Modern oral hygiene goes far beyond the standard brushing, and Xiaomi is actively introducing advanced technology into the segment. The irrigator is a device that has become a must-have for millions of people around the world, effectively removing food debris and plaque from interdental spaces that a regular brush cannot reach.
Users often wonder how to properly operate Mijia and Soocas ecosystem gadgets to avoid damaging the gums and get the maximum effect. In this article, we will examine all the nuances in detail, from the first charge and selection of nozzles to deep cleaning of the water supply system, you will learn how to adjust the ideal pressure mode and extend the battery life.
It's important to understand that ultrasonic cleaning and water jetting are different processes, although some models combine functions. Proper handling of the device ensures that microtraumas are not present in the gums and prevents inflammation. Let's move on to the specific steps of preparation and use.
Primary preparation and activation of the device
Once the box is unpacked, many users rush to turn on the device immediately, but this can lead to errors in the electronics, you first need to fully charge the battery, even if the indicator indicates the presence of energy, this is necessary to calibrate the lithium-ion battery, which is installed inside the housing.
Take a magnetic cable from the kit and plug it into the port on the back of the device. Pay attention to the position of the contacts: the magnets will stand up correctly themselves, but make sure the contact is tight. The charging indicator should light up or start flashing, signaling the process.
⚠️ Warning: Never try to charge the device if there is still water in the tank, and do not immerse the charging base in liquid.This can lead to short circuit and failure of the electronics.
After full charging, which usually takes 4 to 6 hours depending on the model, you can start the first start.A short press on the power button activates the device, and a long (about 3 seconds) can switch modes or block buttons from accidentally pressing in travel mode.
☑️ First launch of irrigation
Remember that some models, such as the Xiaomi Mijia WJ01, have special transport locks inside the water supply mechanism. These must be removed before first use, otherwise the pump may burn from overload.
Overview of major operating modes and settings
The brand’s modern irrigators offer a wide range of customizations to adapt the water jet to individual needs, and the basic is the standard mode, which provides the average pressure suitable for daily hygiene for most users.
For those who have sensitive gums or are just starting to use an irrigator, there is a mild regimen, and the water pressure is reduced, allowing the gums to get used to the new type of exposure without discomfort and bleeding, and you can gradually move to more intense settings.
- 💧 Soft: Minimum pressure for beginners and children.
- 💪 Standard: Optimal power balance for daily use.
- 🚀 Pulse: Intermittent stream for massage gums and improve blood circulation.
- 🦷 Clean (Deep Cleaning): Maximum power for remote plaque.
Switching between modes is done by short presses of the control button. In advanced models such as Soocas WP3, the current mode is displayed on the LED display or indicated by the color of the indicator, which allows you to visually control the cleaning process and avoid using too aggressive jet.
Technique of proper cleaning of the mouth
The effectiveness of the procedure depends on how you hold the device and direct the jet. Tilt the body of the irrigator above the sink at a 90 degree angle so that the water flows freely down. The tip should not rest on the gums, the optimal distance is 1-2 millimeters.
Start brushing your back teeth by moving along the gum line. Stay on each interdental space for 2-3 seconds. Pay special attention to the inner surface of the teeth, where plaque accumulates most actively. The whole process should take about 1-2 minutes.
💡
When cleaning, close your lips tightly, leaving only a small gap for the tip, which will prevent water from splashing throughout the bathroom and mirror.
Do not direct the jet perpendicular to the gums under high pressure, especially if you have inflammation. Movements should be smooth, sliding along the dentition. For best results, you can use special dental solutions (only those authorized by the manufacturer), diluting them with water in a ratio of 1:10.
| Parameter | Recommendation | Frequency |
|---|---|---|
| Water pressure | Start with the minimum | Every day. |
| Water temperature | Warm (35-40°C) | Every session. |
| Duration | 1-2 minutes | 1-2 times a day |
| Replacement of nozzle | New nozzle. | Every 3-6 months |
After the procedure is completed, the device will automatically shut down after 2 minutes (the timer function is available in most models). If you are finished earlier, press the power button manually.
Care, cleaning and maintenance of the system
Regular maintenance is the key to the long life of your Xiaomi Water Flosser. After each use, you need to rinse the tank and nozzle with running water. Once a week, it is recommended to conduct a deeper cleaning of all removable elements.
To remove mineral deposits (scale) that inevitably form when using hard water, you can use citric acid. Dissolve a few grams of acid in water, pour into the tank and run through the device for 30 seconds, then thoroughly rinse with clean water.
⚠️ Attention: It is strictly forbidden to use chlorine-containing bleach, hot water (above 60).°C) or abrasive cleaning products, which may damage plastics and sealing gums.
Pay special attention to silicone seals at the junction of the tank and the main part. If water or dirt gets there, the leakage can be broken. Rub these places with a soft dry cloth. Keep the device better in an upright position in a well-ventilated place.
What to do if the pressure of the jet drops?
Charging and battery operation
Autonomy is one of the key advantages of Xiaomi’s portable irrigators, which can take anywhere from 30 to 90 days to use a single charge depending on the model, but the actual operating time depends on the frequency of maximum pressure.
Use only the original cable or certified counterparts with similar current and voltage characteristics. Rapid charging from high-voltage smartphones can damage the power controller inside the irrigator if it doesn't support fast-charging protocol.
The battery indicator usually flashes red when the charge drops below 10-15%. At this point, it is better to put the device on charge. It is not recommended to keep the device completely discharged for a long time, as this can lead to a deep discharge of the battery and loss of its capacity.
- 🔋 Working hours: up to 60 days in standard mode.
- ⏱️ Charging time: average 4 hours.
- 🌡️ Temperature: Charge at a temperature of 0 to 40°C.
If you plan to not use the irrigator for a long time (for example, going on vacation), charge it to about 60-70% and turn it off.
Addressing common problems
During operation, users may encounter a number of typical situations that are not a failure, such as if the device makes unusual noise or the vibration seems too strong, check if the nozzle is tightly installed. Incorrect installation can cause resonance.
If the water is not supplied, although the pump is buzzing, there may be an air traffic jam in the system. Try turning the device on and off several times, pointing the nose into the sink to drive the air out. Also check the water level: some models do not start the pump if the reservoir is empty or water is critically low.
💡
Most irrigator “breakdowns” are due to a discharged battery, air traffic jams in the system or filter contamination, rather than to the failure of the electronics.
If you have an error (blinking a certain way), refer to the instructions of a particular Mijia or Soocas model. Often a series of blinks indicates a specific problem, from overheating the engine to the need to replace the nozzle.