Where to look for a speaker from Xiaomi: location in smartphones, TVs and smart devices

You bought a Xiaomi smartphone, but the sound seems quieter than you expected? Or you plan to clean the device but are afraid to damage the acoustic system? In this article, we will analyze exactly where the speakers are located in different Xiaomi models – from the budget Redmi to the flagship Mi and POCO, as well as in Mi TVs.

The manufacturer often changes the design of the speakers depending on the series: somewhere they are hidden under the grille on the end, somewhere integrated into the screen, and in some models there are two (stereo sound). 2026 year, including hidden speakers for conversations and multimedia, as well as nuances for devices with protection IP53/IP68.

Important: the speaker's location affects not only the volume, but also the sound quality when listening to music or watching videos. If you notice that the sound has gotten worse, maybe the speaker's holes have been clogged with dust or damaged, then you will learn how to find them and clean them safely.

Types of speakers in Xiaomi devices: how they differ

Xiaomi’s smartphones and smart appliances use three main types of speakers, each of which performs its own function:

• 📞 Speaker (top, auditory) - responsible for the voice of the interlocutor during calls, usually hidden under the grid at the top of the screen or in the frame of the case.
• 🎵 Multimedia speaker (bottom) - plays music, sounds in games and videos, most often located on the lower end next to the connector USB-C.
• 🔊 Stereodynamics – a pair of speakers (upper) + The bottom one is for surround sound, found in flagship models, such as the Xiaomi 14 Ultra or POCO F6 Pro.

In Mi TVs and Xiaomi sound panels, speakers can be:

• 📺 Frontal - under the screen (in models with a thin frame).
• 🔈 Back - on the back of the case (most often in budget TVs).
• 🎧 External – in a separate soundbar (for example, Xiaomi Soundbar).

Note that in some smartphone models (e.g. Redmi Note 13 Pro+), the top speaker can be virtual – sound is transmitted through the screen speaker – a technology solution that saves space but requires careful handling of the display.

Where is the speaker in Xiaomi smartphones: according to models

The location of the speakers depends on the series and year of release of the device, and below we have collected data for the popular Xiaomi, Redmi and POCO lines (relevant to the models of 2022-2026).

In IP53/IP68 models (such as the Redmi Note 13 Pro+ or Xiaomi 14), the speakers are further closed with a membrane from dust and moisture.

⚠️ Attention: If after the fall of the smartphone lost sound in the speaker, do not try to disassemble the device yourself. IP68 a breach of tightness will lead to loss of water protection!

Make sure the sound is not turned off in the settings (Settings → Sound)

Test both speakers using ##36446337## (engineering menu)

Call the device - check the conversational speaker

Turn on music at maximum volume - check the multimedia

-->

How to find a speaker in Mi TVs

In Xiaomi TVs, the speaker layout varies by series and diagonal; in budget models (such as the Mi TV A2 32), they are usually hidden behind, and in premium ones (such as the Mi TV Q2 75), they are brought forward for better sound.

General rules:

• 📏 In TVs with a diagonal of up to 43" speakers are most often located on the back side at the bottom (under the bracket mount).
• 📺 In models from 50" and above, the speakers can be frontal - under the screen, closed with a fabric or plastic grille.
• 🔊 In Mi TV QLED and OLED built-in subwoofers are used - their holes are on the back panel on the right.

To determine the exact location:

1. Look at the bottom of the screen – if there is a perforation or grid, the speakers are front-facing.
2. Turn over the TV and look at the back panel – speakers can be indicated by round or oval grilles.
3. Look at the instructions for the model – in the section “Technical characteristics” there is usually a diagram.

⚠️ Attention: On Mi TVs TV P1 and Q1 If you're taking TV off the table, don't pull the bottom of the table, you can damage the speaker system!

Why Xiaomi’s speaker doesn’t work: Common reasons

If the speaker in your Xiaomi stopped working or the sound became quiet, the problem can be both software and hardware.

• 🔇 Software failure - after the update MIUI Solution: Reset the sound settings to Settings. → System system → Resetting settings → Reset the sound settings.
• 🧹 Dust clogging is especially important for the bottom speaker, so you can clean it with a soft brush or compressed air.
• 💧 The swelling of water, even in devices with IP68 Solution: Dry the device in rice or silica gel for 24 to 48 hours.
• 🔌 Train damage after falling or disassembling. Solution: diagnostics at the service center.
• 🔊 Membrane wear — over time, the speakers get tired and sound worse. Solution: Replace the speaker (average costs 800 to 2000) ₽).

If the problem occurred after the MIUI update, try to roll back to the previous firmware version via Fastboot:

fastboot flash system system.img


fastboot reboot

Important: Before any manipulation with the firmware, make a backup of data through Settings → Additional → Backup!

💡

To check if the speaker is physically working, hold your ear to its grille and call the phone from another device. If you hear a weak sound, there's a problem with the settings or firmware, if there's silence, the speaker itself is faulty.

How to clean the speaker in Xiaomi without disassembly

If the speaker is clogged with dust or dirt, you can clean it yourself without disassembling the device, and the main rule is not to use wet wipes, alcohol or sharp objects!

Step-by-step:

1. Turn off your smartphone and get it out. SIM-card (if the speaker is near the tray).
2. Take a soft toothbrush (new!) or a paintbrush with a short pile.
3. Carefully walk along the speaker grid along the fibers (not across!).
4. To remove deep dust, use a can of compressed air (keep 10 cm away!).
5. If the dirt is sticky, lightly moisten the cotton swab in distilled water and wet the grille (don't rub!).

For Mi TVs:

• 🧽 Use a vacuum cleaner with a narrow nozzle at minimum power.
• 🧴 To remove greasy spots from the front speakers, a microfibre wipe moistened in a soapy solution is suitable (after that, wipe dry!).

⚠️ Warning: Never blow into the speaker with your mouth - saliva can get inside and cause membrane corrosion! also avoid vacuum vacuum cleaners with high suction power - they can damage the thin mesh.

💡

If the sound hasn't improved after cleaning, it could be in the speaker membrane or the plume, and only professional diagnostics will help.

Hidden speakers in smart devices Xiaomi

In addition to smartphones and TVs, speakers are in another Xiaomi technique:

• 🎧 Headphones and TWS (For example, Xiaomi Buds 4 Pro: speakers are hidden inside the cases, but their grilles can be cleaned with a cotton swab with isopropyl alcohol (no more than 70%).
• 📻 Xiaomi Smart Speaker: speakers are placed on the front panel under a fabric coating. Cleaned with a dry brush.
• 🏠 Xiaomi Robot Vacuum: The speaker for voice alerts is under the top cover (available after removing the dust collector).
• ⌚ Xiaomi Watch 2 Pro: Miniature speaker for calls hidden in case next to microphone.

The Xiaomi Mi Band 8 and other fitness bracelets don't have speakers — sound is transmitted through vibration, but in Xiaomi Smart Glasses, speakers are built into the arcs and point directly into the ears.

If you're disassembling a smart speaker cleaning device, be sure to disconnect it from the network and get the battery out (if possible). Speakers and robot vacuum cleaners often use capacitors that can store charge!

Frequent questions about the speakers in Xiaomi