Where to replace the screen on the smartphone Xiaomi: official services vs private workshops

Why Replacing the Screen with Xiaomi is Not Always an Easy Task

A cracked or broken screen on a Xiaomi smartphone is one of the most common breakdowns faced by brand owners. However, not everyone knows that replacing the display can cost many times more if you choose the wrong service, POCO X5 Mi 13 differ not only in size, but also in matrix type (AMOLED, IPS), It's a resolution, and even a firmware version. 12T Pro used to be used E4 AMOLED Update frequency of 120 Hz, and in budget Redmi A2 β€” simple IPS LCD. This means there is no universal solution, and an improperly selected screen can lead to sensor issues, color rendering, or even overheating of the device.

Another trap is the quality of parts, and the market is full of "original" screens from unknown manufacturers that start turning yellow, losing sensitivity, or peeling off within a month, and Xiaomi's official services often install remanufactured displays as new ones, how not to run into a fake and where you can get quality repairs, we'll discuss in this article.

Official Xiaomi service centers: pros and pitfalls

The first thing that comes to mind when you break down is to go to an authorized Xiaomi service center, and the benefits are obvious:

  • πŸ”§ Work guarantee (usually 6-12 months).
  • πŸ“‹ Use of β€œoriginal” parts (although this is not always the case – see below).
  • πŸ› οΈ Diagnosis before repair (sometimes free).

However, there are also disadvantages that consultants are silent about:

  • ⏳ Long repair times – from 3 to 14 days (during peak periods up to a month).
  • πŸ’° Overpriced: the screen replacement on Redmi Note 11 Pro will cost 12-15 thousand rubles, while in private workshops – 7-9 thousand.
  • πŸ”„ Remanufactured screens: Official centers often install remanufactured displays taken from other devices, which can lead to defects after 3-6 months.

Xiaomi Russia has an interactive map with addresses, but before visiting, be sure to check:

⚠️ Note: Some "official" centers operate under a franchise and do not have a direct contract with Xiaomi, which means that the warranty may not apply to other countries or even regions of Russia.

πŸ“Š Where you usually repair equipment?
Official service
Private workshop
Independently.
Another option

Private workshops: how to choose a reliable master

Informal services often offer lower prices and faster timeframes (sometimes screens change in 1-2 hours), but the risks are even higher, from low-quality parts to complete data loss. How do you minimize the dangers?

Criteria for choosing a workshop:

  • πŸ“Œ Reviews on Yandex.Maps/Google Maps – Pay attention to the before/after photos and comments about the warranty.
  • πŸ” Transparency of prices: good service immediately calls the cost of a spare part + work without "hidden" surcharges.
  • πŸ›‘οΈ A guarantee of at least 6 months (preferably 1 year) if it is not available or it is "conditional" - this is a reason to be wary.
  • πŸ”§ Availability of test equipment: for example, a device for checking leakage after replacement (important for models with protection) IP53, Like Xiaomi 13 Lite).

What to ask the master before repair:

  1. What kind of screen will be installed? (Please show the packaging – the original should be QR-serial-number).
  2. Will the data be saved on the phone? (Some models require unlocking the bootloader when changing the screen, which leads to a reset).
  3. Will the sensor and cameras be checked after repair? (A common problem is a broken fingerprint scanner under the screen).

β˜‘οΈ Checklist before changing the screen

Done: 0 / 5

Prices depend on the model of the smartphone, the type of matrix and the region, below are the average prices for Moscow and the regions (in rubles).

Smartphone modelScreen typeCost of the spare partCost of workTotal (private workshop)Total (official service)
Redmi Note 12 Pro+ 5GAMOLED, 120Hz8 500 – 11 0001 500 – 2 50010 000 – 13 50014 000 – 18 000
POCO X5 Pro 5GAMOLED, 120Hz7 000 – 9 5001 500 – 2 0008 500 – 11 50012 000 – 15 000
Xiaomi 13 LiteAMOLED, 120Hz12 000 – 15 0002 000 – 3 00014 000 – 18 00018 000 – 22 000
Redmi A2IPS LCD, 60 Hz2 500 – 4 0001 000 – 1 5003 500 – 5 5005 000 – 7 000
Xiaomi 12T ProAMOLED, 120Hz15 000 – 18 0002 500 – 3 50017 500 – 21 50022 000 – 26 000

Important: Prices for screens for flagships (Xiaomi 13 Ultra, Mix Fold 3) can reach 30-40,000 rubles. In such cases, it is more advisable to consider buying a new device or contact the service for a used original screen (they are sometimes offered for 50-70% of the cost of a new one).

πŸ’‘

Before changing the screen, check if your smartphone has an extended bank warranty (if you bought on credit) or insurance. Some programs cover the repair of the display even after the standard warranty expires.

Self-replacement of the screen: risks and necessary tools

If you're confident, you can try replacing the screen yourself, but it's extremely risky for models with:

  • πŸ”‹ Built-in battery (risk of damage when the plumes are disconnected).
  • πŸ“± Under-screen fingerprint scanner (requires flashing module).
  • πŸ›‘οΈ Moisture protection (IP53/IP68 β€” after disassembly, the tightness is broken).

