Xiaomi Mi TV MSSP1: How to Watch Movies – 7 Ways to Watch

Xiaomi Mi TV MSSP1 — It's a smart TV with advanced multimedia capabilities, but not everyone knows how to make the most of it for watching movies. USB-Drives, but also streaming platforms, network protocols, and hidden features to improve picture quality. This article will help you understand everything from basic methods to advanced settings for moviephiles.

We will look at all the current ways to play content – from connecting external devices to integrating with cloud services. We will pay special attention to optimizing sound and image, as well as solving typical problems (for example, why the TV does not see files from a flash drive or slows down when playing back). 4K). If you want to turn your Mi into a TV MSSP1 In a full-fledged home theater - read more.

1. Connection USB-drive: formats, limitations and settings

The easiest way to watch movies on Xiaomi Mi TV MSSP1 — use USB-It's a flash drive or an external hard drive, and it supports most popular formats, but there are some nuances about codecs and resolution, like files with higher resolution. 4K@30fps can be played with jerks, if the disk is formatted in FAT32 (It is better to use exFAT or NTFS).

To avoid problems, check:

• 📁 Disc format: NTFS or exFAT (for files) >4GB).
• 🎬 Supported video formats: MP4, MKV, AVI, MOV (full list in the table below).
• 🔊 Audio codecs: AAC, MP3, DTS (not DTS-HD!).
• 🔌 Port port USB: use USB 3.0 (blue connector) for stable playback 4K.

If the TV can't see the flash drive:

1. Restart the TV (hold the power button for 10 seconds).
2. Check the disk on another device (PC, laptop).
3. Format the drive in NTFS via the control panel → Administration → Disk Management (Windows).

💡

If the TV is stuck reading a flash drive, remove it and insert it back in 30 seconds, often solving the problem without rebooting.

⚠️ Attention: Don't pull out USB-drive during playback - this can damage the file system on the flash drive. Always use the Safe Retrieval feature in the TV menu (long press on the Home button). → Devices).

2. Streaming services: KION, Okko, Netflix and others

Xiaomi Mi TV MSSP1 It has pre-installed applications for popular streaming platforms, but their list depends on the region of the firmware:

• 🎥 KION (film-producers 4K HDR).
• 📺 Okko (with Dolby Digital support).
• 🌍 IVI (A large library, but no 4K).
• 🎬 Wink (cinema novelties).

To install additional services (such as Netflix or Disney)+), need:

1. Change your TV region to India or Europe via Settings → Account and security → Region.
2. Install Google Play Store (if not) through Settings → Annexes → Special facilities → Install unknown applications.
3. Download APK-file of the desired service (for example, with APKMirror) and install through Explorer.

Important: When you change the region, some local channels (for example, Channel One or TNT) may disappear. You can only return them by resetting them to the factory settings.

⚠️ Note: Some apps (e.g. Netflix) require region verification via VPN. If you see an error after installation, “This application is incompatible with your device,” try connecting to servers in the United States or the Netherlands via the Internet. VPN router.

3. Viewing movies on the local network (DLNA, SMB, Plex)

If you have a home server or a computer with movies, you can set up streaming without any need to be able to do so. USB-The storage device. TV MSSP1 protocol-support DLNA, SMB Plex app and appendix.

Method 1: DLNA (simple but limited)

• 🖥️ On PC, install the server program: Serviio, Kodi or built-in Windows Media Server.
• 📂 Add the movie folders to the server library.
• 📺 On the TV, open the Media Player. → Local Network and Select Your PC.

Method 2: SMB (for advanced users)

1. On PC, enable sharing to folder: Control Panel → Network parameters → Modify additional parameters of general access.
2. On your TV, install the X-Plore File Manager app (from Google Play).
3. Enter the connection data: smb://IP_your PC/Folder Name (login and password from Windows).

Method 3: Plex (optimum for a large collection)

Plex automatically sorts movies, downloads covers and subtitles, and customizes:

1. Install Plex Media Server on your PC (official website).
2. Add the movie folders to the library.
3. On the TV, install the Plex app and log in.
4. Select your server from the list of devices.

4. Connecting external devices: consoles, laptops, smartphones

If the built-in capabilities of the TV are not enough, you can connect additional devices. TV MSSP1 supportive:

• 🎮 Android TV-Xiaomi Mi Box (Xiaomi Mi Box, NVIDIA Shield) – for extended applications.
• 💻 Laptop/PC via HDMI Miracast (wireless screen duplication).
• 📱 Smartphones (via Google Cast or Xiaomi Screen Mirroring).
• 🖥️ Apple TV (only HDMI, AirPlay is not supported!).

