Cleaning vacuum cleaner Xiaomi Dreame V10: disassembly, washing and drying of all details

Why regular cleaning of the Dreame V10 is the key to its long-lasting performance

The Xiaomi Dreame V10 wireless vacuum cleaner has become a popular choice thanks to its powerful suction (up to 150 AV in turbo mode) and convenient ergonomics. However, even the most advanced technology requires regular maintenance: clogged filters reduce performance by 30-40%, and accumulated dust in the brushes can lead to engine overheating. If you notice that the vacuum cleaner has become worse at collecting garbage, emitting uncharacteristic noise or discharges faster, it is time for a deep cleaning.

Unlike traditional vacuum cleaners with bags, Dreame V10 It has a multi-stage filtration system: cyclone separator, HEPA-And the filter and the metal mesh, each one of which requires a different approach to cleaning, like a wash. HEPA-A filter under running water reduces its life by 40%, while proper drying extends the service life to 12 months. In this article, we will analyze how to clean all vacuum cleaner nodes without the risk of damaging them, and also reveal the secrets of professional care, which the manufacturer does not always indicate in the instructions.

Preparation for cleaning: what you need and safety measures

Before you start disassembling the Dreame V10, prepare the workspace and tools.

• 🧼 Soft brush (a toothbrush or brush for drawing is suitable) - for cleaning cracks and ribbed surfaces.
• 🧴 A dishwashing agent (without abrasives) or a specialized cleaner for machinery (for example, Kärcher RM 519).
• 💦 Warm water (not above 40)°C) - hot can deform plastic parts.
• 🧻 Microfiber wipes or paper towels for drying.
• ⚙️ Cross screwdriver (size) PH0) — Removal of the motor's protective grille (with deep cleaning).

Important: Never use for cleaning:

• 🚫 Acetone, gasoline or solvents – they destroy seals and plastic.
• 🚫 Hard sponges or metal brushes – scratch the coating and filters.
• 🚫 Drying hair dryer – hot air flow can melt small parts.

⚠️ Warning: Be sure to remove the battery before disassembling (open the lid at the bottom of the handle and pull the ribbon).Mummy contact with lithium-ion cells can lead to short circuits or even fire. If the battery is swollen - do not try to clean the vacuum cleaner yourself, contact the service center.

Step-by-step cleaning of dust container and cyclone filter

The dust container and the cyclone separator are the heart of the Dreame V10 filtration system, and this is where the primary separation of debris from air occurs, and if these elements are clogged, the vacuum cleaner loses up to 50 percent of its power and starts to overheat.

Cleaning instructions:

1. Removal of the container: Press the unlock button on the vacuum cleaner body and pull the container over you. Inside, you will see a cyclone filter (conical shape) and a removable cover.
2. Dispose of garbage: Shake the contents in the bin. Use a soft brush or vacuum cleaner with a narrow nozzle to remove the adhesive dust.
3. Cyclone filter wash: Wash it under warm water with a detergent, and pay special attention to the ribbed channels, which accumulate most of the contaminants.
4. Dry: Wash the filter with a napkin and leave it to dry for 24 hours in a well-ventilated area. Do not collect the vacuum cleaner if the filter is wet!

The manufacturer recommends cleaning the container after every 3-5 use, but in practice, the frequency depends on the intensity of cleaning. For example, if you clean after repairs or have pets in the house, cleaning should be done more often.

Cleanup HEPA-filter and metal mesh: nuances and errors

HEPA-High Efficiency Particulate Air filter in Dreame V10 It's responsible for trapping tiny particles (up to 0.3 microns), including pollen, bacteria and allergens, and improper cleaning is the most common cause of vacuum cleaner failure, and many users make a critical mistake: wash the filter under pressure of water or use aggressive detergents, which leads to the destruction of fibers.

How to clean properly HEPA-filter:

• 🧹 Dry cleaning: Carefully tap the filter on a hard surface (such as the edge of the table) to shake off the dust. Then walk through the folds with a soft brush or use a vacuum cleaner at minimum power.
• 💧 Wet cleaning (only as a last resort!): If the filter is heavily polluted, wash it without pressing under a weak stream of water with a temperature not higher than 30°C. Do not rub or twist the material.
• ☀️ Drying: Place the filter on a clean wipe away from direct sunlight. Drying time is at least 48 hours. Make sure it is completely dry before you put it back in.

Metal mesh (located under the HEPA-It is easier to clean with a filter: it can be washed underwater with detergent and dryed with a dryer in cold mode (keep at a distance of 20 cm). The main thing is to make sure that there are no cleaning agent divorces on the grid that can clog the pores.

