How to download and install Mi Fit on Xiaomi Redmi: all ways 2026

Xiaomi’s Mi Fit app has become an indispensable tool for Mi Band fitness bracelets, smart scales and another Mi Ecosystem ecosystem. However, users of Redmi smartphones sometimes face difficulties in installing it – the application may not appear in the Play Market, give compatibility errors or require additional settings. In this article, we will discuss all the current ways to download Mi Fit on Xiaomi Redmi, including solutions for devices without Google services, with custom firmware or outdated versions of MIUI.

The Mi Fit is very integrated with Xiaomi’s ecosystem, but it has regional limitations, such as replacing the app with Zepp Life (formerly Amazfit) in some countries, which is confusing, and we’ve analyzed the nuances and developed generic instructions that work on models from the Redmi Note 8 Pro to the Redmi 13 Pro+ with MIUI 14/15 and HyperOS.

1.Official method: Install Mi Fit from Play Market

The most reliable method is to download the app through Google Play, but there are pitfalls here. First, Mi Fit can be hidden to your region (e.g., in Europe, it is replaced by Zepp Life). Second, on some MIUI firmware without Google Mobile Services (GMS), the app store simply doesn't work. Check the following points before installing:

• 📱 Make sure that your smartphone has Google services installed (check Settings). → Annexes → Application management. If they are not available, you will need to flash GMS separately.
• 🌍 Check the region of your Google account: if it is tied to a country where Mi Fit is not available (e.g. China), the app will not show up. VPN.
• 🔄 Update Play Market and Google Play Services to the latest versions.Outdated versions often block new apps from being installed.

If all is well, search for “Mi Fit” and install an app from developer Xiaomi Inc. Note the version: current for 2026 – 5.6.0 and higher. Older versions (below 5.0) may not support new devices such as the Mi Band 8 or Xiaomi Watch 2 Pro.

⚠️ Note: If you have a device not certified error when you install it, it means your Redmi has not been certified by Google, so you can manually register your device through the official Google Form (you will need to register it). IMEI smartphone).

Alternative method: downloading APK-file

If the Play Market is not available or Mi Fit is not displayed in the search, you can install the application through the search engine. APK-This is a method that works for devices without a file. GMS (For example, on Chinese firmware, or with regional restrictions, it is important to download the file only from verified sources to avoid viruses or modified versions.

The best sites to download Mi Fit APK:

• 🔗 APKCombo – Stores all versions of the application, including beta releases.
• 🔗 APKMirror – checks files for malicious code.
• 🔗 Uptodown – an alternative with regular updates.

Installation instructions:

1. Download the latest version of Mi Fit APK (for example, com.xiaomi.hm.health_5.6.0.apk).
2. Go to Settings → Applications → Special Permissions → Installation from unknown sources and allow installation for your browser or file manager.
3. Open the downloaded file and confirm the installation. If the warning "App could harm the device" appears, ignore it - this is the standard message for all APKs.
4. After installation, launch Mi Fit and log in via your Xiaomi account (required!).

⚠️ Attention: Never download APK In 2023, there were cases when modified versions of Mi Fit stole Xiaomi account data (MD5) before installation!

3. Installation via Mi App Store (for Chinese firmware)

Redmi’s Chinese ROM smartphones use the Mi App Store (or GetApps) instead of Play Market, which has Mi Fit as its default but can be called “Xiaomi Sport,” but there’s a caveat: the app will be in Chinese and will require a Xiaomi account tied to China to work.

Step-by-step:

1. Open the Mi App Store (Blue Robot icon).
2. In the search box, type “Mi Fit” or “Mi Fit”.
3. Install the application and run it. If the interface language is Chinese, switch it in the settings ( → ).
4. Sign in via Xiaomi account. If you do not have a Chinese account, create it through the official website by selecting the region "(mainland China).

Important: Pegging to the Chinese region can restrict access to some features, such as syncing with Google Fit or Apple Health.If you need these options, it's best to use APK-section 2.

