What to do if the body of Xiaomi Redmi bent 9C: causes and solutions

If you have a Xiaomi Redmi 9C And suddenly it started to bend, and the body deformed so that it's visible to the naked eye -- don't panic, and this is a problem that's more common than it seems, and in most cases, it can be solved without completely replacing the device. From the subtle bending of the back cover to the apparent sagging of the screen when pressed, in this article we will examine all possible causes, from factory defects to mechanical damage, and give step-by-step instructions on how to fix the situation yourself or with the help of a service center.

It is important to understand that Redmi 9C — It's a budget smartphone with a plastic body, which is more susceptible to deformation than metal or glass models, but even in such cases, expensive repairs are not always required. We'll tell you how to diagnose a problem, what to do first, and when to get to the professionals, and we'll also share the secrets of prevention so that your phone doesn't bend again.

Why Xiaomi Redmi's body bends 9C: root-leading

The deformation of the body rarely occurs on its own — usually preceded by specific factors. 9C may bend:

• 🔥 Battery overheating: Lithium-ion batteries heat up when you work hard (gaming, charging, multitasking), which can lead to expansion of the case. Especially dangerous if the phone is lying on a charge for a long time or used at high temperatures.
• 💥 Mechanical impact: Hitting, falling, or even high pressure (for example, if the phone was in the back pocket and sat on it) can cause the plastic case to bend.
• 🏭 Factory defects: In rare cases, the deformation is due to poor assembly or defective materials, most often immediately after purchase.
• 🔋 Battery bloating. If the battery starts to puff up, it physically pushes the back cover, causing it to bend out, and that's one of the most dangerous things that you can do, and you need to intervene immediately!
• ⚡ Incorrect charging: Using unoriginal chargers or cables can cause overheating, which over time deforms the body.

The easiest way to check if the deformation is battery-related is to place the phone on a flat surface (like a table) with the screen up. If the back cover is playing when pressed or there is a gap between the case and the table, it is a sign of battery bloating. If the bending is uniform and not accompanied by other symptoms (such as spontaneous shutdown), the most likely problem is mechanical damage.

⚠️ Warning: If the body is not just bent, and on the back cover there are cracks or bloating - do not try to disassemble the phone yourself!

Cameras|Charging connector|Back cover center|Screen.|I don't know.-->

How to self-diagnose the deformity

Before you take action, you need to determine exactly the nature of the deformation. Here is a step-by-step instruction on how to do this:

1. Visual inspection. Light up the flashlight along the body, which is the way you see the bumps. Notice the junctions between the screen and the frame: if there are gaps, it's a sign of bending.
2. Place your phone on a glass or a smooth table, and if it's swinging, or if you see light between the body and the surface, the body is deformed.
3. Check buttons: Press the volume and power buttons: if they are drowned or protrude more than usual, this may indicate internal pressure (for example, from a bloated battery).
4. Screen test. Swipe your finger across the display, and if it flexes when you press it, or if it waves, it's a serious problem, maybe it's damaged the substrate.

If the deformity is minimal (for example, a barely noticeable bend of the back cover), you can try to eliminate it with your own hands, but if the phone does not turn on, warms up or makes extraneous sounds when you press the case, this is an excuse to immediately take it to the service.

Turn off the phone from charging

Make a backup copy of the data

Prepare a plastic spatula and screwdriver

Wear an antistatic bracelet (if any)

Working on a clean, illuminated surface-->

What to do if the body bent due to a bloated battery

Battery bloating is the most dangerous cause of deformation.If you notice that the back cover is Redmi. 9C bent, and the phone began to discharge faster or spontaneously turn off, act on the following algorithm:

• ⚡ Turn off your phone immediately and don't turn it on until you've replaced the battery!
• 🔌 Don't plug in to charge. Charging can make the problem worse.
• 📦 Extract. SIM-card and memory card if the phone is still on.
• 🔧 Contact the service center. Replace the battery in Redmi. 9C It will cost 1,500-3,000 rubles (depending on the region), and it is possible to replace it on your own, but it requires experience.

If you are replacing the battery yourself, you will need:

• New battery (original or high-quality analogue, for example, from Remax or Baseus).
• A set of screwdrivers (cross and flat).
• Plastic blade or mediator for disassembling the body.
• Thermoclei or bilateral tape to fix the new battery.

Replacement process:

1. Remove the back cover (it is kept on latches, carefully plow the shoulder blade around the perimeter).
2. Disconnect the battery plume from the motherboard.
3. Remove the old battery (it can be glued – use a heat dryer or isopropyl alcohol to soften the glue).
4. Install a new battery, plug in the plume and assemble the phone.

⚠️ If during the analysis you saw that the battery is very inflated (more than 2-3 mm), do not try to puncture or compress it - this can lead to fire.

