The question of how many inches the Xiaomi Redmi Note 7 screen is is often asked by users who choose a protective glass or compare the dimensions of the device with competitors. This smartphone has become a real hit thanks to a successful combination of performance and quality matrix. Understanding the exact physical parameters of the display is critical to assessing ergonomics and usability with one hand.
The screen size of this device is 6.3 inches, which was considered the standard for modern phablets at the time of release. However, it is important to consider not only the linear dimensions, but also the aspect ratio, which is 19.5:9. This proportion makes the body visually narrower, but higher, which makes it easier to reach the palm, despite the impressive area of the image displayed.
In this article, we will discuss the technical specifications of the panel, the topic of pixel density and the impact of Gorilla Glass technology on the durability of the device. You will get comprehensive information about how exactly 6.3 inches feel in real life and how this model differs from its predecessors in the Redmi line.
Exact diagonal parameters and aspect ratio
The main characteristic most owners are interested in is the physical size of the visible area. As mentioned, the Xiaomi Redmi Note 7 is equipped with a matrix with a diagonal of 6.3 inches. In the metric system, this corresponds to about 16 centimeters. This value is measured diagonally between opposite corners of the workspace, excluding the frame of the case.
19.5:9 is a key aspect ratio in how you experience content. Unlike the classic 16:9, it's more vertical, and it allows you to comfortably hold your smartphone, reach your thumb to the top of the interface, and while watching landscape video, the black bars on top and bottom can be more visible than on wider screens, but modern players can scale to fill the entire space.
⚠️ Note: When buying a protective glass, pay attention to the marking "Full Cover" or "3D", Because of the rounded edges and the 19.5:9 ratio, the ordinary flat glass is 2.5D may not cover the entire useful area or peel off at the edges.
Pixel density per inch (PPI) This model achieves significance 412. This is a pretty high rate, which allows for font clarity and no visible graininess even when viewed closely. 300-350 PPI, It made the picture less detailed.+ (2340×1080 on such a diagonal looks very juicy and bright.
Manufacturing technology of IPS LCD matrix
The Redmi Note 7 display is based on technology IPS LCD. It's a time-tested solution that's valued for its natural color reproduction and wide viewing angles. AMOLED-screens, there is no effect of "swipe" when swipes, and the white color remains white at any brightness, without going into gray or greenish shades.
The brightness of the panel is 450 cd/m2 (nite), which is enough to comfortably use the smartphone indoors and in cloudy weather outside. However, in direct bright sunlight, readability can decrease, and you have to look for shade or increase the brightness to a maximum, which quickly consumes battery power. Contrast is static and is at 1500:1, which is a good indicator for IPS-matrixes of the middle segment.
The color gamut covers 100% of the sRGB space, which means that colors are transmitted accurately, without the excessive saturation that often occurs in the sRGB. AMOLED-For viewing photos and surfing the web, this is the best option, since the eyes are less tired of unnaturally bright colors. → Screen. → Colors and saturation, the user can choose from three modes: Standard, Improved or Customizable.
- 🎨 Natural: Colors look the way content creators intended without artificial saturation.
- 👁️ Viewing angle: When viewed from an angle, colors do not invert or pale, which is characteristic of high-quality colors. IPS panels.
- 🔆 SIM: No flickering (PWM) Low brightness makes the screen safe for people with sensitive vision.
💡
If you think the colors on the screen are too pale, go to the display settings and select “Enhanced” or “Tuneable” mode to add saturation to the picture.
The Corning Gorilla Glass 5 Protection Coating
One of the key features that set the Redmi Note 7 apart from its competitors was the use of Corning Gorilla Glass 5, both in front and behind, which provides high resistance to scratches from keys, small pockets and other abrasive materials, and also improves the impact strength when falling from low heights.
Despite its high strength, glass remains glass. Falling on asphalt or concrete at a sharp angle can lead to cracks or chips. Manufacturers often claim survival from a 1.2 meter drop on a rough surface, but in real conditions it depends on the angle of fall and the presence of sharp stones on the surface.
| Parameter | Meaning | Description |
|---|---|---|
| Type of glass | Gorilla Glass 5 | Protection against scratches and impacts |
| Thickness | ~0.8 mm | Standard thickness of the protective layer |
| Coverage | oleophobic | Repels fat and facilitates finger slipping |
| Firmness | 6-7 Mohs | Higher than most metals and sand |
The oleophobic coating on the screen helps to combat fingerprints and makes it easier to slip your finger when playing or typing, and over time (usually after 6-12 months of active use), it can wear off and the screen will become more contaminated, and you can restore it with special fluids or buy a new protective glass with a factory coating.
⚠️ Note: Do not use aggressive chemicals containing alcohol or acetone in high concentrations to wipe the screen, as they can damage the oleophobic layer and make the matrix dull.
Can I break Gorilla Glass 5?
Ergonomics and body dimensions
Diagnosis smartphone directly depends on the size of its screen. diagonal 6.3 inches width of the case Redmi Note 7 is 75.2 mm, and height — 159.2 mm. the thickness of the device is 8.65 mm. These dimensions make the smartphone quite large, but due to the aspect ratio it does not seem too wide.
The weight of the device is 186 grams, which is the average for modern smartphones with a metal frame and a glass back panel, the phone feels weighty in the hand, which gives the impression of reliability and build quality, but with prolonged use with one hand (for example, when reading books or texting in transport), fingers can get tired.
The frames around the display are minimal, especially on the sides, which creates an immersive effect. The upper and lower frames ("chin") have also been significantly reduced compared to previous models of the Note series. This allowed you to fit a large matrix in a body of standard sizes. In the upper frame, there is a conversational speaker, a proximity and lighting sensor, and a front camera.
- 📏 Width: 75.2 mm - comfortable for a man's hand, women can be difficult to cover completely.
- 📐 Height: 159.2 mm – requires the use of a second hand to navigate in the upper areas of the interface.
- ⚖️ Balance: The center of gravity is shifted to the center, which prevents falling out of hands with a clumsy grip.
☑️ Checking ergonomics in the store
Display settings and calibration
The MIUI Android operating system gives the user a lot of options to adjust the screen. You can change not only the brightness, but also the color temperature, reading mode and time before the backlight is turned off. All these settings are in the Settings → Screen menu.
Read Mode mimics the texture of paper by putting the image in a monochrome yellowish mode, which reduces eye strain when reading texts in low light, and a color temperature setting is available, where you can shift the white balance towards warm or cold colors depending on your personal preferences.
Automatic brightness control works quite well using the light sensor data, but sometimes the algorithms can be delayed when you suddenly switch from a dark room to a bright light, in which case you should manually set a comfortable value, and the system will remember your choice for such lighting conditions.
💡
Proper screen calibration and the use of reading mode significantly reduce eye fatigue during prolonged work with a smartphone.
Comparison with competitors and analogues
At the time of the release of the Redmi Note 7 with its 6.3-inch screen successfully competed with models like Samsung Galaxy A50 The main advantage of Xiaomi was the availability of FullHD.+ warrant HD+ Some competitors, and some more durable glass.
Compared to newer models, the current standard has shifted to 6.5-6.7 inches. However, for many users, the 6.3 inch format remains the “golden mean”, providing a balance between multimedia capabilities and ease of control. New models often have a refresh rate of 90 or 120 Hz, which makes the picture more smooth, but the standard 60 Hz in the Redmi Note 7 look worthy of good optimization.
Importantly, the quality of the array in the Redmi Note 7 has often been praised by reviewers for its stability and lack of defects, and even after a few years of use, the screens of these devices rarely fade or lose brightness, which indicates a good resource of the components used.