The Complete Guide: How to Improve Xiaomi’s Screen Recording Quality in 2026

Screen recording on Xiaomi smartphones is a useful feature for creating guides, streams or saving game moments, but often users face problems: low resolution, jerks in video or incorrect frame rate. The reasons are not only hardware limitations, but also incorrect system settings or applications used. In this article, we will examine all available optimization methods, from standard tools to the best possible ones. MIUI to third-party utility with support 1080p@60fps.

Feature of Xiaomi devices (including Redmi models, POCO and flagship series) — there's a built-in screen recorder that defaults to resource saving mode, which means that without additional setup, you'll get video resolution. 720p bitrate ~5 Mbps, which is not enough to record games or professional tasks in detail. Fortunately, there are ways to get around these limitations, both software and hardware.

It's important to consider that the recording capabilities depend on the smartphone model. 13 Ultra supports recording in 4K@30fps through third-party apps, while budget Redmi Notes 12 limited 1080p@60fps. In this article, we will show you which methods are suitable for specific product lines so that you don’t waste time on useless experiments.

1. Optimization of the built-in screen recorder in MIUI

Standard application "Screen recording"** in MIUI 14/15 It hides some of the settings, but you can activate them through a developer menu or through special commands:

First, check the current recording parameters.

1. Open Settings → Special Options → Screen recording.
2. Slap the gear icon (⚙️) top-right.
3. Choose the quality of the video → High (1080p).
4. Activate the option to Show touches if you need to record gestures.

However, even in the “high” mode, the bitrate remains low (~8 Mbit/s. To increase it:

Also, pay attention to the source of the sound. The built-in recorder allows you to record:

• 🎵 Systemic sound is a pure audio stream, but requires MIUI 13+.

💡

If after changing the settings, the recording still slows down, try turning off Windows animation in the developer settings (Settings) → The phone. → Version. MIUI — tap 7 times).

2. Third-party applications for screen recording: TOP-5 decision-making

Xiaomi's built-in recorder is inferior to customization flexibility programs, and we tested 15 apps and selected the best ones for different tasks:

We recommend for games. AZ Screen Recorder – it supports recording 4K (on Xiaomi flagships 12/13 series) and allows you to configure the codec (H.264 or H.265). The latter provides better compression at the same quality, but requires more CPU resources. To avoid overheating, use a cooling stand or limit the processor. FPS before 60.

When choosing an application, consider the Android version:

• 🤖 Android 12.+ (MIUI 13-15) all applications from the table are working.
• 📱 Android. 10/11 (MIUI 12) You may have trouble recording system sound.
• ⚠️ On Android 9 and below, some features are available, 60fps) not.

3. Setup permissions and performance for recording

Even with the best software, the quality of the recording depends on the hardware capabilities of your Xiaomi.

1. Free up the RAM:

• 🧹 Close all background applications through Recent → Close it down.
• 🔄 Reboot your smartphone before recording.
• 🚫 Turn off auto-update apps in Settings → Annexes → Auto-update.

2. Optimize the performance settings:

• ⚡ Enable Performance Mode in Settings → Battery → Regimes.
• 🔧 Turn off Adaptive Brightness and set a fixed value (e.g., 80%).
• 📶 Switch to the switch. 4G/5G instead of Wi-Fi if you record online streaming (less lags).

3. Check the compatibility of permits:

Not all Xiaomi devices support recording 4K or 1440p. Here are the model restrictions:

• 📱 Redmi Note 10/11/12, POCO X3/X4: maximum 1080p@60fps.
• 📱 Xiaomi 11T/12/13, POCO F4/F5: support 4K@30fps.
• 📱 Xiaomi 13 Ultra, Black Shark 5: recording 4K@60fps (only AZ Recorder).

Close background annexes

Reset the device

Enable productivity mode

Turn off adaptive brightness

Check the vacant space (minimum 2 GB)

-->

Critical error: on devices with Snapdragon chipsets 6xx MediaTek Helio Gxx recording 4K This leads to severe lags because of the limitations of the video core, and then you have to prioritize the choice. 1080p@60fps high-bitrate (15–20 Mbit/s).

4. Solving lag and jerk problems in video

If the recording is slowing down or the video is ripped, the problem lies in one of three factors: the processor, the memory, or the codec settings, and we'll look at each case.

Reason. 1: Overloading CPU/GPU

Xiaomi chipsets of the mid-range (for example, Snapdragon) 720G Dimensity 900 is not optimized for simultaneous recording and playing:

• 🎮 Lower your graphics settings to Medium or Low.
• ⚙️ In the recorder settings, select the codec H.265 (HEVC) — It's less loading on the processor.
• ❄️ Use a cooling cover or fan (overheating reduces performance by 20-30%).

Reason 2: Lack of RAM

On devices with 4-6 GB of RAM (for example, Redmi 9 or POCO M3) background processes may interfere with recording:

1. Open the settings → About the phone → Memory.
2. If less than 1.5GB is free, close the unnecessary apps.
3. Install the Greenify app to “freeze” background processes.

