Xiaomi Redmi 10
appearance
Many users choose Redmi 10 not only for its technical characteristics, but also for its stylish, but at the same time practical design. The smartphone is not positioned as a flagship, but its appearance stands out from the competition in the same price segment. Let's understand what makes it visually attractive and easy to use.
In this article, you will find not only descriptions, but also comparisons with other Xiaomi models, as well as tips for choosing colors and ergonomics. If you already own a Redmi 10, you may find new details that you have not paid attention to before.
Design and materials of the case: plastic or glass?
The Xiaomi Redmi 10 is made of matte plastic, which is a typical solution for budget smartphones. It is an inexpensive but practical material that has several advantages:
- 🔹 Resistance to scratches – matte surface less noticeably stained and not as much slides in the hands as glossy glass.
- 🔹 Lightweight – the weight of the device is only 181 g, which makes it comfortable for long-term use.
- 🔹 Durability – plastic is less brittle than glass, so the smartphone can withstand light falls without serious damage.
On the other hand, plastic is perceived as less premium than glass or metal. If you want to have "expensive" tactileness, you should consider the POCO or Mi models, which use more expensive materials. However, for its price category, the Redmi 10 looks quite decent.
The back panel has a textured surface that is pleasant to the touch and prevents slipping. The side faces are slightly rounded, which improves ergonomics. On the front, the smartphone is protected by hardened glass Gorilla Glass 3, which is resistant to small scratches, but will not save from heavy impacts.
⚠️ Note: Despite the body strength, the Redmi 10 does not have official water and dust protection as standard. IP68. A hit of liquid or sand can cause the device to fail.
Size and ergonomics: Is it comfortable to hold in one hand?
Xiaomi Redmi 10 belongs to the category of compact smartphones with a screen diagonal of 6.5.” Its dimensions are:
- 📏 Height: 161.95 mm
- 📏 Width: 75.53 mm
- 📏 Thickness: 8.92 mm
This makes it easy for the smartphone to sit in your hand and the rounded edges don't cut your hand for long periods of time, but the big screen can make it difficult to reach the top edge with one hand, which is where you can use a one-handed mode that you can activate in settings.
For comparison, the Redmi Note 10 is thicker (8.29 mm) and heavier (178.8 g), but it has a metal frame, which adds premium. If you want maximum lightness, the Redmi 10 will be preferred.
Xiaomi Redmi 10 Colors: Which One to Choose?
The smartphone is available in four main colors, each of which has its own characteristics:
| Colour | Description | Features |
|---|---|---|
| Carbon Gray (Coal Grey) | Classic dark shade with matte coating | Less than a brand, suitable for business style |
| Pebble White (White Pebbles) | Light color with pearl tint | Visually increases the smartphone, requires careful handling |
| Sea Blue (Sea Blue) | Deep blue with gradient effect | The most popular option, looks stylish and youthful |
| Aurora Green (Green Aura) | Green with overflows, resembling the Northern Lights | Rare color, attracts attention, but not everyone likes it |
If you prefer universal solutions, choose Carbon Gray, which is less dirty and fits any case. For those who like brightness, Sea Blue or Aurora Green is perfect. Pebble White looks elegant, but it is more visible scratches and fingerprints.
Important: In some regions, the color Aurora Green may not be available for sale - check the availability of official dealers.
Location of buttons and connectors: where is it?
The Redmi 10's ergonomics are designed to keep all the controls at hand, and here's how the main components are arranged:
- 🔘 Power button + The fingerprint scanner is on the right side, just above the middle.
- 🔊 Volume buttons – also on the right side, right under the power button.
- 📶 Tray for SIM-The map is on the left side. It supports 2 nano-SIMs. + microSD.
- 🔌 Connector. USB-C — downtown, next to the microphone and speaker.
- 🎧 3.5 mm audio jack - in the upper part (rare for modern smartphones!).
Note that the fingerprint scanner is built into the power button — it's convenient, but it's addictive. Some users note that the sensor sometimes works with a delay, especially if the finger is wet.
On the back panel are:
- 📷 The main camera is a vertical block with four lenses (although only three actually work).
- 💡 LED flash - to the right of the camera.
- 📻 Redmi logo - at the bottom, not striking.
⚠️ WARNING: When using a magnetic-mounted case (such as for a holder in a car), make sure the magnet doesn't close the area next to the camera - this can affect autofocus.
Power button not backing up |Fingerprint scanner works clearly |The USB-C connector doesn't stagger |Dynamics don't wheez at maximum volume-->
Screen: frame, cutout and protection
Redmi Display 10 technologized IPS LCD permittingly FHD+ (2400 × 1080) pixel density 405 PPI. The screen takes over 83.7% The front panel, which provides minimal bezels on the sides, and the top is a drip notch for the front camera, which does not interfere with viewing content.
The screen has a brightness of up to 400 nits (maximum 450 nits in HBM mode), which is enough for comfortable use outside in sunny weather. However, when directly exposed to sunlight, the image can “burn out” – in such cases, it is recommended to increase the brightness manually.
The glass is protected by Gorilla Glass 3, but that doesn't mean the screen is invulnerable. If you fall on asphalt or concrete, there's a high probability of cracks. If you drop your smartphone a lot, you'd better buy a tempered glass or a case with a reinforced side.
💡
To check the quality of the oleophobic screen cover, swipe your finger over the surface: if there are greasy traces, the coating is already worn out and it is time to apply a new one.
Comparison with other Xiaomi models: what has changed?
If you compare the Redmi 10 with its predecessor – Redmi 9, the following changes in appearance are noticeable:
- 🔄 The camera unit has become larger and now includes four circles (although one of them is decorative).
- 🎨 Colors – Aurora Green is new, and the old Sunset Purple is removed.
- 📱 Screen – the notch for the camera has become smaller, and the frames have narrowed to ~10%.
- 🔋 The back panel is now completely matte, without glossy inserts.
Compared to the Redmi Note 10, which is in the higher segment, the differences are even more noticeable:
- 💎 Materials – Note 10 has a glass back panel and a metal frame.
- 📏 Thickness – Note 10 thinner by 0.6 mm.
- 🔊 Speakers - stereo sound only in Note 10 (Redmi 10 monodynamics).
If you’re looking for premium, it’s best to take a closer look at the Note series, but if you want a reliable and inexpensive smartphone, the Redmi 10 is a great choice.
Why does Redmi 10 have four cameras and only three?
Covers and accessories: what is right for Redmi 10?
Due to the popularity of the model, a huge number of accessories are produced for the Redmi 10:
- 🛡️ Cases ranging from thin silicone to armored with shock protection.
- 🔋 Protective glass - it is better to choose with a coating 9H oleophobic.
- 🔌 Chargers - the set comes with an adapter for 18 watts, but the smartphone supports 33 watts (you will have to buy separately).
- 🎧 Wireless headphones – any Bluetooth headset will do, but for better compatibility, choose Xiaomi models (for example, Redmi Buds 3).
When choosing a case, consider that some models may overlap the microphone or infrared port (located at the top).If you often use the remote for equipment, make sure that the case has a corresponding notch.
For those who like personalization, there are skins (vinyl stickers) with different prints, which not only change the appearance, but also provide additional protection from scratches.
💡
The original Xiaomi accessories for Redmi 10 can be found by the articles starting with KB (cases) and GA (glasses).