Transferring data from Android to Xiaomi via ShareMe: Full Guide 2026

Why Use ShareMe to Transfer Data

Switching to a new smartphone Xiaomi, Redmi or POCO Instead of using cloud services or cables, Xiaomi offers its own solution, the ShareMe app (formerly known as Mi Drop). This tool allows you to transfer files, contacts, photos and even applications without the Internet using direct communication over Wi-Fi.

ShareMe’s main advantage over alternatives (e.g. Google Drive or Samsung Smart Switch) is that there are no limits on the amount of data transferred and high speeds of up to 20 MB/s on modern models. However, many users face problems when using the first device: devices do not find each other, transfer is interrupted or some files are not copied. In this article, we will discuss all the nuances of working with ShareMe, including device preparation, solving typical errors and alternative methods of transfer.

It is important to note that the functionality of ShareMe depends on the version. MIUI. For example, in MIUI 14 and later, the application interface has been simplified and some functions (e.g., transmission) SMS) They're only available on flagship models, if your device is running on the same device. MIUI 12 or older, some of the instructions may be different – we’ll mention that too.

Preparation of devices for data transmission

Before you start transferring data, you have to do a few things on both smartphones, and neglecting to prepare is the main cause of transmission failures, starting with compatibility checks:

• 📱 Operating system: the old device must have Android 5.0 or newer installed.For Xiaomi — MIUI 9 and higher (Redmi Note 5 models may require an upgrade).
• 🔋 Battery charge: at least 30% on both devices, and at a charge level below 15%, ShareMe automatically shuts down the transmission to avoid discharge.
• 📶 Network settings: Disable mobile data and connect both phones to the same Wi-Fi network (even if you plan to use direct transmission) This will speed up the process of device discovery.
• 🔒 Permissions: Give ShareMe access to Warehouse, Contacts, and Locations (required to create a direct connection).

Pay special attention to the power saving settings. Xiaomi devices have the default battery optimization mode activated, which can interrupt background data transfer.

1. Go to Settings → Applications → Application Management → ShareMe.
2. Select Permissions → Autostart and enable the option.
3. Go back and tap the Energy Consumption, then select No Limits.

If you are transferring data from a non-Xiaomi device (such as Samsung or Huawei), install ShareMe from Google Play. the official app from Xiaomi is called com.xiaomi.midrop - avoid clones with similar names, as they may contain ads or malicious code.

Step-by-step: transfer data via ShareMe

When both devices are ready, you can start transferring. Let's look at the process of transferring data from the Samsung Galaxy. A52 Xiaomi 13 Pro (instructions are also relevant for other combinations).

Step 1: Start ShareMe on both devices

On Xiaomi (new device):

1. Open the ShareMe app (an icon with two phones and an arrow).
2. Tap Get (or Receive in English version).
3. Select the type of data to receive: Files, Contacts, Applications or Everything.

On the old device (Android):

1. Start ShareMe and select Send.
2. Allow access to the files if a request arises.
3. Select files to transfer (you can choose several types at the same time).

Step 2: Connecting devices

After selecting files on the old phone, a list of available devices will appear.Tap on your Xiaomi name (e.g. Redmi Note 12 Pro).+ 5G). If the device is not displayed:

• 🔄 Restart ShareMe on both phones.
• 📡 Make sure that the distance between the devices does not exceed 5 meters.
• 🔌 Switch from Access Point to Direct Connection (option in ShareMe settings).

Once the connection is established, the new device will be asked to confirm the transmission. Click Accept and wait until the process is complete.

💡

If the transfer is 99 percent dead, don't interrupt the process -- wait at least 10 minutes for the transfer to be completed, often due to file integrity checks.

Step 3: Verification of the transmitted data

After the transfer is completed:

1. On the new device, open the File Manager → Internal memory. → Received Files (or MiShare).
2. Check the integrity of files: run a few photos, videos and apps.
3. Contact and SMS automatically imported into the relevant applications (Contacts and Messages).

If some data is missing, retransmit only for missing files. Some types of data (such as Notes or App Settings) may not be portable, but will have to be synced separately through your Mi Account.

Typical errors and their solutions

Even with proper training, users face problems using ShareMe, and let’s look at the most common errors and how to fix them.

Mistake 1: Devices can't find each other

If Xiaomi is not listed in the list of available devices:

• 🔄 Reboot both phones – it resets network settings.
• 📡 Turn on the plane mode for 30 seconds, then turn it off. That resets the Wi-Fi cache.
• 🛠️ Update ShareMe to the latest version via Google Play or App Store (for iOS).
• 🔧 Reset network settings on your old device: Settings → System system → Reset → Resetting Wi-Fi, Mobile Network and Bluetooth.

