Where is the speaker at Xiaomi TVs: location, inspection and repair

Did you buy a Xiaomi TV but the sound was gone or quiet? Or just want to figure out where the speakers are hidden in the case so as not to damage them when cleaning or rearranging? In this article, we will detail where the speakers in popular Xiaomi models are located. TV, How to check them and what to do if they don’t work.

The manufacturer does not always specify the exact diagrams in the documentation, and the design of TVs can be very different from ultra-thin Mi. TV Q1 to the massive Mi TV We have collected up-to-date information on all lines (including Mi). TV 4S, Mi TV 5, Mi TV P1 And others, added photos of the speaker layout and diagnostic instructions, and you'll also learn how to avoid typical disassembly errors and why sometimes the problem isn't with the speakers themselves, but with settings or connections.

Why it is important to know the location of speakers in Xiaomi TV

Knowing the exact location of acoustic components will help in several situations:

• 🔧 Repair or replacement – if the speaker cracks or doesn’t make sound, you should first find it to check the contacts or replace it.
• 🧹 Dust cleaning -- the accumulation of dirt on the speaker grilles makes the sound worse, but cleaning them with a cotton swab without knowing the design is dangerous!
• 🔊 External acoustics connection – some models have subwoofer or sound bar outputs located next to speakers.
• 📦 Transportation – speakers are often attached to the back panel and are easily damaged when transported carelessly.

In addition, in some Xiaomi models, the speakers are integrated into the lower part of the body (for example, in the Mi). TV Q1 75), and in others evenly distributed on the sides (as in Mi). TV 4A). This affects the sound quality and direction, and if you're planning to hang a TV on the wall, the location of the speakers will determine whether you need to buy additional mounts to improve the acoustics.

Typical layout of speakers in Xiaomi TV

The manufacturer uses three basic layouts for the distribution of acoustic systems in its televisions, which depend on the model series, screen diagonal and year of release.

In models with a diagonal of 65" and above (for example, Mi TV Q1 75") often use additional passive emitters to amplify basses that are visually indistinguishable from the main speakers. Their arrangement is usually symmetrical - if you find one speaker on the left side, the second will be mirrored from the right side.

To determine exactly where the speakers are in your model, follow the following steps:

1. Turn off the TV.
2. Carefully place it down on a soft surface (such as a blanket).
3. Inspect the back panel – speakers are usually closed with plastic or fabric grilles with small holes.
4. If there are no bars, look for round or oval depressions on the sides of the case.

💡

In some models (e.g., Mi). TV 5X) The speakers are hidden under the removable bottom panel, so to remove it, carefully attach the latches with a plastic map, starting from the corners.

How to check the performance of speakers without disassembly

Before you disassemble the TV, make sure that the speaker is the problem, and often the sound is lost due to incorrect settings or software failure.

1. Check Volume: Press the Volume button + If the volume indicator on the screen reacts, but there is no sound, the problem is the speaker or the amplifier.
2. Switch the sound source: Connect an external device to the TV (for example, a smartphone on the TV). HDMI ARC If you have a sound, the speakers are malfunctioning. TV.
3. Reset the sound settings: Go to Settings → Sound. → Resetting the sound settings, which will return the factory equalizer parameters.
4. Update the firmware: In the Settings menu → On TV. → Update software, check the current version. Sometimes the sound disappears after the update fails.

If there is still no sound after these steps, try the test speaker mode:

Press the remote sequentially:


Menu → Settings → All Settings → Device Preferences → Sound → Speaker Test

The TV will play the sound through each speaker in turn, and if one of them is silent, the problem is in the speaker (either in the wires or in the device itself).

Step-by-step: how to get to the speakers in Xiaomi TV

If the diagnostics show that the speakers are malfunctioning, they should be examined visually. Disassembly of the TV requires caution - incorrect actions can damage the plumes or the screen.

