Xiaomi’s electric razor has long proven to be a reliable and technological device that ensures perfect skin smoothness. However, even the most advanced mechanism requires regular maintenance to maintain high performance. Ignoring the device’s hygiene rules leads to reduced blade sharpness and deterioration of the shaving quality over time.
Owners often wonder why the device is getting worse at bristling or making extraneous sounds. The answer lies in the accumulation of microscopic skin particles, fat and cosmetic residues inside the mesh and cutting unit. Regular cleaning is a must for maintaining the factory performance and durability of your gadget.
In this article, we will take a closer look at the care of a popular brand’s various rotary razors, what tools are needed, how often procedures are needed, and what mistakes inexperienced users make, and following the guidelines will help you avoid costly repairs or buying a new head.
Necessary tools and preparation for cleaning
Before you start to directly service the device, you need to prepare the workplace and the appropriate consumables. You will need a soft brush, which usually comes with the device, or an analogue with soft bristles to remove dry contaminants.
If your model supports wet cleaning, prepare warm water and soft liquid soap or a special spray to clean razor systems. It is important to avoid aggressive chemistry containing abrasive particles or chlorine, as they can damage the coating of the cutting blades. Use a clean lilac towel or napkin to dry.
Make sure the device is turned off and, in the case of a non-removable battery, disconnected from the charger. If the razor is heavily contaminated, it makes sense to do a primary dry brush to remove the bulk of the hair before contacting water, which will simplify the process and prevent dirt lumps from forming inside the mechanism.
☑️ Preparation for cleaning
Daily care for razor heads
Basic care of the device should become a habit after each use. Immediately after shaving, remove the protective cap and gently tap the razor handle on the edge of the sink to pour out large bristles. Then take a small brush and walk around the inner surface of the nets in circular motions, sweeping out the stuck hairs.
Special attention should be paid to the area between the blades and the body of the head, which is where most often accumulates skin fat, which when drying becomes a sticky substance that makes it difficult for the blades to slip. Mechanical brushing allows you to remove up to 80% of the contaminants without using water.
If you use a foam or shaving gel, it is recommended to rinse the heads under a stream of warm water. Direct the flow of water to the inside of the nets to wash out the foam residue. Do not use hot water, as a sharp temperature difference can adversely affect the geometry of metal mesh.
💡
After rinsing with water, be sure to remove the heads and wipe the inside of the body with a dry wipe to prevent corrosion of metal contacts.
Deep cleaning and washing of removable elements
Once a week, a more thorough hygienic procedure is recommended, which requires removing the cutting blocks. Depending on Xiaomi's model, the heads can be removed by turning counterclockwise or simply pulling out of the locking slots.
Wash the removed components under warm running water with a small amount of soft soap. Use a brush to remove plaque from the inside of the nets and the knives themselves. rinse all the details carefully, making sure that the soap solution is completely washed away, as its residue can cause skin irritation on the next shave.
If the device is not fully waterproof, you can not wash it under the tap. Rub it with a wet cloth, avoiding moisture in the area of the on button and charging port. For models with the IPX7 waterproof index, full immersion is allowed, but it is better to specify this in the instructions for the specific modification.
⚠️ Warning: Never disassemble the blades inside the metal mesh. They are calibrated in the factory with micron precision, and breaking their position will lead to poor-quality shaving and skin damage.
Can we use ultrasound?
Drying and lubrication of the mechanism
After wet cleaning, it is critical to dry all components properly before assembly. The remaining moisture inside the mechanism can lead to oxidation of contacts and rust on steel parts. Deploy the washed parts on a clean towel in a well-ventilated place at room temperature.
Do not use a hair dryer or other heating appliances to speed up the process. High temperatures can deform plastic mounting elements and disrupt the steel hardening of the blades. Natural drying takes about 1-2 hours, but ensures the geometry of the parts is safe.
After drying completely, it is recommended to apply a special lubricant to the cutting edges. Included with some Xiaomi models, there is a small oil, but you can use a universal machine oil for household appliances. A drop of oil is applied to each blade, after which you turn on a razor for 10-15 seconds for even distribution.
| Type of pollution | Cleaning method | Frequency | Required funds |
|---|---|---|---|
| The bristles' remains | Brushing and brushing | After each use | Dry brush |
| Foam/gel residue | Water washing | After each use | Warm water |
| Skin fat and plaque | Washing with soap | 1 time per week | Liquid soap, brush. |
| Contact contamination | Drinking with alcohol | 1 time per month | Isopropyl alcohol, cotton swab |
Typical errors in service
Many users make mistakes that shorten the life of the device, one of the most common being trying to knock out hair by hitting hard surfaces with a razor, which can cause microcracks in thin metal mesh that make them unusable.
Another mistake is using alcohol or acetone to wipe the plastic parts of the case. Aggressive solvents can cause the plastic to cloud or even dissolve individual components of the structure.
Also, do not leave a razor in a high-humidity bathroom on a permanent basis. Constant contact with steam and temperature changes adversely affect the battery and electronic filling. Store the device in a dry place, preferably in a protective case or stand.
⚠️ Warning: Do not try to dry the internal components with compressed air at high pressure.This can drive fine dust and hairs deeper into the engine mechanism.
When to change the cutting blocks
Even with perfect care, the cutting elements wear out over time, the metal becomes dull and the nets thinner, manufacturers recommend changing the heads every 12 months of active use, but the duration can vary depending on the stiffness of the bristles and the frequency of shaving.
There are several signs that you can tell that it's time to replace, and if the razor starts to pull the hair instead of cutting it, or if it takes much longer than before, the blades have lost their sharpness, and if the wear and tear is caused by skin irritation where it wasn't before.
When buying new components, make sure they are compatible with your model. Xiaomi releases various razor modifications, and heads from one series may not fit the other. Original spare parts provide the best shaving quality and safety.
💡
Timely replacement of cutting blocks is more important than the frequency of cleaning, since blunt blades injure the skin and make the motor work with overload.