Error 2: Transmission is cut off in the middle

If the process is interrupted by a Connection lost error:

• 🔋 Check your battery power – if it drops below 15%, plug the device into charging.
• 📶 Switch from Access Point to Direct Connection in ShareMe Settings.
• 🚫 Close all background apps, especially instant messengers and streaming services.
• 🔄 Try to transfer data in portions (for example, photos first, then videos).

Error 3: Contacts are not transmitted or SMS

If the contact or communication is not transferred:

• 📇 Make sure that your contacts are saved in your Phone Book on your old device, not in your Google account or in your phone. SIM-map.
• 🔄 In ShareMe settings on your old phone, turn on the option to Transfer Contacts and Transfer SMS.

⚠️ Attention: On devices with MIUI 14 and newer gear SMS ShareMe only works between Xiaomi smartphones. To transfer from Samsung or other brands, use Google Messages or SMS Backup & Restore.

Alternative ways to transfer data to Xiaomi

If ShareMe is not up to the task (for example, when transferring more than 50 GB or on outdated devices), consider alternative methods.

1. Transfer via cable USB (OTG)

The most reliable way to do a lot of data is to:

• 🔌 USB-cable OTG (Type-C to Type-C adapter for new models).
• 📱 File Manager (e.g. Mi File Manager or Solid Explorer).

Connect the old device to the new one through OTG, Then in the file manager select USB-The transfer speed reaches 40 MB / s (2-3 times faster than Wi-Fi).

2. Cloud services (Google Drive, Mi Cloud)

Suitable for transferring contacts, photos and documents.

1. On your old phone, upload data to Google Drive or Mi Cloud.
2. On Xiaomi, log in to the same account and download files.

Limitations:

• 📉 Google Drive’s free rate – 15 GB.
• ⏳ Speed depends on the Internet connection.
• 🔒 Some data (e.g., some data, SMS) non-synchronize.

3. Third-party applications

If ShareMe is not suitable, try:

• 📲 Send Anywhere – transfer without limits on volume, supports encryption.
• 🔗 Xender – an alternative with similar functionality, but with advertising.
• 📎 CLONEit – specializes in transferring applications and their data.

⚠️ Note: When using third-party apps, disable Battery Optimization for them in the settings MIUI, Otherwise, the transmission may be interrupted.

💡

For maximum transmission speed, use a combination of methods: contacts and SMS sync through Google account, and transfer files (photos, videos) through ShareMe or OTG-cable.

Transfer of applications and their data

One of the most difficult aspects when switching to a new smartphone is the transfer of installed applications and their data (for example, saves in games or settings of messengers). APK-Application files, not their data. Here's how to solve this problem:

1. Transfer APK via ShareMe

To transmit applications:

1. On the old device in ShareMe, select Apps.
2. Check the desired applications (you can choose several).
3. On the new Xiaomi, confirm acceptance and wait for the installation.

Limitations:

• 🚫 Not all applications can be transferred (e.g. system or c) DRM-protection).
• 🔄 After installation, you will need to update via Google Play.

2. Application data portability

To save progress in games or settings:

• 🎮 Games: Use built-in sync via Google Play Games or Facebook.
• 💬 Messengers: WhatsApp, Telegram and Viber have a backup function to the cloud.
• 📱 System settings: sync through your Mi Account (available on the MIUI 12 and newer).

For applications without cloud sync (such as some banking applications), use backup via ADB:

adb backup -apk -obb -shared -all -f backup.ab

This team creates a full backup that can then be restored to a new device. ADB Read our article ["Android Backup Through Android"] ADB: guide"](#).

Security of data transmission

Transferring data between devices is a process that requires attention to security, especially if you use public Wi-Fi networks or third-party applications, and the following steps will help prevent personal information from leaking:

• 🔐 Use a direct transmission (direct connection mode in ShareMe) rather than an access point. This eliminates the interception of data via the router.
• 🛡️ Turn off automatic connection to public networks in Wi-Fi settings.
• 📱 Check the permissions of data applications. For example, ShareMe does not have to request access to the data. SMS or call log if you only transfer files.
• 🗑️ Delete temporary files after transfer: in Settings → Warehouse → Clean up select Cash ShareMe.

If you are transferring data through the cloud services (Google Drive, Mi Cloud), you must:

1. Enable two-factor authentication for your account.
2. Once the transfer is complete, delete files from the cloud or restrict access to them.
3. Use encrypted archives for sensitive data (e.g., via 7-Zip WinRAR).

⚠️ Note: When you transmit via ShareMe in Access Point mode, other devices on the same network can theoretically intercept traffic. Always use Direct Connection if you transmit sensitive information.

FAQ: Frequent questions about ShareMe