Why Xiaomi is constantly rebooting and not turning on – a complete recovery guide

Your Xiaomi (whether it’s a smartphone, TV or tablet) is stuck in a cycle of endless reboots, and the screen goes out, then for a second shows the logo and turns off again? This problem is familiar to many owners of brand equipment, and the reasons for it can be a dozen: from software failures to hardware malfunctions. The main thing is not to panic and not try to “reanimate” the device at random: wrong actions (for example, interrupted firmware or trying to disassemble the device without experience) often aggravate the situation.

In this article, we will analyze all possible causes of Xiaomi’s cyclical reboot, from the most innocuous (battery discharge) to the critical (damaged motherboard). You will learn how to diagnose a problem by the behavior of the device, what manipulations can be done yourself, and when it is time to bring the equipment to the service. EDL-mode - taking into account the nuances for different models (from Redmi Note 10 to Mi) TV Q2).

If your device still has any way of responding to the buttons (vibrates, lights up), the chances of a successful repair without going to the workshop are 70-85%, provided you follow proven algorithms, start with the simplest tests and gradually move on to complex methods.

1. Primary diagnosis: determine the cause by symptoms

Before you rush to refashion the device, it is important to understand what exactly causes the reboot cycle. Xiaomi's behavior will tell you where to look for the root of the problem:

• 🔋 The device turns on, shows the logo and turns off after 2-5 seconds. → Most likely, the fault of the discharged battery (even if you charged it) or a faulty power supply.
• 🔄 Phone/TV boots before download animation, then restarts → A typical sign of a damaged firmware (for example, after a failed update).
• 🔥 The screen flashes, the device warms and turns off → Possible failure of the processor or problems with RAM.
• 📵 The indicator is on, but the screen is black, there is no reaction to the buttons. → Probably hardware failure (for example, plume dump or short circuit).

Pay attention to the sound signals and vibrations:

• 🔔 One short vibratory call when switched on → The device tries to boot but fails at the bootloader level.
• 🔔🔔 Two vibratory calls in a row → System Integrity Check Error (possibly Flying Firmware).
• 🔕 No vibrations or sounds at all. → The problem with the food or the “dead” motherboard.

If your Xiaomi device behaves differently, like hanging on the Mi logo or showing a “No Command” error, these are other scenarios that require separate solutions.

⚠️ Warning: If the device is heated above 50°C in the off state or smells of a burn - immediately disconnect it from charging! This is a sign of a short circuit and further manipulation can lead to a fire.

2. Power check: battery, charging, power supply

Up to 40% of Xiaomi’s never-ending reboots are due to underpower, and even if you’re sure the battery is charged, follow these steps:

For smartphones and tablets:

1. Connect the device to a known working power supply (for example, from another smartphone) and leave for 30-60 minutes. Sometimes the charge controller blocks power due to overheating or a power surge.
2. If the battery is removable (e.g. in the older Redmi 4X or Mi A1), remove it for 10 minutes, then insert it back in and try to turn it on.
3. Check it out. USB-port for debris or oxidation, clean it carefully with a toothpick (not metal objects!).

For Mi TVs:

• 🔋 If the TV is connected through a network filter, try to turn it directly into the socket - voltage surges are possible.

⚠️ Warning: If the device hisses, cracks or makes other extraneous sounds after being connected to charging, this is a sign of a bloated battery. Immediately stop trying to turn on and contact the service!

Recovery Mode Recovery (if the device reacts in any way)

If Xiaomi is turned on but does not load beyond the logo, try to go to Recovery Mode.This mode allows you to reset your settings or reinstall the firmware without connecting to a PC.

How to log in to Recovery on Xiaomi smartphones:

1. Turn off the device (if it is getting stuck – press the power button for 10-15 seconds).
2. Clip the combination: For most models: Power + Volume up For POCO F1/F2/F3: Power + Volume down For Mi 11/12 series: Power + Volume up (hold until the Mi logo appears)

English-language

For Mi TVs:

1. Turn off the TV for 1 minute.
2. On the remote, press the power button (Power) + Volume down (Vol-) for 10 seconds.
3. Release when the Recovery menu appears on the screen.

Step 1. Install the drivers

1. Download and install Xiaomi drivers.
2. Connect the device turned off to the PC, holding Volume Down + Power (to log in to Fastboot).
3. In Device Manager, check that the Android Bootloader Interface device has appeared.

Step 2. Run the device.

1. Unpack the downloaded firmware (.tgz or.zip format) into a folder without Cyrillic characters.
2. Open the Mi Flash Tool, press Select and select the folder with the firmware.
3. At the bottom, select firmware mode: Clean all – complete cleanup (recommended for critical crashes); Save user data – data storage (not always working).

Refresh

Flash

For Mi TVs:

Instructions:

1. Turn off the device.
2. Press Volume Up + Volume Down + Power and connect to the PC. The device should be defined as Qualcomm HS-USB QDLoader 9008.
3. Open Mi Flash Pro, select firmware and file prog_emmc_firehose.mbn.
4. Press Flash and wait until it is completed (the process can take up to 20 minutes).

If the device still doesn’t turn on after firmware is run through EDL, the problem is likely hardware (damaged motherboard, memory, or processor).

💡

Firmware through EDL is a resuscitation for devices that don't respond to other methods, but it requires technical skills and can lead to lockdown if the device was tied to Mi Account.

6. Hardware malfunctions: when to carry in the service

If all the software methods have been tried and Xiaomi is still fixated on rebooting, the problem is the hardware.

When exactly you need to contact the service:

• 🔥 The device is heated for no reason (even when switched off).
• 💧 On the motherboard, traces of oxidation or dwindles are visible.
• 🔌 After connecting to the charging sparks or smells of a burn.
• 📱 The screen flashes, but the image is missing (possibly a graphics chip problem).

If you decide to repair yourself, consider:

• 🛠️ Xiaomi often requires special glue to replace the battery (for example, for example, B-7000).
• 🔧 Disassembly of Mi TV without experience is fraught with damage to the matrix (the cost of replacement is up to 70% of the price of TV).
• ⚡ Working with the motherboard requires a soldering station and micro soldering skills.

⚠️ Warning: If your device is warranty, don't disassemble it yourself! Opening the case will void the Xiaomi warranty.

7.Prevention: How to avoid repeated failures

To prevent your Xiaomi from getting back into the reboot cycle, follow these guidelines:

• 🔋 Keep the battery from running out of power. Charge the device at 10 to 15 percent charge.
• 🔄 Do not interrupt software updates. If the firmware is "hanging", wait at least 30 minutes before the forced restart.
• 📱 Do not install custom firmware without unlocking the bootloader (this leads to a “brick” in 80% of cases).
• 🛡️ Use the original chargers. Cheap RAMs can cause power surges.
• 🔥 Don't overheat the device. Don't leave your smartphone in the sun or near heat sources.

For Mi TVs:

• ⚡ Connect TV through a network filter to protect against voltage surges.
• 🔄 Update your firmware only on stable Wi-Fi (not via mobile Internet).
• 🕒 Once every six months, reset the cache through Settings. → Annexes → Clear the cache.

If you often experiment with firmware, keep on hand:

• 🔧 The Unlock Tool (Mi Unlock Tool).

💡

Most Xiaomi bricks are caused by interrupted updates or the use of unofficial firmware. Always check the compatibility of files with your model!

FAQ: Frequent questions about Xiaomi reboots