How to find and choose a case for headphones Xiaomi Basic 2

Losing a wireless headphone charger case is a common and extremely unpleasant situation that many gadget owners face. It is especially frustrating when the headphones themselves are intact, work properly, but it is impossible to use them for their intended purpose due to the lack of space for charging. Xiaomi Redmi Buds Basic 2 (often called simply Basic 2) is one of the most popular in the budget segment, but it is more difficult to find a separate accessory for it than for the flagship versions.

In this article, we will discuss in detail all the available ways to find an original or compatible case. Charging box is not just a container, it is a complex electronic device with a power controller, so simply replacing the box from another model will not work. You will need to find exactly the specification that matches the charging protocols and dimensions of your headphones.

We'll look at the official communication channels with the manufacturer, the proven marketplaces and the compatibility check methods. It's important to understand that the accessories market is full of offers, but the original case Mi True Wireless Earbuds Basic 2 has a unique serial number and specific markings on the bottom, ignoring which can lead to the purchase of a substandard copy.

Model identification and compatibility of cases

The first thing to do before searching is to accurately identify the model of your headphones. Xiaomi Basic has several modifications, including the Lite, S and Pro versions, which may look very similar but have different seating geometries. If you try to insert Redmi Buds Basic 2 headphones into the case from the first version (Mi True Wireless Earbuds Basic), they may simply not close or, worse, the charging contacts will not match.

Note the labeling on the inside of the lid or on the bottom of the case, if you have at least some of it, often with a model number like TWSEJ06LS or similar code, which is the key to the search. The manufacturer's specifications also specify the type of connector; in this case, it's a classic Micro-USB, which distinguishes this model from the newer versions of Type-C.

Compatibility is critical. Even if the case physically closes, the power controller inside may not recognize the headphones, which will cause the light to burn, but it won't charge, so when you search on sites like AliExpress or Ozon, be sure to check the photos of the interior space with your device.

• 🔍 Check the exact model name in the Mi Home app or on the headphone box.
• 🔍 Compare the location of magnets and charging contacts inside the case with photos of the product.
• 🔍 Make sure the charging connector type (Micro-USB) matches the original.

Where to look for the original case: official and alternative ways

Finding the original accessory is not an easy task, since Xiaomi rarely sells charging cases separately from the headphones themselves in retail packaging. However, there are proven ways. The first thing to do is contact authorized service centers Xiaomi Service Center. Even if the product is not available, the masters can order the necessary part or give the code of the part to order from partners.

Chinese marketplaces like AliExpress offer a wide range of both original and restored cases, and it's important to look at seller ratings and photo reviews. Often sellers will put the phrase "Original Case" in the product name, but in practice they will send a copy, distinguished by plastic quality and weight: the original is always heavier because of the larger battery and quality board.

And then you have to look at local ad platforms like Avito or Yula, and people often sell headphones when they lose one of their ears, and they don't have a case, and it's a great chance to buy an original part at a low price, and the key is to arrange a meeting to check the performance.

⚠️ Warning: When buying a used case, be sure to check the status of charging pins (contacts) inside. Oxidation or squashed contacts will make the case useless, even if it looks new from the outside.

Xiaomi's dedicated forums and tech communities are not to be ignored, where users often share links to trusted parts suppliers that aren't advertised in the general search, and sometimes you find contacts of craftsmen who sell batteries into old cases, bringing them back to life.

💡

Use a picture search in the AliExpress or Yandex.Pictures app. Take photos of your headphones and upload them - the algorithm will find visually similar cases, which will save time on manual brute force.

Instructions for checking the efficiency of a new case

Once you have found a potential seller and received the goods, you need to conduct a thorough check. Don't rush to throw away the package until you make sure that the case is fully functional. The verification process takes a few minutes, but will save you from problems in the future.

