Xiaomi phones support NFC: full list of models for 2026

Introduction: why you need NFC in Xiaomi smartphones

NFC (Near Field Communication) technology has long ceased to be exotic β€” today it is built into most modern smartphones, including the Xiaomi, Redmi and POCO lines. With its help, you can not only pay for purchases contactlessly through Google Pay or Mi Pay, but also quickly transfer files, connect to smart devices or even use a phone instead of a pass in the office. However, not all Xiaomi models are equipped with this module β€” especially for low-end devices, where the manufacturer saves on β€œnon-critical” functions.

If you are planning to buy a new smartphone and contactless payments are important for you, it is important to know in advance whether the chosen model supports the use of the device. NFC-In this article, we have collected the current list for 2026 of all Xiaomi phones with a NFC, We've taken a look at the nuances of how the technology works on different firmware and given you instructions on how to check for a module on your device. NFC Google Pay is not working and how to fix it.

How NFC works in Xiaomi phones: technical features

Module NFC In smartphones Xiaomi is usually represented by a chip from NXP (for example, PN547 or PN80T) These chips support all the basic standards of contactless communication: ISO 14443 (for payments), ISO 15693 (for labels) and ISO 18092 (for data exchange between devices). NFC-The chip does not yet guarantee support for Google Pay – a lot depends on firmware and certification.

In Xiaomi phones, the NFC module can work in three modes:

  • πŸ’³ Emulation of the card – for contactless payments (Google Pay, Mi Pay, banking applications).
  • πŸ“± Reading/Write--for working with NFC-tags and other devices (e.g., smart locks).
  • πŸ”„ Peer-to-Peer – for data exchange between two phones (for example, via Android Beam).

One of the key points is the certification of Google Mobile Services (GMS). Without it, even if it's available. NFC-For example, some global versions of Xiaomi (especially for the Chinese market) may not support Google Pay. GMS, It also has to be considered that in budget models (e.g. Redmi). 12C) NFC Often absent at all, despite similar characteristics to the flagships.

πŸ’‘

If you buy Xiaomi on AliExpress or in Chinese stores, check with the seller the firmware version. CN) They are often not certified for Google Pay, even if they are physically NFC-chip.

Xiaomi’s full list of NFC phones in 2026

Below is a table with current Xiaomi, Redmi and POCO models that support NFC. Data is verified based on official specifications and user tests. Please note: some models may have regional limitations (for example, NFC is in the global version, but not in the Chinese one).

BrandModelYear of releaseSupport for Google PayNotes
XiaomiXiaomi 14 / 14 Pro / 14 Ultra2023βœ… Yes.NXP PN80T chip, UWB support
XiaomiXiaomi 13T / 13T Pro2022βœ… Yes.In the Chinese version (CN) Google Pay is not working.
RedmiRedmi Note 12 Pro+ 5G2023βœ… Yes.Only in the European and Global Versions
RedmiRedmi Note 11 Pro+ 5G2022βœ… Yes.The Indian version (IN) of NFC is missing.
POCOPOCO F5 Pro2023βœ… Yes.Redmi K60 analogue with NFC

The full list of NFC models also includes:

  • πŸ“± Xiaomi 12/12 Pro/12S Ultra (2022)
  • πŸ“± Xiaomi 11T/11T Pro (2021, except for the Indian version)
  • πŸ“± Redmi Note 10 Pro (2021) - Global Edition)
  • πŸ“± POCO X5 Pro 5G (2023)
  • πŸ“± Black Shark 5/5 Pro (2022, gamer)
πŸ“Š Which Xiaomi brand do you prefer?
Xiaomi
Redmi
POCO
Black Shark
Other

Important: In models for the Chinese market (with the CN suffix), NFC is often blocked for payment systems due to local regulatory requirements.For example, the Xiaomi 13 Pro CN physically has a chip but does not support Google Pay.