Reason 3: Incorrect bitrate settings

Too high bitrate (for example, 50 Mbit / s on a weak device) leads to a frame pass.

• 📱 For 720p@30fps: 8–12 Mbit/s.
• 📱 For 1080p@60fps: 15–25 Mbit/s.
• 📱 For 4K@30fps: 30–40 Mbps (for flagships only).

💡

If the lags appear even at low settings, try writing through USB-Debugging on a PC using Scrcpy or Vysor, which will reduce the load on the smartphone.

5. Recording sound without noise: microphone vs. system audio

Sound quality is as important as video. MIUI It allows you to record only from the microphone, which leads to extraneous noise:

Method 1: Record system audio (required) MIUI 13+)

1. Install the ScreenCam app or AZ Recorder.
2. In the audio settings, select the Audio Record.
3. Confirm the permission to record audio in the Android settings.

⚠️ Note: On some models (for example, Redmi Note 11 on the MIUI 12.5) this feature may not work due to Xiaomi limitations. ADB:

Method 2: External microphone

If you need a clean voice comment (for example, for streams), plug in USB-C Or a Bluetooth microphone. The best options for Xiaomi:

• 🎤 Boya BY-M1 (3.5mm jack, suitable for Redmi Note 10 and older).
• 🎤 Fifine K688 (USB-C, compatible POCO F3 flagship).
• 🎤 Rode VideoMic Me-L (for professional recordings, requires an adapter).

Method 3: Synchronize audio and video in the editor

If the recording of sound and video takes place separately (for example, voice to voice recorder, and video - through the recorder), sync the tracks in CapCut or KineMaster:

1. Import both files into the project.
2. Find a common moment (for example, a clap in your hands).
3. Line up the audio tracks at this point.

💡

To record game sound without a microphone, use the AudioRelay application (transmits audio from PC to phone over a local network).

6. Alternative recording methods: via PC or other device

If built-in and third-party solutions are not suitable, consider recording the screen through a connection to the computer. This method guarantees maximum quality without loading on the smartphone.

Method 1: Scrcpy (free, no root)

Scrcpy is an open source software for managing an Android smartphone from a PC and recording the screen in 1080p@60fps. Instructions:

1. Download Scrcpy and unpack the archive.
2. Turn on USB Debugging on your phone (Settings → About Phone → MIUI version – tap 7 times, then go back to Additional → For Developers).
3. Connect Xiaomi to your PC and launch scrcpy.exe.
4. To record, use the command: scrcpy --record=video.mp4 --bit-rate=20M

Method 2: Vysor (Paid, Simple Interface)

Vysor offers a comfortable GUI and support for recording 4K (The downside is the 1 to 2 second delay. How to set up:

• 💻 Install Vysor on PC.
• 📱 Connect Xiaomi to the USB (Mode of File Transfer).
• 🎥 In the Vysor settings, select Quality. → High and Frame Rate → 60fps.

Method 3: Mirroring on another smartphone

If you have a second Xiaomi (or Android 10 device)+), Use the ApowerMirror app to stream your screen over Wi-Fi and record on your second phone, which is useful for long sessions (like streams) because it prevents the main device from overheating.

💡

Recording via PC is the only way to get 4K@60fps on devices with Snapdragon 7xx Dimensity 1xxx, where third-party applications are limited 1080p.

7. Optimization of recorded video: editing and compression

Even a perfectly recorded video can take up too much space or require some work.

1.Pruning and gluing

Use CapCut (free, watermark-free) or KineMaster (paid but with advanced features) to:

• ✂️ Removal of unnecessary fragments.
• 🎞️ Additions of transitions and subtitles.
• 🔊 Normalization of sound (elimination of quiet/loud areas).

Compression without loss of quality

To reduce the file size without losing details:

• 📦 Use HandBrake (on PC) with a preset H.265 (HEVC).
• 📱 On the phone, install Video Compress (with support for Xiaomi).
• ⚙️ Optimal settings for 1080p: Bitrate: 8–12 Mbps Codec: H.265 FPS: originality

3. Elimination of noise and artifacts

If the video is grainy or with stripes, use:

• 🎥 Topaz Video AI (AI enhancement, paid).
• 📱 PowerDirector (Denise filter for noise).
• 💻 Adobe Premiere Rush (Warps Stabilizer tool).

💡

Before uploading a video to YouTube or TikTok, export it in format MP4 codeced H.264 — This will ensure maximum compatibility.

8. Frequent errors and their solutions

Even experienced users have problems recording screens. TOP-5 errors and ways of eliminating them:

⚠️ Note: Some Xiaomi models (e.g. Redmi) 9A or POCO C31) The screen recording can be completely blocked due to weak iron, in which case the only way out is to use a second device to shoot the screen (for example, through the use of a second device). OSMO Mobile).

If none of these methods worked, check firmware integrity, and sometimes write problems occur after unofficial updates or resets, to get things back to their original state.

1. Make a backup copy of the data.
2. Go to Settings → About the phone → Reset settings.
3. Select Reset all settings (does not delete files).

FAQ: Answers to popular questions