When choosing a Xiaomi Mi TV 4S, many users are faced with the question: how much does it weigh? This parameter is critical not only for transportation, but also for the correct installation - whether it is a wall mount or placement on the stand. The weight depends on the screen diagonal, the type of stand and even the configuration (for example, the presence of a remote with voice control). In this article, we have collected current data for 2026 for all modifications of the Mi TV 4S, including weight in the package, nuances of installation and comparison with analogues from Samsung and LG.
It is especially important to consider weight when buying a TV online — many courier services limit the weight of the load to 30 kg, and the dimensions of the package can exceed standard standards. For example, the Mi TV 4S 65 in a box weighs almost 25 kg, which requires special delivery conditions. We will also discuss how to correctly calculate the load on the wall or furniture to avoid collapse of the structure.
If you're planning a self-installation, you'll find a checklist on surface preparation, mounting selection, even uncorrupt tips, and for those comparing models, we've prepared a table with the weight of the competition to help you make an informed choice between Xiaomi, Redmi, and other brands.
Official data: weight Xiaomi Mi TV 4S by diagonal
The manufacturer indicates the weight of the Mi TV 4S without packaging, but with a stand. However, for logistics and installation, it is more important to know the full mass in the box, including foam inserts and protective films.
| Diagonal (inches) | Weight without packaging (kg) | Package weight (kg) | Box dimensions (D)×Shh.×V, cm) | Type of stand |
|---|---|---|---|---|
| 32" | 4.1 | 5.8 | 88 × 18 × 52 | Two legs (V-shaped) |
| 43" | 6.5 | 9.2 | 110 × 22 × 65 | Two legs (flat) |
| 50" | 9.8 | 13.5 | 128 × 25 × 72 | Central rack |
| 55" | 12.3 | 17.0 | 145 × 28 × 78 | Two legs (wide) |
| 65" | 18.7 | 24.5 | 168 × 32 × 85 | Central rack (metal) |
Important: the weight of the Mi TV 4S 2023-2026 may differ from earlier models by ±0.5 kg due to changes in the materials of the case (for example, the transition to an aluminum frame instead of a plastic one).
For accurate calculation of load on furniture or fastening use the weight without packaging (it is specified in the technical passport of the device). If you order delivery, check with the seller the gross weight - some stores add additional protection to the box, increasing the weight by 1-2 kg.
Why weight is more important than it seems: the risks of installation
Incorrectly calculating the weight of a TV can lead to mount collapse, wall damage, or even injuries.
- 🔨 Wall mounts: Standard brackets can withstand up to 20 Kg, but for Mi. TV 4S 55" and above, reinforced models are needed (for example, VESA 400×400 safety-preserve 30 kilogram).
- 🪑 Stands and stands: The furniture must withstand 1.5 times the weight of the TV (in case of a fall or vibration). For example, for a 65-inch model, the minimum load on the bench is 28 kg.
- 🧱 Wall type: Drywall without mortgages will not withstand even a 43-inch Mi TV 4S — You need a locker to the capital wall.
- 🔌 Cables and sockets: The weight of the TV can shift the center of gravity if the cables are pulled or the socket is uncomfortably located.
⚠️ Warning: If you are placing the TV above the fireplace or heater, be aware that heating reduces the strength of the plastic parts of the stand. TV 4S with a diagonal of 50" and above, this can lead to deformation after 1-2 years.
Before editing, check:
Check the weight of the TV in the documentation
Choose a fastener with a margin of safety +30%
Make sure the wall is load-bearing (not drywall)
Use the level for a flat installation
Fix cables with ties to avoid tension-->
Comparison with competitors: who is easier?
The weight of Xiaomi Mi TV 4S is often compared to other brands in the same price segment, and the following is the most popular (weightless) data:
| Brand and model | Diagonal | Weight (kg) | Features |
|---|---|---|---|
| Xiaomi Mi TV 4S | 55" | 12.3 | Metal frame, thin body |
| Redmi Smart TV X | 55" | 11.8 | Plastic case, lighter stand |
| Samsung CU7000 | 55" | 13.1 | Reinforced VESA fastening, heavier by 0.8 kg |
| LG 55UP7500 | 55" | 12.7 | A thicker body, but lighter than Samsung |
| TCL 55P615 | 55" | 11.5 | Lightest in the segment, but worse assembly |
Xiaomi Mi TV 4S is mid-weight: lighter than Samsung, but heavier than TCL and Redmi, while the quality of materials Xiaomi higher metal frame and a strong stand make the TV more resistant to vibration.