How to Check if There Is NFC in Your Xiaomi Phone

If you’re not sure if your smartphone is equipped with an NFC module, there are several ways to check it out:

  1. Through Android Settings: Go to Settings β†’ Connections and Sharing β†’ NFC. If there is no partition, there is no module.
  2. Device Manager: Install CPU-Z or AIDA64, open Sensors or Connections, and NFC will confirm the presence of the string.
  3. Physical inspection: On some models (e.g. Redmi Note 11) NFC-The antenna is located under the top of the back cover, and you can light it carefully with a flashlight, and sometimes you can see the contours.

If you have NFC in your settings but it doesn’t work, try:

Reset network settings (Settings β†’ System β†’ Reset β†’ Reset Wi-Fi, mobile network and Bluetooth)

Update the firmware to the latest version of MIUI

Check if the NFC is blocking a case or sticker

Install the application NFC Tools for testing-->

If the module is missing, but it is critically important – consider buying an external one. NFC-Adapters (e.g. Sony) RC-S380), plug-in USB-C. Please note that these devices do not support Google Pay.

Why NFC may not work even if it does: common problems

Even if your Xiaomi is equipped with NFC-If you use a chip, you may encounter problems when trying to use contactless payments or other features:

⚠️ Note: If you bought your phone in China or on AliExpress, there is a good chance that the firmware is not certified for Google Pay. MIUI Payments will not work – you will need to unlock the bootloader and install custom firmware (for example, Pixel Experience), which voids the warranty.

1. Regional firmware restrictions

Many Xiaomi models are available in several versions:

Global (EEA) – for Europe, with support for Google Pay.

India (IN) – often without NFC or with reduced features

China (CN) – without GMS certification, even if the chip is physically present.

2. Conflict with other applications

Some banking applications (such as Sberbank Online or Tinkoff) may block NFC for other services, and there are also problems with:

  • πŸ›‘οΈ Antiviruses (e.g. Kaspersky or 360 Security).
  • πŸ”„ Battery Optimizers (Switch Off Background Processes) NFC).
  • πŸ“± Card cloning apps (can "take" control of a chip).

Hardware malfunctions

NFC-The antenna may be damaged by a fall of the phone or after unskilled repairs (e.g., battery replacement or back cover).If the module stopped working after repair, check:

  • πŸ”§ Integrity of the antenna plume (it goes from the motherboard to the upper part of the body).
  • πŸ”‹ The battery is installed correctly – sometimes it presses on the antenna.
  • πŸ› οΈ The presence of metal elements in the case (they shield the signal).
What if NFC stopped working after MIUI update?
After some updates (e.g., switching from MIUI 13 to MIUI 14), permissions for NFC may be reset. Try: 1. Go to Settings β†’ Applications β†’ Permissions Management β†’ Additional β†’ NFC and enable all permissions. 2. Clear the cache of the NFC Service application (Settings β†’ Applications β†’ All Applications β†’ NFC Service β†’ Memory β†’ Clear Cache). 3. If it didn’t work, roll back to the previous firmware version via the Mi Flash Tool (requires an unlocked bootloader).

Xiaomi, Redmi and POCO NFC Comparison: Which is Best for Payments

If your primary goal is contactless payments, not all Xiaomi phones are equally good.

1. Flagship models (Xiaomi 13/14 series)

They use the most advanced UWB-enabled NXP chips, which speeds up connection to terminals, and they also offer hardware-based payment data protection (Titan M2-like security chips), minus the high price tag.

Mid-segment (Redmi Note 12 Pro+, POCO F5 Pro)

NFC is available, but chips are simpler (like NXP PN547). Google Pay support is stable, but there may be delays (up to 1-2 seconds).

Budget models (Redmi 12C, POCO M5)

Most often, NFC is absent. If there is one (for example, in the Redmi Note 11 for Europe), then the chip is weak, and payments can β€œglutch” at some terminals.

CriteriaXiaomi (flagships)Redmi (middle segment)POCO (Games/Budget)
Speed of payment⚑ Instantly.🐒 1-2 delay❌ Often unstable
Support for UWBβœ… Yes.❌ No.❌ No.
CostπŸ’° From 60,000. β‚½πŸ’° 20 000–40 000 β‚½πŸ’° 15 000–30 000 β‚½

For most users, the best choice is the Redmi Note 12 Pro+ or POCO F5 Pro models, which offer stable NFC at an adequate price. If you want maximum speed and security (for example, for corporate passes), you should consider Xiaomi 14 flagships.

