying of the tray

If the tray is not fully moved:

1. Take him with tweezers or nails.
2. Slowly move left-right, at the same time pull on yourself.
3. Don’t put too much effort into it – plastic is fragile!

Method 2: Using Scotch

If the card is "stuck" to the tray:

1. Cut a small piece of scotch.
2. Stick it to the end. SIM-cards (not to contacts!).
3. Carefully pull the scotch.

Method 3: Disassembly of the smartphone (extreme case)

If the tray is jammed completely and the card needs to be removed urgently (for example, when changing the operator), you will have to remove the back cover.

1. Heat the back panel with a hair dryer (temperature) ~60°C) to soften the glue.
2. Tap the lid with a plastic spatula (start at the corner next to the USB-port).
3. Unplug the battery plume, then carefully pull out the tray with tweezers.

⚠️ Warning: Disassembling the Redmi 8 without experience can damage the plumes (especially the flexible battery cable) or detach the touchscreen.

💡

If the tray is jammed due to fluid intrusion, don't dry your smartphone with a hairdryer! put it in a silica gel bag for 12 to 24 hours, then try to remove the card again.

How to avoid problems with SIM-future-tray

Not to face jamming of the tray or damage SIM-Maps, follow these tips:

• 🔄 Clean the slot regularly. Every 3-6 months, wipe the tray and key hole with a cotton swab dipped in isopropyl alcohol.
• 🚫 Don't change. SIM-Always turn off your phone before you pull it out, even if "last time it slipped».
• 📦 Keep the tray properly. If you take it out for a long time (for example, when changing a card), put it in a case or box so as not to bend.
• 🔧 Don't use the tray as a lever. Some users try to open the back cover by traying it, and that's guaranteed to break it.

If you travel frequently and change SIM-For new Xiaomi models (like the Redmi Note 12 or Xiaomi 13), this solution will eliminate the problems with physical cards.

Pay attention to the quality as well. SIM-Cheap cards with a thin plastic base can break when removed. Better to use cards from trusted operators (MTS, Beeline, Television).2, MegaFon, which are manufactured according to the standard ISO/IEC 7810.

💡

If the tray starts to jam, don't wait until it jams permanently. The sooner you clean the mechanism, the less risk of serious failure.

Frequent Mistakes and How to Avoid Them

Even in a simple process like extraction. SIM-Maps, users make mistakes. These are the most common ones:

Another common mistake is to confuse the sides. SIM-If you put the card back in, the contacts should be downwards (to the back of the phone), and the angle should be bent to match the angle on the tray, and if you insert the card incorrectly, the smartphone will not see it, and if you press it, you can damage the contacts.

If, after extraction, SIM-The phone stopped seeing the network, follow the following steps:

1. Reboot your smartphone.
2. Check if the card is installed correctly (contacts should fit tightly).
3. Enter Settings → SIM-maps and mobile networks and select the operator’s network manually.
4. If nothing helps, try another one. SIM-card to rule out its malfunction.

Alternative methods of extraction SIM-keyless

The situations are different: the key is lost, broken or never was (for example, if the phone was bought used), in this case, you can use the available means.

• 📎 A paper clip. Spread it so that the tip is straight and thin (~0.8mm) is ideal for the Redmi 8 hole.
• 🖊️ The gel pen rod, pull out the rod, rinse it with alcohol, and insert it into the hole, and it's strong enough to push the mechanism.
• 🧲 Needle for pumping balls or bicycle wheels, any thin metal needle without burrs will do.
• 🔧 A special tool for repairing phones, and smartphone disassembly kits often have plastic or metal keys for the device. SIM-sling-tray.

If you do not have any of the above, you can try the method with duct tape:

1. Cut a strip of scotch ~5 mm wide.
2. Then, put it on the back of the sleeve (the sleeve).
3. Carefully pull the scotch while pressing the key (if any).

As a last resort, if the tray is pushed out, but it's not pulled out to the end, you can use tweezers. SIM-card so as not to damage the contacts.

⚠️ Warning: Never use a knife, scissors or screwdriver to remove the tray. Even if you can pull it out, you are almost guaranteed to damage the locking mechanism or scratch the body. In service centers, such cases are classified as “mechanical damage”, and repairs will not be free of charge under the guarantee.

FAQ: Answers to Frequent Questions