The switch to electric shaving, especially with modern Xiaomi gadgets, is often a revelation for men who value comfort and technology. Many users make the mistake of using the device in the same way as a regular machine, which leads to irritation and dissatisfaction with the result. The right technique is not just movement on the skin, but a set of actions that includes preparing the face, choosing the mode of operation of the engine and subsequent care of the grid.
Xiaomi Mijia Electric Shaver and its analogues are equipped with a rotary system that is radically different from the grid models of other brands. To get perfectly smooth skin without cuts, you need to understand the principle of floating heads and the speed of rotation of knives. In this article, we will analyze all the nuances, from the first inclusion to the replacement of blades, so that your experience of use was as positive as possible.
The Chinese giant's current devices often support IPX7, which opens up new possibilities for hygiene. However, despite water protection, there are subtleties that cannot be ignored. For example, water temperature or the use of certain gels can affect battery life and blade sharpness. Let's figure out how to turn a daily ritual into an effective procedure.
Skin preparation and choice of shaving regime
Before you put the device to your face, it is critical to prepare the skin. Dry shaving requires absolutely dry and clean skin, devoid of moisture and residual cosmetics. If you plan to use the gadget "dry", wash yourself with warm water and soap and thoroughly wipe your face with a towel, as moisture creates excess friction.
For wet shaving, which many prefer because of the softness of the stroke, you need to apply a quality gel or foam. Xiaomi devices perfectly slide on the foam surface, cutting hairs at any angle. It is important not to save on foam, as it acts as a lubricant that protects the epidermis from microtrauma when in contact with a rotating mesh.
- 🧔 For a hard bristles, pre-spar your face with a hot towel on 2-3 minute.
- 💧 When shaving wet, use warm water to soften the hair shaft.
- 🚿 Make sure the device is at least 20% charge before the procedure.
⚠️ Warning: Never start shaving if there are open sores, severe inflammation or sunburns on the skin.Mechanical exposure to the rotary system can make things worse and cause infection.
The choice between dry and wet depends on your skin type and the time you have available.The dry method is quicker but can be more aggressive for sensitive skin.The wet method takes longer but provides smoother slip and less risk of irritation, especially if you grow tough hairs.
Proper shaving technique: Movements and pressure
The most common mistake of beginners is to put excessive pressure on the device. Xiaomi's razor design involves light skin contact, in which the floating heads themselves repeat the contours of the face. A strong press causes the skin to enter the mesh, causing discomfort and reducing the effectiveness of the cut.
And the movements have to be smooth and circular, especially when you're working with the rotary system, and unlike mesh razors, which need up and down translation, it's more effective to describe small circles against hair growth, and this allows you to capture hairs growing in different directions.
Particular attention should be paid to hard-to-reach places, such as the area under the nose and the jawline, for these areas, it is better to use a built-in trimmer or a special lock button for one of the heads (if the model supports this function) to point to treat complex areas.
- 🔄 Move the razor in circular motions without staying in one place for a long time.
- 👆 Keep the device at a 90 degree angle to the skin surface for maximum contact.
- 👃 Stretching the skin with your free hand in areas with difficult terrain for better sliding.
You don't want to shave everything from the first pass, you'd better walk in the face twice in different directions than once with a lot of pressure, and this technique will allow you to achieve perfect smoothness without the risk of damaging the top layer of the epidermis.
Using a trimmer to design contours
Most Xiaomi models, including the popular Mijia series, feature a retractable trimmer on the back, designed exclusively to shape the contours of the beard, mustache and temple trim, but not for the main shave.
To activate the trimmer, you usually need to press and hold the on button for 2 seconds or use a special slider, depending on the modification.The retractable knife has a fixed cut length, which allows you to create clear lines without the risk of cutting.
Trimmer activation: Double pressing the Power button or slider shift downWhen working with a trimmer, the movements should be short and jerky. Don't drive them over a large area, because its task is spot correction. Regular use of the trimmer helps to maintain a neat appearance even on days when full shaving is not required.
💡
For the ideal line, the beard will first go through the contour with a trimmer, and then gently finish the result with the main razor using the extreme blades of the head.
Cleaning and hygiene after each use
Hygiene is the key to long-term service of your device and skin health, and the residue of hair and skin oil, stuck between the blades, becomes the perfect environment for bacteria to reproduce, so cleaning should be a mandatory part of the ritual.
If your model is IPX7-marked, you can wash it under a stream of running water. Open the protective cover, turn on the device and place the work heads under warm (not hot!) water for a few seconds, which will remove most of the contaminants.
| Type of pollution | Cleaning method | Frequency |
|---|---|---|
| Hair residues | Water washing + brush | After every time. |
| Skin fat | Washing with liquid soap | Once a week. |
| Smell/disinfection | Special spray | Once a month |
After water treatments, be sure to remove the protective net and blow through the insides or gently walk through the attached brush. moisture inside the body can lead to oxidation of the contacts and reduce motor power over time.
⚠️ Warning: It is strictly forbidden to use hot water for washing (over 40).°C) as this may deform plastic elements and damage the lubrication of the motor bearings.
Lubrication and maintenance of blades
Even the best quality blades made of stainless steel or titanium coating require maintenance. Over time, friction of the metal against the metal (or skin) leads to heating and blunting. Lubrication helps reduce friction coefficient and extend the life of the cutting unit.
Use only special oils for electric shavers or, in extreme cases, mineral oil. Vegetable oils (olive, sunflower) can not be used - they dry out, form a sticky film and clog the mechanism, which will lead to breakage.