Where is Xiaomi’s slot for SIM-maps: detailed instructions with photo

Why is it so hard to find a slot for SIM-maps in Xiaomi?

You just bought a new Xiaomi smartphone and faced the first problem: where is the slot hidden for the smartphone? SIM-Unlike old button phones, where the SIM tray was visible to the naked eye, modern gadgets hide it under lids, plugs and even under the battery. POCO X5), The problem is doubled: you have to choose between the second. SIM-microSD card.

Xiaomi Manufacturer Uses Three Main Types of Accommodation SIM-cards: 1) Classic side-facing tray (most flagships), 2 Hybrid slot under the lid (budget models), 3 Built-in battery slot (obsolete devices until 2016).

In this article, we will analyze each option with photos, videos and step-by-step instructions – so that you do not break the latch and scratch the case.

We warn you right away if your Xiaomi doesn’t recognize you. SIM-After installation, the problem may not be in the slot, but in the wrong cropping of the nanoSIM or software failure.

Type 1: Side-sided tray (90% of modern models)

This is the most common option for Xiaomi, Redmi and smartphones. POCO, issued after 2017. SIM-The map is on the left or right side of the body, and it looks like a small hole with a metal rim, and it's easy to miss unless you know where to look.

As a rule, the slot is located:

• 📱 On the left side - most flagships (Xiaomi 13, Xiaomi) 12T, Redmi K60).
• 📱 On the right side - some models POCO (POCO F5, POCO X4 GT).
• 📱 Next to the volume button – in compact devices (Redmi) 10A, Redmi 9C).

To remove the tray, you will need a paper clip or a special key (complete with your phone).

1. Turn off your smartphone (optional, but recommended)

2. Find a hole to extract the tray

3. Insert the paper clip/key before clicking

4. Carefully pull the tray over yourself

-->

⚠️ Warning: Do not use needles, toothpicks or other sharp objects - they can damage the fixing mechanism.If the tray does not come out the first time, check if you inserted the key deep enough (the click should be heard).

Type 2: Hybrid slot under the removable cover (budget models)

If you have a budget Redmi (for example, Redmi). A1, Redmi 9A) or the old Xiaomi (until 2018), then the slot for SIM-The card may be hidden under the removable back cover, in which case you have to carefully remove it — but be careful: the lid is mounted on the latches, and it is easy to break.

Algorithm of action:

1. Turn off the phone and remove the memory card (if installed).
2. Put the lid on the side with a plastic spatula (you can use a mediator or credit card).
3. Remove the cover starting at the bottom corner - there is usually the first latch.
4. Under the cover, you’ll see a nanoSIM slot (sometimes two slots) and possibly a microSD slot.

⚠️ Note: Some models (e.g. Redmi) 8A) They have a non-removable battery under the lid, and if you see a battery, don't try to remove it, just insert it. SIM-card to the slot and close the lid back.

Important: In hybrid slots (SIM2 + microSD cannot be used for both SIM-I'm going to have to pick one of these cards and a memory card at the same time.

Type 3: Slot under the battery (obsolete models until 2016)

If your Xiaomi was released before 2016 (e.g. Redmi) 3S, Redmi Note 3, Mi 4, then slot for SIM-The card can be under a removable battery, which is the most difficult case, because it requires a complete disassembly of the phone.

Step-by-step:

• 🔋 Turn off the phone and remove the back cover (as described in the previous section).
• 🔋 Remove the battery by pulling a special pen film (if it is not, gently tuck the battery with a plastic spatula).
• 🔋 Under the battery, you’ll see two slots: one for microSIM, the other for nanoSIM or microSD.
• 🔋 Put it in. SIM-Map contacts down and collect the phone in reverse order.

Xiaomi 13/13 Pro/13 Lite

Redmi Note 12/11/10 series

POCO F5/F4/X5

Redmi A1/9A/8A (budget model)

Other model (specify in the comments)

-->

⚠️ Warning: If the phone doesn't turn on after assembly, check if the battery is installed correctly. Battery contacts should fit tightly to the connector on the board. If the problem persists, you may have damaged the plume during disassembly.

How to insert it correctly SIM-Map in Xiaomi: Step-by-step

Even if you find a slot, the installation is wrong. SIM-This card may cause damage or the network to be missing:

1. Turn off your phone (optional, but recommended for safety).
2. Get the tray for you. SIM-maps (as described above).
3. Place the tray on a flat surface with contacts upwards.
4. Place the nanoSIM in the appropriate slot: 📌 The sloping corner of the map coincides with the angle on the tray. 📌 Contacts SIM-The cards look down (to the tray body).

Carefully insert the tray back before the click.

💡

If SIM-The card doesn't come in the tray, don't try to force it, it's probably not cut properly. Use a stamped nanoSIM from the operator or trim it with a special stapler (stands). ~200 rubles).

After turning on the phone, check the network:

1. Open the Settings. → SIM-maps and mobile networks.
2. Make sure that SIM-The card is determined (the name of the operator should be displayed).
3. If the network is not available, restart the phone or check if the card is installed correctly.

What to do if Xiaomi doesn’t see it SIM-map?

After installation SIM-The phone does not recognize the card, the reasons may be as follows:

• 🔄 Wrong pruning SIM-Cards (frequent problem with self-pruning microSIM to nanoSIM).
• 🔄 Contamination of contacts (dust, oxidation, greasy traces).
• 🔄 Software failure (for example, after updating) MIUI).
• 🔄 Hardware malfunction (damaged slot or antenna module).

First, try simple solutions:

• 🔧 Remove and insert. SIM-map.
• 🔧 Wipe the contacts of the card and tray with an alcohol tampon.
• 🔧 Reboot the phone.
• 🔧 Check it out. SIM-card in another phone (to prevent its malfunction).

💡

If SIM-The card works on another phone, but is not determined by Xiaomi - the problem is in the slot or firmware. If it does not work anywhere, contact the operator for a replacement.

If nothing helps, try resetting your network settings:

1. Go to Settings → Memory and backups → Reset settings.
2. Select Network Reset (don’t reset all settings!).
3. After restarting, check the network again.

If that didn't work, you might need to flash or repair. SIM-Cards cost from 300 to 800 rubles.

Frequent mistakes when working with SIM-map

Even experienced users sometimes make mistakes that lead to slot failure or loss of communication.

• 🚫 Using a non-standard tool (needle, knife, fork) to extract the tray → latch-break.
• 🚫 Installation SIM-up-foot" → contact-scratch.
• 🚫 Use of force in removal of the lid → hull-crack.
• 🚫 Using microSIM without an adapter in a nanoSIM slot → slinging.

⚠️ Note: If after a failed installation SIM-The phone stopped turning on or gives an error "SIM-There is no card even with another card, do not try to repair it yourself. There is a risk of damage to the motherboard, and then the repair will cost 3,000-10,000 rubles.

Another common problem is that the moisture gets into the slot, and if the phone falls into water or is in a wet room, the contacts can oxidize.

1. Extract. SIM-card.
2. Dry the slot with a hairdryer at a minimum power (1-2 minutes).
3. Wipe the contacts with a cotton swab soaked in alcohol.
4. Let the phone lie in a dry place for 12-24 hours before re-installation SIM-map.

FAQ: Answers to Frequent Questions