⚠️ Note: If after cleaning HEPA-The vacuum cleaner is getting worse at the filter, check if it's installed correctly. Failure to follow the direction of the air flow (indicated by the arrows on the filter body) leads to reverse traction and a drop in performance.

Cleaning the main brush and turbobrush: remove hair and thread

Dreame V10 brushes are the most vulnerable spot in a vacuum cleaner, where the hair, thread and fur of animals are wound onto the roller, blocking its rotation, which not only reduces the efficiency of cleaning, but also increases the load on the brush engine, which can cause it to burn out.

How to clean the main brush:

1. Remove the brush from the vacuum cleaner by pressing the lock button.
2. Turn it over and use a knife or scissors to gently cut the wound hair at the base of the roller, so don't pull it, so you can damage the bristles.
3. Wash the body of the brush underwater, removing dust from the bearings. To do this, spin the roller with your hand so that water penetrates all the gaps.
4. Rub the brush with a napkin and leave it to dry for 10-15 minutes. Before installing, check if the roller is rotating freely.

The turbobrush (if it comes with your kit) is cleaned in a similar way, but requires special attention to rubber blades. They can't be washed with hot water, they can deform. Use a wet wipe with soap solution to remove the sticky dirt.

💡

If the brush creaks or turns in jerks after cleaning, drop 1-2 drops of silicone lubricant (for example, WD-40 Specialist) into bearings. Do not use regular oil - it attracts dust.

Deep cleaning: engine, ducts and seals

If the vacuum cleaner is still inefficient after cleaning all the removables, the problem may be that the internal ducts or the engine are contaminated, a procedure that requires care, but can be done on its own.

Instructions for cleaning ducts:

• 🔍 Visual inspection: Light a flashlight into the container hole. If you see dust, use a flexible brush (you can make it out of wire and rags).
• 💨 Purging: Use a spray of compressed air (such as cleaning a keyboard) to blow dust out of hard-to-reach areas. Keep the balloon vertical to avoid moisture.

To clean the engine (if you hear a noise or smell of burning):

1. Remove the protective grille on the back of the vacuum cleaner by unscrewing 4 screws (cross screwdriver PH0).
2. Remove dust from the fan blades with a soft brush. Don't touch the contacts and wires.
3. Check the sealing gums for wear and tear. If they crack, replace them (Dreame V10: DM-V10-SEAL article).

⚠️ Warning: If you find black traces of coal on the engine during disassembly or feel a sharp chemical smell, do not turn on the vacuum cleaner - these are signs of interturn circuit.

Frequent errors when cleaning Dreame V10 and how to avoid them

Even experienced users sometimes make mistakes that lead to breakdowns, and here are the most common ones:

• 🚿 Washing HEPA-Frequent wetting destroys the microfibers, and the filter stops trapping fine dust.
• 🔥 Drying parts on the battery or in direct sunlight, which leads to deformation of plastic and rubber seals. Optimal drying temperature — 20-25°C.
• 🔌 Connecting the vacuum cleaner to charge with wet filters. Moist air when charging can cause corrosion of battery contacts.
• 🧲 Using magnets or metal objects to clean the brushes, which damages the bearings and can disrupt the balance of the roller.

Another common problem is that you don't build properly after cleaning, for example, if you forget to put the sealing gum on the container, the vacuum cleaner will lose power because of the air sucker, and always make sure that all the parts fall into place with a characteristic click.

💡

Regular cleaning of the Dreame V10 not only prolongs its life, but also prevents the spread of bacteria and mold, which actively multiply in the moist dust inside the container.

Tips for care: how to extend the life of a vacuum cleaner

To make the Xiaomi Dreame V10 last longer, follow these guidelines:

• 📅 Keep a cleaning schedule: Keep a reminder on your phone or schedule the next cleaning date for your filters, like a cyclone filter every week, HEPA — 2-monthly.
• 🔋 Keep the vacuum cleaner correctly: Don't leave it on charging more 24 Optimal charge level for storage — 40-60%. Full discharge or permanent 100% charging reduces the battery life.
• 🧹 Use the vacuum cleaner as intended: Do not collect them construction debris (sand, plaster, metal shavings) - this quickly clogs filters and scratches plastic parts.
• 🛒 Spare filters: Buy a spare set of filters (article) DM-V10-FILTER) And you can put them in a sealed bag, and that'll quickly replace the worn parts.

If you often remove animal hair, consider buying a special turbo brush for wool (like the Dreame T30) that has a self-cleaning roller that minimizes hair winding.

FAQ: Answers to Frequent Questions