How to enter TNT Premiere from Xiaomi TV: all ways of 2026

Why TNT Premier doesn’t work on Xiaomi TV out of the box

Xiaomi TVs on Android TV or Google TV theoretically support the installation of most streaming services, including TNT Premier. However, many users are faced with the fact that the application is either absent from the official Google Play store or refuses to launch after installation. The reason lies in regional restrictions and content licensing policy – the service TNT Premier is initially focused on the Russian audience, and Xiaomi firmware is often optimized for the global market.

In this article, we will analyze all the current ways to log into TNT Premiere on Xiaomi Mi TV, Redmi Smart TV and other models - from installing an official APK to using alternative methods through Screen Mirroring or external devices such as Mi Box. Particular attention will be paid to typical errors (for example, "Device is not supported" or "DRM error") and ways to bypass them.

If your TV is released before 2020 or runs on PatchWall (the Xiaomi branded shell for India), some of the instructions may not work, in which case we recommend you move to the section about external devices or Android emulation.

Method 1: Installation of the official APK TNT Premier

The most direct method is to download and install the original TNT Premier app manually, but there are nuances: the official APK from Google Play can block launch on "uncertified" devices. To get around this limitation, follow the steps:

1. Activate the installation from unknown sources: Go to Settings → Security and Restrictions → Unknown sources and allow installation for a browser or file manager (e.g., File Commander).
2. Download APK: Use your browser on your TV to go to the official TNT Premier website or a trusted source like APKMirror. Look for an Android TV version (not for smartphones!).
3. Install file: Open the downloaded APK through the file manager. If the "Application not installed" error appears, try the older version (e.g., 2.1.0 instead of 3.0.0).

⚠️ Note: Some versions of TNT Premier require Google Play Services and Widevine DRM level L1. If your Xiaomi TV is not certified for Russia, these components may not be available. DRM via the app DRM Info (available on Google Play).

Download APK from the official website or APKMirror|

Allow installation from unknown sources |

Check the Widevine DRM level (should be L1)|

Update Google Play Services to the latest version-->

Method 2: Use of alternative launchers

If the official app refuses to launch, the problem may be the TV shell. Many Xiaomi models (especially PatchWall) limit the operation of streaming services, the solution is to install an alternative launcher, for example:

• 📺 ATV Launcher – Minimalistic launcher for Android TV, Supports all applications without blocking.
• 🎮 Wolf Launcher – Optimized for gamepads, but also suitable for streaming.
• 🔄 Sideload Launcher – displays all installed APK, including the hidden system.

Installation instructions:

1. Download the APK of the selected launcher (for example, with APKMirror).
2. Install it through the file manager (as in Method 1).
3. Launch the launcher and select it as the main one in Settings → Applications → Default launcher.
4. Now try to reopen TNT Premier – it should appear in the list of applications.

⚠️ Note: Some Xiaomi models (e.g. Mi) TV 4S 55" 2019) a change of launcher can cause a failure of proprietary features like Mi Home or voice assistant.

Standard (PatchWall/Google TV)|

ATV Launcher|

Wolf Launcher|

Other|I don't use it.-->

Method 3: Connecting through external devices

If the software methods don't work, the most reliable option is to use an external device that supports TNT Premier.

• 📦 Mi Box S / Mi Box 4K — Xiaomi official consoles with certified Android TV.
• 🎮 NVIDIA Shield TV — top-end console with support for all DRM.
• 🖥️ Anybody. TV-boxing+ (for example, X96 Max+ Or Beelink GT-King).
• 🍎 Apple TV 4K — via the TNT Premier app from the App Store.

How to connect:

1. Connect the device to the TV via HDMI.
2. In the settings of the TV, select the appropriate signal source (Input → HDMI1/HDMI2).
3. Install TNT Premier from the official app store of the device.
4. Sign in and enjoy the viewing.

💡 Useful tip: If you use Mi Box, upgrade to the latest version via Settings → TV. → System updates. This will solve the content playback problems in 4K HDR.

💡

If the TV doesn't recognize an external device through HDMI, try another cable or port, sometimes rebooting both devices with 30 seconds off the network helps.

Method 4: Screen Mirroring (Duplicate screen)

If you don't have an external console, but you have a smartphone or tablet that supports TNT Premier, you can duplicate the screen on your TV. This method works on all Xiaomi models, including the old Mi TV 3/4.

Instructions for Android:

1. Make sure that your TV and smartphone are connected to the same Wi-Fi network.
2. On your TV, activate Screen Mirroring (Settings → Connections → Wireless Display or Miracast).
3. On your smartphone, open Settings → Connections → Screen broadcast (on Xiaomi – Wireless Display).
4. Select your TV from the list of available devices.
5. Run the TNT Premier app on your smartphone – the image will appear on the TV screen.

Instructions for iPhone/iPad:

1. Connect both devices to the same Wi-Fi network.
2. On your TV, turn on AirPlay mode (if supported) or use Apple TV as a middleman.
3. On your iPhone, swipe down from the top right corner (iOS 12+) and press Screen Mirroring.
4. Choose your Xiaomi TV or Apple TV from the list.

⚠️ Note: When the screen is duplicated, there may be a delay in sound (up to the end of the screen). 1-2 To sync audio and video, try:

• 🔊 Use an external sound system (e.g., Xiaomi Soundbar) via Bluetooth or HDMI ARC.
• 📱 On the smartphone, turn off sound processing in the developer settings (Settings) → The phone. → Assembly number (7 taps) → Disable "Audio through" HDMI»).

Method 5: Emulate Android TV via ADB

For advanced users, there is a way to trick TNT Premier into thinking it’s running on a certified Android TV.

• 🖥️ Computer installed ADB (Android Debug Bridge).
• 🔌 USB-cable.
• 📄 Developer rights on TV.

Step-by-step:

1. Activate Developer Mode on your TV: Go to Settings → About TV → Software Version and click on the version number several times until the “You’ve become a developer” notification appears.
2. Enable USB debugging: Return to Settings → For developers and activate USB debugging.
3. Connect the TV to the PC and execute commands in ADB: adb shell settings put global hidden_api_policy 1 settings put global hidden_api_policy_pre_p_apps 1 settings put global hidden_api_policy_p_apps 1 These teams will unlock the hidden API, Android-essential TV.
4. Install a modified TV Settings app (available on 4PDA) and change settings: ro.product.device → "dragon" (or "sabres") ro.product.model → "ADT-3" This will make the system identify as an Android TV device.
5. Restart the TV and try to start the TNT Premiere.

⚠️ Attention: Misuse of the right ADB This can lead to a loss of warranty or a “brick” of the TV. Before experimenting, back up your firmware through adb backup or MiFlash utility.

💡

Emulation of Android TV is an extreme method that should only be used if other methods have not worked, it requires technical skills and can disrupt the stability of the system.

Addressing common mistakes

Even after a successful TNT installation, the Premier can issue errors, and consider the most common and ways to correct them:

💡 If after updating the firmware of the TV TNT Premier stopped working, try to roll back to the previous version of the software. To do this, download the necessary firmware from the official Xiaomi website and thread it through it USB-OTG (The instructions are in the Settings section → On TV. → Update through USB).

FAQ: Frequent questions about TNT Premiere on Xiaomi TV