How to straighten the Xiaomi Redmi body 9C hand-handed

If the deformation is not connected to the battery and is mechanical (for example, the phone bent after a fall or pressure), you can try straightening the case yourself. This method is only suitable for plastic cases - metal or glass cases can not be restored.

You'll need:

• 🔥 Hair dryer (construction or regular for hair).
• 📏 A straight, heavy book or press (for example, a stack of magazines).
• 🧻 Soft fabric (so as not to scratch the body).
• 🛠️ Plastic card or shoulder blade (to adjust bending).

Step-by-step:

1. Heat the deformed area with a hair dryer at an average temperature (not higher than 60-70).°C), holding it at a distance of 10-15 cm. the Plastic should become soft, but not melted.
2. Place the phone between layers of fabric on a flat surface (e.g., on a table).
3. Place a heavy book or a press on top and leave it for 10 to 15 minutes.
4. If the bending remains, repeat the procedure with a little pressure on the problem area with a plastic card.
5. Let the phone cool for an hour before use.

This method works 70-80% of the time if the deformation is not critical, but remember: heating can damage the internal components, so don't overheat the phone or hold the hair dryer too close.

💡

If the body is still slightly bent after straightening, try sticking a hard case or bumper on the back cover, which will add stiffness and prevent re-deformation.

When to contact the service center: signs of serious problems

Not all cases of deformity can be corrected at home, there are a number of signs for which you should definitely consult a specialist:

• 🔋 Battery will rise by more than 3 mm - this is a security threat.
• 💻 The phone doesn't turn on or spontaneously shuts off - possibly damaged motherboard.
• 📱 The screen cracked or appeared "waves" when pressed - this is a sign of detachment of the display.
• 🔌 Charging or connectors are not working – the deformation could damage the contacts.
• 🔊 Extraneous sounds (squeaking, crunch) appeared - this may indicate damage to internal components.

In the Xiaomi service center or authorized workshops you will be offered:

• Diagnosis (usually free or for 300-500 rubles).
• Replacement of the battery (1 500-3 000 rubles).
• Straightening of the body with the help of professional equipment (1000-2500 rubles).
• Replacement of the back cover (800-2000 rubles).
• Complete dismantling and inspection of internal components (from 2 000 rubles).

The cost of repairs depends on the region and the degree of damage. In Moscow and St. Petersburg, prices are higher than in small cities. If the phone is warranty, contact the official service Xiaomi - perhaps the defect is recognized as a warranty case (especially if it is a factory defect).

⚠️ Note: If you are using an informal service, make sure that the wizard is using original parts. Cheap counterparts can quickly fail or exacerbate the problem.

How to prevent deformation of the body in the future

To your Xiaomi Redmi 9C Don’t bend anymore, follow these guidelines:

• 🔋 Use the original charger. Poor charging overheats the battery.
• 📱 Avoid overheating. Do not leave your phone in direct sunlight or on heaters.
• 🛡️ Wear your phone in a case. A hard bumper will protect you from shocks and pressure.
• 🚫 Don’t put your phone in your back pocket – squats or pressure can warp the body.
• 🔄 Don't let the battery run out. Charge your phone regularly to extend the battery life.
• 💧 Avoid moisture. Water can cause corrosion, which weakens the structure of the body.

It is also worth periodically checking the status of the battery.

1. Enter the code ##4636## in the phone application.
2. Go to the section Information about the battery.
3. Check your health setting, and if it's below 80 percent, it's time to change the battery.

If you’re actively using your phone for gaming or multitasking, consider buying an external battery (powerbank) that will reduce the load on the built-in battery and reduce the risk of bloating.

Frequent mistakes when trying to fix a bent body

Many users are trying to straighten out Redmi 9C They make mistakes on their own that only make the problem worse:

• 🔥 Heat the body with an open fire (lighter, stove) that melts the plastic and damages the internal components.
• 🔨 Hitting the phone with a hammer or other heavy objects will cause cracks or breakage of the screen.
• 💦 Watering the case with boiling water in an attempt to soften the plastic, water will get inside and knock the phone out of order.
• 🔋 Continue to use a phone with a bloated battery, the risk of fire outweighs any savings.
• 🛠️ Disassemble a phone without special tools. Plastic latches are easy to break, and without experience, you can damage the plumes.

If you're not sure about your abilities, you should contact the service. For example, replacing the battery in an informal workshop can be cheaper, but if the wizard uses poor-quality parts, the problem will return in a few months. Xiaomi's official service centers give a warranty for repairs, which is an additional protection.

Another common mistake is ignoring the first signs of deformation, and many users think it will go away, but in the case of batteries or mechanical damage, things get worse, and the sooner you take action, the cheaper and easier the repairs will be.

FAQ: Answers to Frequent Questions About Xiaomi Redmi 9C