Your Xiaomi Redmi Note 8T Has stopped responding to the on button, the screen is black, and the indicators are not lit? This problem can arise as a result of software failures (for example, after a failed update). BIOS), And it's also caused by hardware malfunctions, from a dead battery to a damaged motherboard, and 60 percent of the time, the laptop can be reanimated on its own without having to go to a service center.
In this article, we will discuss all the possible reasons why Redmi Note 8T does not turn on, and we offer step-by-step solutions - from elementary charging checks to complex manipulations with the help of the system. BIOS. Particular attention will be paid to typical user errors that exacerbate the problem (for example, repeatedly pressing the power button or using unoriginal power supplies). If you are not sure of your skills, some steps are better to trust professionals - this will save you from the final failure of the device.
1. Power check: power supply, cable and socket
The first thing to rule out is power problems, and even if you are "sure" that the power supply is working, make a full diagnosis:
- π Connect the charger to another outlet, perhaps the machine has gone off or the outlet has failed. Try also connecting through a network filter with a voltage indicator.
- π Check the power supply: the original adapter Xiaomi should burn white indicator when connected to the network. If it flashes or does not light, the block is faulty.
- π Use a different cable: often the problem lies in the damaged one. USB-C cable (especially if it bends at the base) Try a smartphone cable with support PD (Power Delivery).
- π» Connect your laptop to another power supply with similar characteristics (20V/3.25A or 65W). Charging from RedmiBook is suitable 14/16 or Mi Notebook.
If after these manipulations, the charging indicator on the laptop does not light up, the problem may be in the power controller or connector. USB-C. In this case, the device will be dismantled.
β οΈ Warning: Never use power supplies with higher voltage 20V β It can burn the motherboard. Even if the connector fits, check the markings!
Forced reset and discharge BIOS
If you have a Redmi Note 8T Β«Hanging" on a black screen (for example, after an update or abrupt power outage), will help hardware reset. This method works in 40% of cases and does not require disassembly:
- Disconnect the power supply and all peripheral devices (mouse, flash drives, headphones).
- Press the power button for 30 to 40 seconds, and that will drain the remaining charge of the capacitors.
- Connect the original power supply and try to turn on the laptop.
If it doesnβt help, try resetting. BIOS:
- π§ Turn off the power and remove the lower cover of the laptop (a cross screwdriver will be required).
- π Find a battery on the motherboard CMOS (round, silver, the size of a coin).
- β‘ Take it out carefully for 5-10 minutes, then set it back.
- πΎ After assembly, the laptop can turn on with factory settings BIOS.
β οΈ Note: When removing the battery CMOS laptop will reset all settings BIOS, including loading priority and parameters TPM. If you have used BitLocker, you will need a recovery key!
Disabled all peripheral devices
Used the original power supply.
Pressed the power button on 30.+ seconds
Checked the battery. CMOS motherboard
Prepared the BitLocker key (if used)-->
3. Diagnostics of the battery and its shutdown
A common cause of a "dead" laptop is a discharged or bloated battery.Redmi Note 8T It might not even turn on when you're connected to the power supply, if the battery is completely dead or out of order:
- π Connect the charger and leave the laptop for 1-2 hours. If the charging indicator does not burn, the battery can be turned off by the controller.
- π οΈ Disassemble the laptop and inspect the battery: if it is swelled (seen by the bulges on the case), it must be urgently replaced.
- β‘ Disconnect the battery plume from the motherboard and try to turn the laptop on from the power supply only.
If the battery is turned off, the problem is that it's the battery: MB-RB08T-37WH) or compatible (with a capacity of at least 37 Wh).
| Symptoms. | Probable cause | Decision |
|---|---|---|
| Charging indicator does not burn, laptop does not respond to the power button | Faulty power supply or cable | Check the other power supply unit (20V/3.25A) |
| The indicator is on, but the laptop does not turn on | Battery discharged or disconnected | Turn off the battery and try to turn off the network. |
| The laptop is turned on only with a connected power supply | Battery worn out (capacity) < 20%) | Replace the battery with a new one. |
| The laptop turns on, but immediately turns off. | Overheating or malfunction of the motherboard | Clean the dust, check the heat paste |
π‘
If the battery is swelling, do not puncture it! This can cause fire, carefully remove the battery, place it in a non-combustible container and dispose of it according to local regulations.