Minimum set of tools:

  • πŸ”§ Screwdriver Set (Phillips #00, Y00, spudger).
  • πŸ”₯ Hair dryer or a station for heating glue (temperature 60-80)Β°C).
  • 🧲 Screen-take-down suction cups.
  • πŸ“¦ New screen with glue tape (recommended brands) OEM Original or Tianma).
  • πŸ”Œ Multimeter for circuit inspection.

Step-by-step instruction (briefly):

  1. Turn off the phone and remove it. SIM-map.
  2. Heat the edges of the screen with a hair dryer (don't overheat!). What happens if the screen overheats?Β°C may be damaged. OLED-matrix (broken pixels will appear) or polarization film will detach, which will lead to iridescent divorces.
  3. Carefully tuck the screen spudger-om and disconnect the plumes.
  4. Install a new screen, plug in the plumes and check the operability before final assembly.

⚠️ Note: On Xiaomi models with Snapdragon 8 Gen 2 processor (such as Xiaomi 13) after changing the screen, you may need to tether the new display through the new display. EDL-Without it, you won't have autobrightness or color reproduction, and this requires a special software (Mi Flash Pro) and an authorized service center account.

Frequent screen replacement problems and how to avoid them

Even after professional repairs, there may be problems, and here are the most common ones:

Problem.Possible causeDecision
The screen flickers or spontaneously changes brightnessIncorrectly connected plume or damaged lighting controllerReconnect the plume, check the chain multimeter
The sensor is not working (partially or completely)Damaged touch layer or not tied to the new screen in the firmwareCheck the connection, perform binding via Mi Flash
There were broken pixels or divorcesMarriage of the matrix or overheating during installationReplace the screen under warranty
The phone will not turn on after replacementShort circuit or battery damageCheck the voltage on the battery, take to the service

How do you minimize the risks?

  • πŸ“‹ Require the wizard to check the screen on the test stand before installation.
  • πŸ”„ Ask for a warranty card with a seal and indication of the screen model.
  • πŸ“± After the repair, check: Sensor performance (especially the edges of the screen); Color rendering (whether greenish/pink) Always On Display (for the screen). AMOLED).

πŸ’‘

If the phone starts to discharge faster after changing the screen, it may indicate damage to the battery plume or improper calibration of the new display.

Alternative options: used screens, insurance, trade-in

If the price of a new screen is comparable to the cost of a phone, consider the alternatives:

1. Purchase of used screen

At sites like Avito or Yula, they often sell original screens taken from their phones after other breakdowns (such as a burnt motherboard), the average price is 30-50% of the new one.

  • πŸ” Possible hidden defects (broken pixels, burnt out areas on the AMOLED).
  • πŸ“¦ No guarantee (check only in person).

2. Insurance event

If the phone is insured (for example, through Sberbank, Tinkoff or Alfasurance), screen repair can be covered by a policy.

  • πŸ“„ Is there a clause in the policy "mechanical damage".
  • πŸ’° Franchise size (sometimes cheaper to pay yourself).

3.Trade-in or discount on a new phone

Many stores (for example, Svyaznoy, M. Video) offer to hand over an old smartphone with a broken screen in a trade-in and get a discount on a new one%+ cost.

FAQ: Answers to Frequent Questions

Can I replace the screen with Xiaomi for free under warranty?
No, the warranty does not cover mechanical damage, including a broken screen, except if the crack is due to a manufacturing defect (for example, spontaneous cracking of the matrix), which is extremely rare, in which case you need to contact the official service with a check and packaging.
How long does it take to replace the screen?
In a private workshop, 1 to 3 hours (if the screen is available); in official service, 3 days to 2 weeks (depending on the load and the need to order a spare part); on models with a subscreen scanner (for example, Xiaomi 13T), it may take additional time to adjust the sensor.
Is it true that after the screen is replaced, the Face ID or fingerprint scanner stops working?
On most Xiaomi models, the underscreen fingerprint scanner requires re-binding after the display has been replaced, this is done through service software (Mi Flash Pro) and is only possible in authorized centers. Face Unlock usually continues to work, as it uses the front camera rather than the screen data.
Can you replace the entire screen instead of the glass?
Technically possible, but not feasible for most Xiaomi models. In modern smartphones, glass is glued to a matrix (OGS or On-Cell technology), and its replacement requires: Special equipment for separating layers (laser or ultrasound). Highly skilled master (risk of damaging the matrix). The cost of doing this is often comparable to replacing the entire module. The exception is the model with protective glass (for example, Redmi 9A), where it is glued separately.
What if the phone starts to warm up or discharge quickly after changing the screen?
This is a sign of improper connection of the plumes or damage to the power controller. Possible reasons: Short circuit when installing the screen; battery damage (for example, when heating with a hairdryer); Incompatibility of the new screen with the motherboard (often with cheap Chinese copies). Solution: Return to the service immediately and demand a diagnosis. If the master refuses, contact another center with a description of the problem (preferably with a photo / video malfunction).