How to connect Xiaomi Redmi 6 to your computer USB: all ways and solutions to problems

Xiaomi Redmi 6 is a popular budget smartphone that is still widely used due to its reliability and functionality. However, many users face a problem: when connecting the device to a computer through a computer. USB-The cable doesn't happen -- the phone doesn't detect, charge, or display as a drive. In this article, we'll look at all the ways you can connect, configure, and troubleshoot.

The problem is often not the smartphone itself, but the wrong settings, the absence of drivers or a faulty cable, and we will look not only at standard connection for file transfer, but also at alternative methods – for example, through the use of a mobile phone. ADB You will also learn how to check the health of the ports and what to do if the computer “can’t see” Redmi 6 even after all the manipulations.

This article will be useful for both beginners and experienced users who want to optimize the process of data exchange between the phone and the PC (10/11) and MIUI (including old builds for Redmi 6).

1.Preparation for connection: what to check before starting

Before you connect the Xiaomi Redmi 6 to your computer, make sure that the basic conditions are met. Often the problem is solved at this stage without additional settings.

The first thing you should do is check. USB-Even if it looks whole, the internal wires may have been rubbed or oxidized. Try another cable (preferably original or certified). USB Also note the port on your computer: if you connect to the front panel of the system unit, try the rear port (it is connected directly to the motherboard and less likely to fail).

The second is charging the phone. If the charge level is lower. 10-15%, Some functions (such as file transfer) may be limited to the system. 6 charger 5-10 minutes before attempting to connect to a PC.

The third is unlocking the screen, and many users forget that to connect to a computer, the phone must be unlocked, and if the screen is locked with a password or a pattern lock, the system can ignore it. USB-Connection for security reasons.

• 🔌 Cable: Use original or high quality cable USB-Data-enabled cable (not all charging cables are suitable).
• 💻 PC port: Try different ones USB-ports (especially) USB 2.0 if you have a problem with USB 3.0).
• 🔋 Charge: Make sure the battery level is above 15%.
• 🔓 Screen: Unlock your phone before connecting.

⚠️ Attention: If you are using USB-Hub or extension, try connecting directly to the computer port. Hubs often don't provide enough power to maintain a stable connection.

2. Selection of regime USB-Connection to Xiaomi Redmi 6

By default, Redmi 6 can charge when connected to a PC, but not transfer files. To display the phone as a drive, you need to manually select the data mode.

After connecting the cable to your computer, unlock the Redmi 6 screen and swipe down from top to bottom to open the notification bar. The notification list will see a Charge message via USB — Click on it. A window will open with the choice of connection mode:

• 📱 File transfer (MTP): standard mode for data exchange (photos, music, documents).
• 🖥️ Transmission of photo (PTP): It is used to import photos into programs like Lightroom.
• 🔌 Charging only: The phone will charge but won’t show up as a device.
• 🔧 Mid-mode (for developers): rarely used, requires developer mode enabled.

Select "File Transfer (MTP)». After that, a new disk in the conductor (This computer or My computer) should appear on the computer. If this does not happen, proceed to the next section.

On Redmi 6s. MIUI 9 and below option of selecting the mode USB It may not be in the notification panel. In this case, go to Settings → Additional settings → Developer parameters → Configuration USB and choose MTP manually.

3. Install drivers for Xiaomi Redmi 6 on Windows

If the computer does not recognize Redmi 6 even after the choice of MTP, Most likely, there are no necessary drivers. 10/11 Usually install them automatically, but sometimes manual installation is required.

First, check if the phone is detected in Device Manager:

1. Press Win + X and select Device Manager.
2. Deploy Portable Devices or Other Devices.
3. If you see Redmi 6 with a yellow exclamation point, no drivers are installed.

For manual installation, download official Xiaomi drivers from the manufacturer’s website or use the universal Mi package. PC Suite (link to the official website: pcsuite.mi.com). ADB (Android Debug Bridge, which is suitable for most Android devices:

If the automatic methods do not work, download Minimal. ADB and Fastboot from forum.xda-developers.com and install it. After you restart your computer, connect Redmi 6 again, the device needs to be determined.

⚠️ Note: If after installing drivers in Device Manager appears Android device ADB Interface, but the phone still does not appear as a drive, try to turn off and turn on the mode again MTP smartphone.

💡

If the drivers don't install, try connecting Redmi 6 to another computer.If the problem recurs, it may be faulty. USB-port.

4. Solving Connection Problems: Frequent Errors and Fixing Them

Even after setting up the Xiaomi Redmi 6 correctly, you may not be able to connect to your computer.

4.1. the computer does not see the phone (no connection sound)

If the cable does not have a characteristic connection sound USB-device:

• 🔄 Check the other one. USB-port USB 2.0).
• 🔌 Try another cable (preferably original).
• 💻 Restart your computer and phone.
• 🛠️ Disable the antivirus (sometimes it blocks new devices).