4. Solving compatibility and error issues

Even after a successful installation, Mi Fit may not work correctly. Consider typical errors and their solutions:

• 🚫 «Device not supported" - appears on older Redmi models (e.g. Redmi) 5/6) or with an outdated version MIUI. Solution: Update the firmware to MIUI 12+ Use Zepp Life instead of Mi Fit.
• 🔄 «Sync Error – Check the permissions of the application (Settings) → Annexes → Mi Fit → Permits) and enable access to Physical Activity, Locations and Warehouse.
• 🔋 «Unable to connect to the bracelet" — turn off Bluetooth, reboot the smartphone and bracelet, then re-pair. If the problem persists, reset the bracelet settings through Settings → Resetting in annex.
• 📱 «The app closes immediately" - clear the cache (Settings) → Annexes → Mi Fit → Clear the cache) or reinstall APK.

If none of these methods worked, check if an antivirus or an optimizer (such as Security or Clean Master) is blocking the application, add Mi Fit to exceptions or temporarily disable protection.

5.Setup Mi Fit after installation

After the first Mi Fit launch, you will need a basic setup, and here are the key points to pay attention to:

1. Account binding: Use the same Xiaomi account across all devices to keep your data synced. If you have multiple bracelets (e.g. Mi Band 7 and Xiaomi Watch S3), you can connect them to the same account.
2. Permissions: Give the application access to: 📍 Location (to search for Bluetooth devices). 🏃 Physical activity (to collect data from sensors). 📁 Storage (for backup of settings).

Notifications

Profile → Notifications

WhatsApp

Telegram

For advanced users, it is useful to configure:

• 🔋 Energy saving: Turn off background synchronization if you want to save battery power on the bracelet.
• 🌙 Night mode: Set up automatic shutdown of notifications during sleep.
• 📊 Data export: Connect sync with Google Fit or Apple Health in Settings → Integration.

6.Update Mi Fit and bracelet firmware

Regular Mi Fit updates and bracelet firmware fix bugs and add new features. However, on Redmi with unofficial firmware or without GMS, automatic updates may not work. Here's how to manually update:

Update of the annex:

• If installed through the Play Market, updates will come automatically.
• If installed via APK, download new versions from APKMirror and install on top of the old one.

Update of the bracelet firmware:

1. Open Mi Fit and go to your device’s section (e.g. Mi Band 8).
2. Slip on the three dots in the top right corner and select “Firmware Update”.
3. If the update does not appear, check it out: 📶 A stable Internet connection (better via Wi-Fi). 🔋 Bracelet charge (must be at least 50%). 📱 Compatibility of the smartphone firmware (on the MIUI Updates below 12 may not be available).

⚠️ Warning: Don't interrupt the bracelet firmware update process! If your smartphone battery runs out or the bracelet is interrupted, the device may turn into a brick. Charge both gadgets to 100% before starting.

💡

Always update your Mi Fit and bracelet firmware through official sources. Using modified firmware (such as from Amazfit) can result in loss of functionality or locking your Xiaomi account.

7. Mi Fit Alternatives: When a Standard App Doesn't Apply

If Mi Fit doesn’t install or work on your Redmi, consider alternative apps that are suitable for Mi Band bracelet owners, but may have limited functionality:

• 🔄 Zepp Life (formerly Amazfit) is the official Xiaomi bracelet app in Europe. 6/7/8, Not all functions (for example, no music management).

Warning: Third-party applications may violate Xiaomi’s terms of use and result in device locking. For example, Mi Band Master has sometimes caused steps synchronization problems. Before installing, back up your data to Mi Fit (Profile → Settings → Backup).

8. Frequent Questions (FAQ)

💡

If Mi Fit is constantly draining your Redmi battery, turn off the app's background activity in settings (Settings → Applications → Mi Fit → Battery → Background activity).This will reduce charge consumption, but may slow down data synchronization.