Then proceed according to the model:

For models with speakers on the back panel (Mi) TV P1, Mi TV 4A):

1. Remove the stand (if installed) by unscrewing 4 screws.
2. Unscrew all the screws on the back cover (usually 8-12 pieces).
3. Carefully apply the lid with a plastic card starting at the top corner. Be careful - there may be latches inside!
4. The speakers will be centered or closer to the bottom, mounted on 2-4 screws and plugged into the motherboard.

For models with side speakers (Mi) TV 5, Mi TV Q1):

1. Remove the back cover (as described above).
2. Pay attention to the plastic grilles on the sides - they can be glued or fixed with latches.
3. The speakers are usually hidden behind these bars, and to remove them, carefully pull the bars over yourself (sometimes you need to screwdriver).
4. Check the integrity of the wires running from the speakers to the amplifier board.

Attention! ⚠️ In some models (e.g., Mi). TV Q2 75") speakers are glued to the body with double-sided tape. Don't pull them by force - first warm up the place of attachment with a hairdryer (temperature not higher than 60).°C) to soften the glue.

💡

If the speaker is externally intact but not working, the problem may be in the amplifier (often it is a chip). TAS57xx Replacing it requires soldering skills and trusting the service center better.

Typical malfunctions of Xiaomi speakers TV and eliminate

In 80 percent of cases, Xiaomi TVs have five causes for their sound problems, and we put them together in a table of solutions.

If you're not sure about your skills, don't take risks, go to a service center, like replacing the sound amplifier with the Mi. TV Q1 requires a soldering station and experience with SMD-In official Xiaomi services, the cost of such repairs starts from 3,500 ₽.

Attention! ⚠️ Some "masters" offer "repair" speakers by pouring glue or sealant into them to eliminate cod. This is unacceptable - such a "repair" will permanently disable the speaker and make it impossible to replace it.

How to Improve Sound in Xiaomi TV speakerless

If the speakers are working but the sound doesn’t suit you, there are several ways to improve the acoustics without buying an external sound system:

• 🎛️ Equalizer settings: Go to Settings → Sound. → Equalizer and increase the frequencies of 100-200 Hz for bass, 2-5 kHz for vocals. In models with Dolby Audio, select Movie or Music mode.
• 🔄 Change in direction of sound: If the speakers are located behind (as in Mi). TV P1), Hang the TV on the wall with a gap of 5-10 cm – this will improve the reflection of sound.
• 📦 Adding acoustic panels: Buy cheap foam panels for studio sound insulation and place them behind the TV, which will reduce echoes and improve clarity.
• 🔌 Use of the HDMI ARC: Connect through HDMI ARC So this will allow you to use the TV speakers as part of a multi-channel system.

For models with Dolby Atmos support (e.g. Mi). TV Q2) Turn this feature on in the audio settings. It creates surround sound even on the built-in speakers, but requires content with the appropriate audio track (available on Netflix, Disney).+ and some YouTube movies).

Frequent errors in the search and repair of speakers

Even experienced users sometimes make mistakes that make the problem worse.

• 🔨 Using metal tools to remove grilles - this scratches the body and can damage the speakers.
• 💧 Clean the speakers with a wet fabric - water will get on the coil and cause a short circuit.
• 🔥 Overheat the soldering iron during repair - temperatures above 300°C will damage the amplifier board.
• 🔌 Connect external speakers without grounding – this can cause interference or electric shock.
• 📦 Store the TV in a horizontal position with the screen down – speakers can deform under the weight of the matrix.

Another common mistake is to ignore the warranty, so if your TV is warranty-free, don't disassemble it yourself! Opening the case will void the warranty.

1. Take a photo or video of a problem (such as a lack of sound).
2. Contact the official Xiaomi service with a check and a warranty card.
3. If you refuse to accept under warranty, request a written refusal with justification.

In Russia and CIS countries, there are consumer protection laws, according to which the manufacturer is obliged to eliminate a factory defect within a warranty period (usually 1-2 years), speakers are among the main components of the TV, and their malfunction cannot be considered a “non-warranty case” without examination.

FAQ: Answers to Frequent Questions About Xiaomi Speakers TV