How Xiaomi Redmi 6 looks like: design, materials and visual features

Xiaomi Redmi 6

2018

Redmi

Xiaomi

In this article, we will take a closer look at the Redmi 6’s design, dimensions, body materials, color options, and even the nuances that will help distinguish the original from the fake. J4 Huawei Y6.

Just note: the appearance of Redmi 6 It depends a lot on the modification. 6A It has a more simplified design, and Redmi has a more simplified design. 6 Pro — notch in the screen (the so-called "frack"). In this article we will talk about the base model of Redmi. 6 (M1803C6DG/M1803C6DT).

Why does it matter? Because even in the ads, they often confuse these models by giving them the same name. 6A If you want to avoid being cheated, read on, and we'll show you what to look for first.

Dimensions and weight: compactness as the main advantage

Xiaomi Redmi 6 It is a small smartphone, which is rare even in the 2018 And the year that manufacturers were actively expanding the screens was when they were actually making a big difference. 147,5 × 71,5 × 8,3 Mmm, and the weight is everything. 146 For comparison: modern public sector workers like Redmi. 12C weight 20–30 gram more with similar dimensions.

These options make the phone easy to use one-way: it is easy to hold in one hand, and due to its light weight, it does not tire the wrist with prolonged retention. However, there is a downside: due to its compactness, the manufacturer had to sacrifice battery capacity (only 3000 mAh versus 4000-5000 mAh from competitors).

Interesting fact: the thickness of the Redmi 6 body - 8.3 mm - was a record for budget smartphones of the time. J4 It was 9.5 mm thick and Huawei was Y6 2018 — as much as 11.2 mm. This was achieved by using a plastic case without metal inserts.

If you are used to modern “bricks” with a diagonal of 6.5+ Inches, Redmi 6 will seem miniature, but for its time, it was standard size — the screen here is 5.45 inches with an aspect ratio of 18:9 (the so-called “full-screen” format, which was just beginning to replace the classic 16:9).

Materials of the case: plastic vs metal

The Xiaomi Redmi 6 is made entirely of matte plastic, which is typical for budget models. However, designers have tried to make it visually similar to metal: the back panel has a metallized coating with barely noticeable shine, and the ends are edged with a glossy strip that mimics aluminum.

Advantages of this solution:

• 🔹 Lightness: Plastic weighs less than metal, which contributes to the overall weight reduction of the device.
• 🔹 Scratching resistance: matte surface less noticeably stained and not as scratched as glossy metal.
• 🔹 Best communication signal: Plastic doesn’t shield antennas, unlike metal cases (like iPhone or Meizu).

But there are downsides:

• ⚠️ Less premium: Despite imitating metal, plastic still feels like plastic.
• ⚠️ Proneness to scuffing: Over time, metallized coatings can wear off, especially at the edges.
• ⚠️ Low thermal conductivity: under intense load (games, video editing), the body heats up unevenly.

One important thing is that the Redmi 6's back is not removable, despite what looks like a separate lid, and it's a monoblock, and trying to remove it will break the latches.

Color options: from classics to experiments

Xiaomi Redmi 6 was released in 5 official colors, each of which had its own characteristics:

1. Black (Black) - the classic version with a matte coating, the least stamps.
2. Gold is a glossy back panel with metallic gloss, a popular choice among women.
3. Blue is a deep dark blue hue with a barely noticeable gradient.
4. Pink (Rose Gold) is a delicate pink color with a pearl effect, rare on sale.
5. Red is a bright glossy shade, released in a limited series.

The most common options in the secondary market are black and gold, blue and pink are less common, and red is a real rarity, which can cost 10-15% more than the standard versions.

Interestingly, the color of the frame around the screen depends on the version:

• 📱 In black and blue models, the frame is black.
• 📱 In gold and pink – white (which visually increases the screen).
• 📱 In the red version, the frame is dark red, harmonizing with the body.

When buying used devices, pay attention to the uniformity of color: often fakes or repainted phones have spots or shades different from the original.

Location of elements: buttons, connectors and cameras

The Redmi 6 design follows the classic Xiaomi layout of the time, but with a few unique details.

Beam panel:

• 📞 Speaker – located above the screen, to the left of the front camera.
• 📷 Front camera – 5 MP, centered above the display.
• 🔄 Sensors and LED - to the right of the camera (acceleration, illumination, notifications sensor).
• 🔘 Navigation buttons are software (on the screen), but gestures can be enabled in the settings.