πŸ’‘

Any Xiaomi with NFC from the global version (with the Global or EEA suffix) will be suitable for contactless payments via Google Pay. The Chinese version (CN) requires flashing, which is not always safe.

NFC in Xiaomi for smart home and other tasks

Contactless payments are not the only application of NFC. In the Xiaomi ecosystem, the technology is actively used to:

1. Control of smart devices

With help. NFC-tags (Xiaomi) NFC Tag) can automate routine activities:

- 🏠 Attach the phone to the tag at the door - the light will turn on, the robot vacuum cleaner will start.

- πŸš— Touching the tag in the car – will turn on Bluetooth, start the navigator.

- πŸ›οΈ The tag on the bedside table - will put the phone in silent mode and turn on the alarm clock.

You will need the Mi Home app and the tags themselves (stand for it). ~300 β‚½ piecewise).

Rapid data transmission

Fast Pair (in newer models) allows you to instantly connect Xiaomi headphones, speakers or fitness bracelets with a simple touch, and you can transfer contacts, links or small files (up to 1 MB) between phones via NFC.

3. Identification and security

Some models (such as the Xiaomi 13 Ultra) support:

  • πŸ” NFC-Keys for office passes (standard) MIFARE).
  • πŸš— Virtual car keys (compatible with the BMW, Hyundai).
  • πŸ₯ Electronic health records (in countries with eHealth support).

⚠️ Note: Office passes or car keys require special software from the access control system manufacturer. Standard Android applications (like the one in the car) NFC Tools won't do this.

FAQ: Frequent questions about NFC in Xiaomi phones

Can I add NFC to Xiaomi if I don’t?
Physically set up NFC-It's impossible to have a chip in your phone without it -- it requires soldering of the motherboard: πŸ“± Use externally NFC-adapter (connected through the USB-C, but does not support payments). πŸ’³ Purchase a separate banking terminal (e.g. SberPay Terminal) to accept payments. NFC It is easier to sell your current phone and buy a model with support (for example, Redmi Note 12 Pro).+ Redmi instead 12C).
Why Google Pay doesn’t work on Xiaomi with NFC
The reasons may be: The firmware is not Google certified (typical for Chinese versions), the phone is rooted or custom firmware is installed. The security settings disabled the Pay Through option. NFC. Bank does not support card tokenization for your device: πŸ”„ Update Google Play Services and Google Pay to the latest version. πŸ“± Refuse the phone to the global version MIUI (riskyly!). πŸ’³ Add a card through a banking app (e.g. SberBank Online) rather than Google Pay.
Which Xiaomi NFC is the cheapest in 2026?
In June 2026, the most budget models Xiaomi with NFC: πŸ“± Redmi Note 11 Pro+ 5G (global version – from 18,000 β‚½. πŸ“± POCO X5 Pro 5G β€” from 22,000 β‚½ (discount). πŸ“± Xiaomi 11 Lite 5G NE β€” 20,000 β‚½ (Beware of counterfeits! Check the model on Xiaomi's official website or through IMEI.info before buying.
Can I use Mi Pay instead of Google Pay?
Mi Pay is Xiaomi's own payment system operating in China, which is not supported in Russia and Europe: πŸ’³ Google Pay (works on global versions) MIUI). 🏦 Banking applications (Sberbank, Tinkoff, VTB) with support for Host Card Emulation (HCE). πŸ“± Samsung Pay (if you switch to Samsung) Mi Pay is popular in China because of its integration with WeChat Pay and Alipay, but it is useless outside the country.
Does NFC affect battery consumption?
On his own. NFC-The chip consumes a minimum amount of energy (about one-third of the time). 5-10 (a) In active mode: πŸ”‹ If Android Beam or background tag scanning is enabled, the cost may rise. πŸ“± Some firmware MIUI aggressively optimize NFC, So, what's going on in the background, and it's going to shut down in the background. NFC, When you don't need it, you can't auto-run applications that use it. NFC (So, for example, Mi Home. Update the firmware in new versions. MIUI optimized energy consumption.