If you own a Xiaomi Redmi smartphone and have ever wondered about its performance, you’ve probably come across the term Antutu. This benchmark has become the de facto standard for assessing the hardware of Android devices, but not everyone understands what it measures, how to interpret the results correctly, and why the performance can differ even on the same models. In this article, we’ll look at what AnTuTu Benchmark is in the context of the Redmi line, how it works under the hood, and what to do if your smartphone shows low scores.
The peculiarity of Antutu tests is that they assess not only the “bare” power of the processor, but also the complex performance of the system: from the speed of reading / writing memory to the effectiveness of rendering graphics in games. For Xiaomi Redmi, a brand known for price/quality ratio, Antutu’s results are often a key argument when choosing a model. However, many users do not know that Xiaomi artificially understates the performance in benchmarks on some firmware. MIUI through the mechanism of “thermal throttling” (restriction due to overheating), which can distort the real capabilities of the device.
What is Antuta and why you need it in Xiaomi Redmi
AnTuTu Benchmark is an Android device performance testing app developed by Chinese company AnTuTu. It evaluates the smartphone in five key areas:
- 🔹 CPU — processing power of the processor (single-core and multi-core tasks).
- 🎮 GPU — performance of the graphics accelerator (rendering) 2D/3D, game).
- 📱 UX (User Experience – Interface speed and system responsiveness.
- 💾 MEM (Memory – the speed of RAM and permanent memory (RAM + ROM).
- 🔋 Thermal – Heat management (heating) during loading.
For Xiaomi Redmi owners, Antututu is important for several reasons:
- Comparison with competitors: for example, Redmi Note 12 Pro+ Dimensity 1080 in Antuta dials ~500,000 points, which allows you to objectively compare it with the Samsung Galaxy A54 (Exynos 1380, ~450,000 points).
- Diagnosis of hardware: a drop in points can signal battery degradation, overheating or firmware problems.
- Optimization: After cleaning the cache or changing the firmware, you can track the performance increase.
It's important to understand that Antutu is not showing real speed in everyday tasks -- it's modeling extreme loads. 10 type 200 000 But if you're not a good judge, it doesn't mean it's going to slow down in messengers. 20-30% Below the average for the model – a reason to check the device.
How to run the test Antututu on Xiaomi Redmi: step-by-step instructions
It is easy to test on a Xiaomi Redmi smartphone, but there are nuances that affect the accuracy of the results.
- Download the official appendix: 📱 Install AnTuTu Benchmark from Google Play (for global firmware) MIUI). 🌐 For Chinese firmware download APK from the official website (version) 9.x or 10.x).
Preparation of the device
☑️ Preparation for the Antoutou test
Test run
Open the app, press. START TEST Wait until the end (usually) 3-5 Do not interact with your phone during testing!
Preservation of results
Once you're done, you'll see the overall score and details for each section. SAVE, To save a screenshot or export data.
⚠️ Note: Some Redmi models (e.g. Redmi Note 11 Pro) MIUI It can block the maximum performance in benchmarks. To get honest results, just use the engineering menu to tell you what to do:
adb shell settings put global cpu_perf_mode 1This will disable the 1 session limit (required) ADB and the debugging on USB).
How to interpret the results of the Antututu for Xiaomi Redmi
Antoutou's score is the sum of points in all five categories, but it's more important to analyze individual metrics to understand the device's bottlenecks. Below is a table of approximate values for popular Redmi models (2023-2026):
| Model | Processor | Overall score | CPU | GPU | UX | MEM |
|---|---|---|---|---|---|---|
| Redmi Note 12 Pro+ 5G | Dimensity 1080 | ~500 000 | 150 000 | 180 000 | 80 000 | 90 000 |
| Redmi Note 11 Pro+ 5G | Dimensity 920 | ~420 000 | 130 000 | 150 000 | 70 000 | 70 000 |
| Redmi 10 2022 | Helio G88 | ~220 000 | 80 000 | 45 000 | 50 000 | 45 000 |
| Redmi K60 Pro | Snapdragon 8 Gen 2 | ~1 300 000 | 250 000 | 450 000 | 120 000 | 180 000 |
What are the deviations from the average values:
- 🔥 GPU below-normal → Problems with graphics drivers or overheating (chip) Adreno/Mali trottill).
- 🐢 UX below 50% of the maximum → The system is loaded with background processes or uses a slow eMMC memory instead of a UFS.
- 🔋 Thermal score < 70% → The battery has degraded or the heat paste has dried up (relevant to the old Redmi Note) 8/9).
⚠️ Note: If your Redmi is 30% below the tabular, it may be due to the fact that you are not:
Active Energy Saving Mode (Settings) → Battery → Performance mode) Installed custom firmware (e.g. LineageOS without MediaTek optimizations) Physical wear (e.g., bloated battery presses on motherboard).
💡
Antoutou's score is not a sentence, but a diagnostic tool. Even with low scores, a smartphone can work consistently in everyday tasks, unless there are critical drawdowns in individual tests (for example, for example, a smartphone can work consistently in everyday tasks, GPU or MEM).
