The mobile market is oversaturated with copies of popular models, and the Redmi Note 10 Pro is no exception.This model, released in 2021, is still in huge demand due to its value for money ratio, which attracts unscrupulous sellers.
Distinguishing a quality clone from the Xiaomi Redmi Note 10 Pro is not easy, as counterfeiting technologies have advanced so far, can look almost identical, have similar logos and even repeat the system interface, but the internal hardware, quality of materials and software always betray fraudsters.
In this article, we will take a look at all the ways to verify your device, from simple visual checks to deep analysis of system logs. You don’t need to be an electronics expert to protect yourself from buying counterfeits, follow our instructions carefully enough, and use proven diagnostic tools.
Visual analysis of the body and configuration
The first thing that catches your eye when inspecting a suspicious device is the build quality.The original Xiaomi is famous for its high production standards, so any gaps between the screen and the frame, backlash buttons or unevenly applied glue should alert. On the back of the original, the Redmi logo is clearly marked, without lubricated edges and is always strictly in the center.
Pay close attention to the camera. The Redmi Note 10 Pro uses a 108MP module that physically takes up a significant amount of space. Fakes often install cheap 8MP or 13MP sensors, masking them as a huge camera, or the additional lenses are simply decorative plugs. The camera glass must be level with the body or have a minimum protrusion characteristic of the original.
⚠️ Note: If you see that the tray is for SIM-The card is irregularly shaped, skewed or lacks the necessary contact areas, and you see a clear forgery. The original Xiaomi trays are always engraved with the model number.
The kit can also tell you a lot about the origins of the smartphone: The original box is made of dense cardboard with clear printing, and the barcodes on it must match those on the sticker at the bottom of the device. Inside the original Redmi Note 10 Pro box, there is always a USB Type-C cable, a protective case and a clip to extract the tray.
Verification of the unique IMEI identifier
The most reliable and quickest way to do initial verification is to analyze the International Mobile Equipment Identifier, or IMEI. This code is assigned to each device in the factory and is its digital passport. On the original Xiaomi Redmi Note 10 Pro IMEI, you can find it in several ways: on the box, under the battery (if it were removable, but here it is under the back cover), and in the system interface itself.
To get the code through the engineering menu, type *#06# on the phone keyboard. After that, one or two IMEI numbers will appear on the screen. These numbers must be exactly the same as those indicated on the factory sticker on the back of the box. Any discrepancy even in one digit indicates that the device is either assembled from different parts or is a fake.
The code you get is checked on the official Xiaomi portal. Go to the manufacturer's website in the warranty check section and enter your number. The system will give information about the model, color, activation date and warranty status. If the site says "IMEI not found" or shows a model other than the Redmi Note 10 Pro, for example, some budget button phone, then you are trying to cheat.
☑️ Verification IMEI
Analysis of the software shell and MIUI
Software is the Achilles' heel of most fakes. Chinese craftsmen have learned to copy visual style. MIUI, But the functionality is often stripped down or changed. In the original Redmi Note 10 Pro, the interface runs smoothly, animations are not interrupted, and the system fonts look clearly on the front end. AMOLED-Copies often show twitchy menus and unnatural fonts.
Go to the device settings and select About. Here you need to carefully study the version of MIUI and Android. The original smartphone should run on Android 11 (with the possibility of upgrading to newer versions) and have a MIUI shell of 12, 13 or later, depending on the region. If you see Android 8 or 9, or a version of MIUI that does not exist in nature, it is fake.
Pay special attention to pre-installed apps. The global firmware version must have Google Play services that work consistently. Fakes often install modified versions of app stores that may not open or require strange permissions. Also, the original About Phone menu, when you repeatedly click on the MIUI logo, starts animation, while copies of this effect do not.
Hidden tests of an engineer
Detailed verification of technical specifications
The claimed features of the Redmi Note 10 Pro include a Snapdragon 732G processor, 6 GB of RAM and a 128 GB drive. Fakes often use old and weak MediaTek processors, which are software masquerading as Snapdragon. To see the real picture, it is not enough just to look at the settings, since there the data can be changed.
Use specialized diagnostic tools such as CPU-Z, AIDA64 or Device Info HW. These applications read information directly from chips, and it is extremely difficult to fool them. In the original, you will see 8 Kryo 470 cores with a frequency of up to 2.3 GHz. If the program shows the Cortex-A53 cores or an unknown chip manufacturer, you have a copy.
Special attention deserves the screen. Redmi Note 10 Pro is equipped with high-quality AMOLED-resolution-matrix 2400x1080 pixels and refresh rate of 120 Hz. Counterfeiting is often equipped with cheap IPS-low-resolution screens (HD+), And you can test this by turning on the white image at maximum brightness. AMOLED The black pixels do not glow at all, but IPS will be markedly gray.
Below is a table comparing the key characteristics of the original and typical forgery:
| Characteristics | Original Xiaomi | Typical forgery |
|---|---|---|
| Processor | Snapdragon 732G (8 cores) | MediaTek Helio P60/P35 (8 cores) |
| Screen. | AMOLED, 120Hz | IPS, 60 Hz (interpolated) |
| Camera. | 108 MP (Samsung HM2) | 8-13 MP (interpolation) |
| RAM memory | 6GB/8GB LPDDR4X | 2 GB/4 GB (showns 6-8 GB) |
| Charging. | 33 W (fast) | 10 W (standard) |
💡
Real-world characteristics can always be checked through third-party diagnostic applications that read data directly from the hardware, ignoring software changes to the system.
Testing of the camera and shooting quality
The camera is one of the Redmi Note 10 Pro’s great trump cards, and that’s where the gap between the original and the copy is most noticeable. The 108MP main sensor allows you to take detailed pictures even at digital zoom. Counterfeits, even if they claim high resolution, actually take photos with a resolution of 0.3-2 MP, which are programmatically zooming in, losing all clarity.
Check the night mode and macro. The original smartphone has a separate macro lens of 5 MP, allowing you to focus at a distance of 3-7 cm from the object. In copies, the macro module is often missing or is a dummy stub, and focusing only from a long distance. Also pay attention to the focus speed: the original focuses instantly, the copy can “scour” for several seconds.
⚠️ Note: If you are trying to record a video in 4K The camera makes an error or records a video without sound and with artifacts, this is a sure sign of a fake sensor that is not able to process large data streams.
For a deeper analysis, you can use the Open Camera app or the standard Pro camera app. Look at the available ISO values and shutter speeds. The original Samsung HM2 sensor has a wide dynamic range and supports native ISO, while cheap sensors in fakes have a very narrow range of sensitivity.
Additional diagnostic methods
There are a few other things that will help you to be sure that the device is authentic: Pay attention to the speed of the fingerprint scanner built into the on button. In the Redmi Note 10 Pro, it works almost instantly. In fakes, it often uses imitation: the phone unlocks on the face or just on a timer, creating the appearance of the scanner.
Check the support for fast charging. The original 33W power supply charges a 5020 mAh battery in about an hour. Connect the phone to the original charger: the MI Turbo Charge logo should appear on the screen. If it shows just Charging or Quick Charging without Xiaomi's proprietary animation, it's possible the power controller in the device isn't original.
💡
Try running a heavy game or benchmark like AnTuTu. The original Redmi Note 10 Pro scores around 300,000 to 340,200. If it's below 100,000, it's not the original hardware.
It is also worth checking the presence NFC If you're planning to use contactless payment, there is one in the global versions, there may be none in the Chinese versions. NFC It is often stated in specifications, but physically absent from the device, and you can check this by trying to count a bank card through the Google Pay app or any other device. NFC-reader.