4. Checking of RAM and SSD
If you have a Redmi Note 8T It turns on, but the screen remains black (or you hear fan sounds, but there is no image), the problem may lie in RAM or the drive:
- Turn off the power and remove the bottom cover.
- Find the slots. RAM (usually covered by a metal plate).
- Carefully remove the memory bars, clean the contacts with a sweeper and set back.
- If there is a second bar, try to start a laptop with one (alternately).
- Check it out. SSD: Unplug it and try to turn on the laptop if there's a message that there's no boot device β SSD faulty.
If, after extraction, RAM The laptop is sounding (for example, long horns), which means that the motherboard is working and the problem is in memory. In this case, try replacing the bars with knowingly working (supported models: DDR4-2666 or DDR4-3200).
What to do if the laptop beeps when turned on?
5. Flashing BIOS emergency
If you have a Redmi Note 8T Not activated after a failed update BIOS or the bootloader crashes, you need to flash it back, and this is only suitable for advanced users!
You'll need:
- πΎ Flash drive. FAT32 capacity up to 16 GB.
- π Official firmware BIOS For the Redmi Note 8T (You can download it on the Xiaomi website).
- π§ Laptop screwdriver.
Instructions:
- Download the archive with BIOS The firmware file must have the.fd or.rom extension.
- Format the flash drive into FAT32 and rename the firmware file to bios.fd.
- Connect the flash drive to the laptop (in any case) USB-port).
- Squeeze the Win combination + B (or Fn) + B on some versions) and, holding it, connect the power supply.
- Release the buttons in 5-10 seconds. The firmware process will begin (the indicator on the flash drive will flash).
- Wait for the automatic reboot (usually takes 3-5 minutes).
β οΈ Attention: Interrupting the firmware process BIOS Make sure the power supply is stable, and don't turn off the laptop until it's finished!
π‘
Emergency firmware BIOS β If you're not sure what you're doing, go to the service center, and the wrong firmware can kill your laptop.
6. Diagnostics of the motherboard and other components
If all previous methods didn't work, the problem is probably the motherboard, the CPU, or the power chip.
- π Visual inspection: disassemble the laptop and inspect the board for burnt items (blackened or bloated capacitors, burn marks).
- π‘οΈ Overheating: If the laptop turns off seconds after turning on, the thermal protection may have gone off.Check the heatpaste on the CPU and graphics chip.
- π Power controller: If the laptop does not respond to the power supply but the battery is charged, the problem may be in the chip ISL6237 or similar.
- π» South Bridge: If not working USB-Ports and screen not turned on, Intel chip may have been damaged PCH.
For accurate diagnosis, you will need a multimeter (a vertebrae of the supply chain) or a postcard (for analysis). POST-If you have no experience in soldering BGA-I'd rather go to the service center for the Redmi Note motherboard repair. 8T in Russia ranges from 5 000 to 15 000 rubles (depending on the malfunction).
How to check the power supply multimeter?
7. When to contact the service center?
If youβve tried all the techniques from this article, but Xiaomi Redmi Note 8T It still doesn't turn on, it's likely that the problem requires professional intervention:
- π₯ On the motherboard, burnt-out elements or traces of a short circuit are visible.
- π₯ The laptop is turned on and off immediately (cyclical reboot).
- π οΈ Chip replacement required BIOS southbridge.
- π Battery swells or leaks (it is dangerous!).
- π» The screen remains black, but the fan is working (possible malfunction of the graphics chip).
At Xiaomi service center, diagnostics usually take 1-2 days.
| Malfunction | Cost of repair (β½) | Date(s) |
|---|---|---|
| Battery replacement | 2 500 β 4 000 | 1 |
| Renovation of the supply chain | 4 000 β 8 000 | 2β3 |
| Flip-flashing BIOS (when the loader is off) | 1 500 β 3 000 | 1 |
| Replacement of the south bridge | 10 000 β 15 000 | 5β7 |
| Diagnosis + dust cleaning | 1 000 β 2 000 | 1 |
Before visiting the service, save a check or a warranty card (if the laptop is guaranteed).
- When did the problem arise?
- Was it preceded by a fall/blow/liquid hit?
- Have you tried a self-repair?