Top.-5 Reasons for low scores in Antututu on Xiaomi Redmi
If your Redmi is performing worse than expected, check out these common problems:
- Trottling due to overheating: Xiaomi aggressively limits performance when heated above 45°C. Check the temperature through the app CPU-Z during the test. CPU/GPU heat up 60°C+, Clean the device from dust or replace the heat paste.
- Background processes: MIUI It is known for “gluttonous” services like com.miui.analytics or com.xiaomi.midrop. Before the test, disable the autoload of unnecessary applications through Settings. → Annexes → Auto-start.
- Outdated Firmware: In Older Versions MIUI (Below 14) there may have been bugs with processor frequency control. → The phone. → Updating the system.
- Memory problems: If scores are MEM Low, check the health of the drive team in ADB: adb shell dumpsys devicestoragemonitor Look for lines with health - status BAD flash-memory wear.
- Manufacturer restrictions: Why Xiaomi is understating results in benchmarks? MIUI 12, Xiaomi has implemented a “Performance Mode” mechanism that artificially limits performance in benchmarks (including Antouta) to reduce chip wear. 10-15%. The restriction can only be removed through ADB ortho-core.
How to increase points in Antututu on Xiaomi Redmi: working ways
If you want to maximize performance in a test (for example, for selling a device or comparing), use these methods.
- ⚡ Trottling Disabled: For Snapdragon processors, use the Magisk Disable Flag Secure module. mtk_throttle_disable.
- ❄️ Refrigeration: Place your smartphone in the refrigerator 10 minutes before the test (not lower than 0°C!) or use a cooling stand. +5-10% resultively.
- 🔧 Firmware optimization: Install a custom core like FrancoKernel or Pixel Experience firmware – they are often better optimized for benchmarks.
- 🚀 Overclocking (for experienced only): How to overclock the processor on MediaTek (at your own risk) For Dimensity chips (for example, in the Redmi Note 12 Pro+) You can change frequencies via the engineering menu (#36446337##), but this requires root rights and can cause overheating").
⚠️ Warning: Overclocking and disabling the trottling reduce the life of the processor and can lead to:
Overheating over 80°C (chip detachment risk) Accelerated battery degradation (at acceleration) GPU). Loss of warranty (if traces of root rights are found).
💡
If you need a high score Antout to sell your phone, just clear the cache (Settings) → Memory. → Clear the cache, disable background applications and test at body temperature 25-30°C. This will give an honest maximum without risk to iron.
Comparison of Antututu with other benchmarks: what is better for Xiaomi Redmi
AnTuTu is not the only tool to test, and in some cases, other benchmarks give a more accurate picture:
| benchmark | What's testing | Pluses | Cons | Recommendation for Redmi |
|---|---|---|---|---|
| Geekbench 6 | CPU (single-core), GPU (OpenCL/Vulkan) | Accurate data on the processor, cross-platform | Not testing memory and UX | 🔹 For comparison of net power CPU |
| 3DMark | Graphics (Sling Shot, Wild Life) | Realistic play scenes | Not a good estimate. CPU memory | 🔹 For gamers (e.g. Redmi) K60) |
| PCMark | Performance in real-world tasks (photo editing, web surfing) | Shows real responsiveness | Long tests (20)+ minute) | 🔹 To assess daily work |
| AIDA64 | Detailed information about iron + memory | Shows temperature, frequency, chip patterns | A complex interface | 🔹 To diagnose problems |
Xiaomi Redmi is the best strategy for the company:
- Use the antoute for general comparison with other models.
- Run Geekbench if you are interested in processor performance (for example, for emulators).
- Run away. 3DMark, If you play heavy games (Genshin Impact, Call of Duty Mobile).
- Check it out. AIDA64, If you suspect hardware problems (such as trottling due to battery).
Myths about Antututu: what not to do on Xiaomi Redmi
There are many myths around benchmarks that can harm your Redmi.
- 🔄 «You need to warm up your phone before the test: This is only true for older smartphones with eMMC memory (for example, Redmi). 7A). Modern Redmi with UFS 2.2/3.1 They do not require warm-up - it will only increase the trottling.
- ⚡ «The higher the scores, the better the smartphone: Redmi Note 12 with Snapdragon 4 Gen 1 (350,000 points) in real-world tasks may be faster than Redmi 10X Dimensity 820 (400,000 points) for better optimization MIUI.
- 🧊 «Liquid nitrogen cooling will give record scores": Extreme cooling (below) -10°C) leads to condensation on the board and short circuit. Maximum - cooling stand with fans.
- 🔋 «Antouto drains battery": One test consumes ~2-3% But if you run a benchmark in a cycle, the battery wears out faster because of the high discharge currents.
⚠️ Note: Some “optimizers” from Google Play (e.g. Game Booster or Google Play) CPU Tuner) promised to increase the scores of Antututu, but in fact:
They often contain malicious code (according to Kaspersky Lab, 1 in 5 of these applications are fake), and the effect of them is temporary and is achieved by aggressively closing the background processes, which leads to the loss of notifications.