First, visually inspect the inside. The plastic should be smooth, without seams or burrs. The magnets should hold the headphones tight enough to allow them to be removed in one motion. Then plug the case into the charger. The indicator should catch fire (usually orange or red) and go out or change color to green when fully charged.

Next step is pairing. Put your headphones in the case, close the lid and wait a few seconds. Then open the lid. The indicator should flash to signal pairing mode. If that doesn't happen, try resetting the headphones by putting the touch zones on the headset. 10-15 seconds while they're in the case.

Reset procedure (Reset):)


1. Put both earphones in the case.




2. Leave the lid open.




3.Push and hold the touch zones on both headphones simultaneously for 10-15 seconds.




4. Wait until the indicators flash red several times.

If the case still does not see the headphones after reset or does not charge them, the problem may be incompatibility of firmware versions or defective contacts, in which case it is better to return the goods to the seller before the buyer's protection expires.

Alternative solutions and custom cases

If the original Xiaomi Basic 2 case never came up, there are alternatives to consider: The accessories market offers versatile silicone carbine cases, but they only protect against scratches, not replace the charger. However, there are third-party electronics manufacturers that produce compatible case copies.

The quality of these copies varies, some of them are so well-made that they're visually indistinguishable from the original, but they have a smaller battery capacity, which means you'll have to charge your headphones more often on the way, but the cost of these solutions can be two to three times lower than the original parts.

There are also electronic repair shops, where if your old case is intact but no longer holds charge, it's sometimes cheaper and safer to replace the battery than to find a new case, which requires soldering skills, but retains the original board and pairing.

Technical nuances: why charging does not work

Often, users are faced with a situation where the case they find seems to fit, but the headphones do not charge. One of the common causes is contamination of the contacts. During operation, sulfur, skin fat and oxides accumulate on the gold patches of the headphones and inside the case, which creates high resistance, and the current simply does not pass.

To clean, use a cotton swab dipped in isopropyl alcohol. Don't use water or aggressive chemistry. Gently wipe the contacts on the headphones and pins inside the case. After the alcohol is dry, try charging the device again. In 80% of cases, the cleaning is the solution.

Another reason is that the headphones were in a discharged case for several months, their batteries could go into sleep mode, in which case the indicator on the case may flash, signaling an error. Try leaving the headphones in the case on charge for 30-60 minutes, even if the indicator is acting strange. Sometimes the controller needs time to "swing" the cells.

• 🧹 Regularly wipe contacts with alcohol to prevent oxidation.
• 🔋 Do not keep your headphones completely discharged for a long time.
• 🌡️ Avoid overheating the case in the sun, it kills lithium-polymer batteries.

⚠️ Warning: If the case heats up heavily during charging or emits a foreign smell, immediately disconnect it from the mains.This is a sign of a short circuit or battery failure, which can lead to fire. Frequently asked questions (FAQ) Can we use a Redmi Buds Basic 1 case for the Basic 2 version? No, it's not possible. Despite the look and feel, the models have different headphone shapes and, critically, different charging contacts, and the headphones just won't stand in place or charge. In addition, Basic 2 uses Micro-USB, and some versions of Basic 1 - Type-C or other port location. How much does the original case for Xiaomi Basic 2 cost? Price depends on the region and the seller. AliExpress original or quality compatible cases cost from 800 to 1500 rubles. In local stores, the price can reach 2000 rubles and above. B/O options can be found for 300-500 When you connect the power cable, the indicator on the front panel should light up in red or orange. When the case is fully charged, the indicator will go out or turn green (depending on the revision). If the indicator doesn't light up, check the cable and power supply.Does the Xiaomi Basic case have wireless charging? 2? No, the Redmi Buds Basic model. 2 Charging is carried out exclusively through a wired Micro-USB port located on the lower or lateral face of the case. 💡Search for a case for Xiaomi Basic 2 Carefulness requires: the exact matching of the model is key (Basic) 2, not Basic S or Lite and check the status of contacts before purchase.