Side edges:

Back panel:

• 📸 Dual camera – 12 MP (main camera) + 5 MP (depth), located vertically in the upper left corner.
• 🔦 LED flash - between cameras, brightness 4000K.
• 🎵 Redmi logo - in the center, made by laser engraving.
• 👆 Fingerprint scanner – on the back, under the camera (in some regions not available).

Note that the fingerprint scanner is not available in India and some Asian countries, but only face unlock, which is important to consider when buying from Romanian or Chinese sites.

Display: frames, oleophobic coating and "brows"

Redmi screen 6 — it IPS-diagonal 5,45 resolution 1440×720 pixel (HD+). The density of the points is 295 PPI, It's a very clear picture, but it's not a record-breaking detail. 5 That same year, the density was 403 PPI.

Screen features:

• 🔳 18:9 aspect ratio is an elongated format that was just beginning to gain popularity.
• 🖥️ The upper and lower frames are approximately the same width (~1 cm), side - minimal.
• 🌈 Color rendering – slightly “cold” out of the box, but adjusts to Settings → Screen. → Color mode.
• 👆 Oleophobic coating - medium quality, quickly wears off (after 3-6 months).

The important point is that the Redmi 6 doesn't have a "bangs" in the screen, unlike the Redmi 6 Pro. If you see a smartphone with a cut on top, you have a different model! Also pay attention to the rounded corners of the screen - this is the corporate style of Xiaomi from that period.

When buying a used device, check the display for broken pixels and yellow spots (a common problem). IPS-Matrix after 2-3 years of use. To do this, run the test in the engineering menu:

##6484##

💡

To check for oleophobic coatings, swipe your finger over the screen off, and if there are any greasy marks, the coating has worn off, and you'll have to wipe the display more often.

How to distinguish the original from the fake in appearance

Xiaomi Redmi 6 fakes are less common than flagship models, but they still exist. Here are 5 visual signs that can be used to recognize the original:

1. Logo and inscriptions

• ✅ Original: Redmi logo on the back is laser engraving, does not erase.
• ❌ Fake: logo pasted or painted with paint (may peel off).

2.Cameras

• ✅ Original: dual camera is strictly vertical, without distortions.
• ❌ Fake: Cameras can be offset or have different lense sizes.

3. Connectors and buttons

• ✅ Original: micro-USB connector has a metal edging, power and volume buttons - a clear stroke.
• ❌ Fake: plastic connector, buttons backlash or fail.

4. Packaging

• ✅ Original: a box of dense cardboard with a hologram Xiaomi and serial number.
• ❌ Fake: The box is thin, without holograms, often with typos in the text.

Fonts and markings

• ✅ Original: The serial number on the battery sticker begins with M1803.
• ❌ Fake: The serial number is short or consists of random characters.

If you are in doubt, check it out. IMEI devices on the official Xiaomi website or through the team:

*#06#

Comparison with other models: Redmi 6 vs 6A vs 6 Pro

People often confuse Redmi 6 with its siblings» — 6A And 6 Pro. Let's see how they differ in appearance:

How fast can I tell?

• 🔍 Redmi 6A — No fingerprint scanner, single camera.
• 🔍 Redmi 6 Pro – there is a “brow” (cut in the screen), the display is more.
• 🔍 Redmi 6 – dual camera, fingerprint scanner (in most versions), no notch.

If the vendor claims that the Redmi 6 has a bang or that it's a "pro-version," you're either cheating or incompetent. Always ask for a photo of the back and screen!

💡

The main difference between Redmi 6 and 6A — It has a dual camera and a fingerprint scanner, and it's different from the 6 Pro, it's not banging and it's smaller.

FAQ: Frequent questions about the appearance of Xiaomi Redmi 6

⚠️ Warning: If you buy a Redmi 6 with your hands, be sure to check the condition of the body for cracks near the camera and the charging connector. Plastic becomes brittle over time, and even a small fall can lead to hidden damage!

⚠️ Note: Some vendors give Redmi 5 for Redmi 6. The difference is simple: Redmi 5 has a 5.7 screen, 16:9 aspect ratio (rather than 18:9), and the camera is located in the corner, not in the center of the top.