Instructions for connecting a smartphone (Miracast):

1. On TV: Settings → Connections → Wireless display of the screen.
2. On the smartphone Xiaomi: Settings → Connections → Wireless display.
3. Choose Mi. TV MSSP1 device-list.

Make sure the console supports 4K@60fps|

Use high-speed HDMI-cable (version 2.0 and higher)|

Set the regimen on HDMI-CEC on the TV (Settings) → HDMI-CEC)|

Update the firmware to the latest version

-->

Challenges and solutions:

• 🔴 No sound when connected through HDMI: Check the sound settings on the source (for example, on PC, select Digital Audio (HDMI) sound-control).
• 🔴 Lags at Miracast: reduce the resolution of the smartphone screen to 1080p Or connect to the 5GHz network.
• 🔴 The prefix is not determined: try another HDMI-port (on television port) HDMI 1 often takes priority).

5. Optimization of image and sound for cinema

To make movies look as good as possible, adjust your image modes and sound profiles. By default, the TV uses factory settings, which are not always optimal for movies.

Image settings (for movies):

• 🎨 Picture mode: select Movie or Custom (Settings) → Display. → Image mode).
• 🔆 Brightness/Contrast: Set Brightness: 45-50, Contrast: 85-90 (for OLED-reduce the contrast to the models 80).
• 🌈 Color temperature: Warm (6500K) natural-colored.
• 🔍 Sharpness: 0 (factory values are often overestimated).

Sound settings:

• 🔊 Sound mode: Movie or Music (Settings) → Sound. → Sound mode).
• 🎛️ Equator: Increase Low Frequency (100 Hz) by +3dB for bass.
• 🉑 Dolby Audio: Enable in Settings → Sound. → Additionally. → Dolby Digital Plus.

💡

For real theatrical sound, connect the soundbar or AV-receiver HDMI ARC The TV's built-in speakers do not transmit the full spectrum of sound (especially low frequencies).

Calibration using test videos:

Download the test videos (for example, AVS HD 709) and adjust:

• 🎯 Black level: should be deep, but without loss of detail in the shadows.
• 🎯 Color coverage: check the saturation of the primary colors (red, green, blue).
• 🎯 Motion: Turn off Mothion-smoothness (Settings) → Display. → In addition), to avoid the "soap" effect.

6. Solving Typical Problems When Watching Movies

Even after you set it up correctly, you can still get errors, and here are the most common ways to fix them:

If nothing helps:

1. Reset the TV settings to factory: Settings → Account and security → Resetting settings.
2. Update the firmware: Settings → On TV. → Updating the system.
3. Contact Xiaomi with error logs (how to get: Settings) → On TV. → Status of the system → Magazines).

⚠️ Note: If pre-installed applications (e.g. Okko) are missing after the firmware update, reset only applications (Settings) → Annexes → Resetting all applications. This will save your personal data.

7. Hidden features for cinemaphiles

Xiaomi Mi TV MSSP1 There are several hidden features that will improve movie viewing:

• 🎬 Mode of the cinema: activated through Settings → Display. → Additionally. → Mode of the movie, reduces backlighting and improves color reproduction.
• 🔇 Night mode: reduces the volume of explosions and increases dialog (Settings) → Sound. → Night mode).
• 🖥️ Movie Game Mode: Disables Post-processing, Reducing Latency (Settings) → Display. → Game mode. Useful for dynamic scenes.
• 🌓 Automatic brightness: adapts the picture to the lighting in the room (Settings) → Display. → Light sensor).

How to turn on the hidden menu of engineering settings:

This menu allows you to fine-tune the color profile and gamut, but be careful - the wrong settings can spoil the picture!

1. Open the standard settings.
2. On the remote, quickly press the sequence: Up → Up. → Down. → Down. → Left. → Right. → Left. → Right. → Up. → Up.
3. Choose Picture. → Advanced Settings (Do not change values unless you are sure!).

Useful applications for cinema:

• 🎥 Kodi – Media Center with support for all formats and plugins.
• 📺 VLC for Android TV — Plays files that the standard player does not open.
• 🌍 Stremio – a torrent content aggregator (requires) VPN).

FAQ: Frequent questions about watching movies on Xiaomi Mi TV MSSP1