If you care about the minimum weight, consider the Redmi Smart TV X, which is 5 to 10 percent lighter because of its plastic body, but remember that it has an impact on longevity: when used extensively (e.g. in a family with children), plastic can crack when dropped.
💡
When choosing between the Mi TV 4S and Redmi Smart TV, check not only the weight, but also the location of the connectors. Xiaomi has them sideways, which makes it easier to connect cables during wall mounting.
How to transport Xiaomi Mi TV 4S?
Transporting a TV is a critical step, especially if you're talking about diagonals 50 and above.
- 🚚 Vertical position: Carry the TV only in the vertical position (screen up). flatbed stacking can cause damage to the matrix due to pressure on the center.
- 📦 Original packaging: If the box is damaged, use bubble film and cardboard inserts to fix. The minimum thickness of the protective layer is 5 cm on all sides.
- 🌡️ Temperature: Avoid transport in temperatures below -10°C or higher +40°C – This can damage the liquid crystal panel.
- 🔄 Careful loading: Don't pull the TV behind cables or a stand. Lift the box by the lower corners, spreading the load evenly.
⚠️ Note: If you are carrying Mi TV 4S 65" in the trunk of the car, make sure the box does not come into contact with metal parts of the body.Vibration when driving can cause microcracks in the matrix, which will manifest later in the form of broken pixels.
For large diagonals (55" and 65"), it is recommended to use specialized delivery with lifting equipment. The cost of this service starts from 1,500 rubles, but it guarantees the safety of the equipment. If you transport the TV yourself, enlist the help of a second person - even a 43-inch model in a box weighs almost 10 kg, and it is inconvenient to carry it alone.
What to do if the TV falls during transportation?
Weight and installation: how to choose a fastener?
For the wall installation Xiaomi Mi TV 4S critical to choose bracket, corresponding to the weight and standard VESA.
- 📺 32"–43": A universal bracket will do. VESA 200×200 load-bearing 15 kg (e.g. OmniMount) OE220).
- 🖥️ 50": We need a fix. VESA 300×300 (before 25 kg), e.g. Sanus VLT6-B1.
- 🎥 55"–65": Only reinforced models VESA 400×400 safety-preserve 40 Kg (recommended Peerless) PRG2).
When choosing a fastener, consider:
- Wall material: For concrete, M8-M10 anchor bolts are suitable, for drywall, "butterflies" or mortgages are needed.
- Type of bracket: Fixed (cheaper) or inclined (more convenient for adjusting the viewing angle).
- Installation depth: The Mi TV 4S connectors are located on the side, so the minimum distance from the wall is 5 cm.
For the 55" and 65" models, be sure to use metal dowels - plastic dowels will not withstand weight during prolonged loading. If you attach the TV to the wall of foam blocks, use chemical anchors (for example, Hilti HIT-HY 70).
💡
For the Mi TV 4S 65" minimum depth drilling under the anchor - 60 mm. If the wall is thinner, use a through mount with spacer bushings.
Frequent Installation Errors and How to Avoid Them
Even experienced users make mistakes when installing Xiaomi Mi TV 4S. Here are the most common:
- ❌ Ignoring the weight of the package: Many consider only the weight of the TV, forgetting that the box with the 65-inch model weighs almost 25 kg.
- ❌ Wrong. VESA: For example, buying a bracket 200×200 for 55-Inch TV (he needs it) 400×400).
- ❌ Savings on fasteners: Using screws instead of anchors or plastic dowels for heavy models.
- ❌ Unaccounted load on the shelf: The cabinet, designed for 20 kg, will not withstand the 50-inch Mi TV 4S (weight-weight) + soundbar + decoder.
To avoid problems:
- Always check the maximum load on the mounting and furniture (specified in the instructions).
- Use the level for a flat installation - a skew even by 2 ° can lead to a fall.
- Do not twist the bracket bolts "on the eye" - use a dynamometer key with a force of 10-12 N·m.
- After installation, check the TV for stability: slightly pull the upper corners. If it moved, strengthen the mount.
If you are in doubt, order the installation from professionals, the cost of the service is from 2 000 rubles, but it is cheaper than repairing a wall or TV after a fall.