4.2.The phone charges but does not transfer files

If Redmi 6 is charging but not showing up as a drive:

• 📱 Switch the mode. USB on MTP (see section 2).
• 🔧 Enable Developer Mode and Check Configuration Settings USB.
• 🖥️ Update the drivers in Device Manager.
• 🔄 Restart your phone in Safe Mode (hold the power button) → Safe regime).

Mistake 4.3 «USB-device not identified»

If Windows receives a notification USB-device not identified:

1. Turn the phone off the PC.
2. Go to Device Manager. → Find an unknown device. → right-button → Remove the device.
3. Connect Redmi 6 again and wait for the driver to install automatically.

If the problem persists, download NirSoft’s USBDeview utility, delete all Xiaomi-related entries, and reconnect the phone.

5. Alternative ways to connect Redmi 6 to a PC

If it's standard USB-Connection is not working, alternative methods of data transmission can be used.

5.1 Connection via Wi-Fi (FTP-server)

For this method, you will need an application FTP-server (e.g., Solid Explorer or FX File Explorer):

1. Install the app from Google Play.
2. Launch it. FTP-server in application settings.
3. Connect your computer and phone to a single Wi-Fi network.
4. Enter the address. FTP-servers (e.g., servers, ftp://192.168.1.100:2221) Windows Explorer.

The disadvantage of the method is the dependence on the speed of Wi-Fi and the need to install third-party software.

5.2 Use of cloud services

If you need to transfer a small amount of data, it is convenient to use cloud storage:

• 🌥️ Google Drive: Download files from your phone, then download them to your PC.
• 📁 Mi Cloud: Xiaomi’s built-in cloud (requires a Mi Account).
• ☁️ Yandex Disc./Mail.ru Cloud: Supports Automatic Photo Uploading.

5.3. Connection mode Fastboot/ADB

If the phone does not turn on or you need firmware, you can connect in Fastboot mode:

1. Turn off Redmi 6.
2. Press Volume Down + Power before the Fastboot logo appears.
3. Connect the phone to the PC.
4. Open the command line and enter:

fastboot devices

If the device is determined, you can flash it through Fastboot or restore data.

⚠️ Attention: Fastboot mode is designed for power users. Wrong commands can lead to a phone blink (breakdown.

💡

If it's standard USB-The connection does not work, first try alternative methods (Wi-Fi, cloud), and only then resort to Fastboot mode or repair.

6.Tune in. MIUI stable USB-connection

Sometimes connection problems are related to firmware settings MIUI. Let’s look at the key parameters that are worth checking.

Initiation of the developer mode

Some options (for example, debugging by USB) It's only available in developer mode:

1. Go to Settings. → The phone.
2. Press 7 times on the version MIUI Before the notification, you became a developer!.
3. Return to Settings → Additional settings → For developers.
4. Activate Debugging on USB.

6.2 Resetting settings USB

If the connection was previously working, but Suddenly stopped:

1. Go to Settings → Additional settings → For developers.
2. Find the option to withdraw debugging permissions by USB And press it.
3. Connect the phone to the PC again and confirm the debugging permission.

Update 6.3 MIUI

Old versions. MIUI (especially on the Redmi 6 s MIUI 9-10) There may be bugs with USB-Check for updates:

1. Go to Settings → About the phone → System update.
2. If an update is available, install it.

On Redmi 6s. MIUI 11 and newer option Configuration USB It may not be in the developer settings, in which case use the notification panel to select the mode. MTP.

7. Hardware check: port, cable, computer

If the software methods didn't work, the problem could be in the hardware, so let's look at how to diagnose a malfunction.

Diagnostics USB-port on Redmi 6

Signs of a faulty port:

• 🔌 The phone is not charged from different cables.
• 📱 When connected, the cable “falls out” or staggers.
• 🔥 The smell of burning or the port is heated.

To verify:

1. Connect Redmi 6 to another device (e.g., power bank).
2. Try cleaning the port with a wooden toothpick (not a metal object!).
3. If the port is damaged, contact the service center.

Verification USB-port

To rule out the problem on the PC side:

• 💻 Connect to the port another device (flash drive, mouse).
• 🔧 Check the Device Manager for errors in the Controllers section USB.
• 🔄 Restart the computer with the computer disconnected USB-device.

Testing of the cable

Even a good cable may be faulty.

• 🔌 Connect the cable to another phone.
• 📱 Check if the cable supports data transmission (some charging-only cables).
• 🔍 Check the stains for damage.

If you're using a non-original cable, try replacing it with a certified cable. Cheap cables often have thin wires that can't handle the load of data.

8. Frequent Questions and Answers (FAQ)