How to Transfer Data from Android to Xiaomi Redmi Note 10: A Complete Guide with Proven Ways

Why data portability to Redmi Note 10 requires a special approach

Changing your smartphone is always an exciting process, especially when it comes to switching to a device with a different interface. Xiaomi Redmi Note 10, despite belonging to the Android family, has a number of features that can complicate standard data transfer. MIUI, The second is hardware differences: Qualcomm Snapdragon 678 processor and specific memory work can affect the speed of transferring large volumes of files.

Many users face the problem when the usual methods like Google Account or Bluetooth work incorrectly: contacts are duplicated, photos lose quality, and applications refuse to install. This article will help you avoid common mistakes and choose the best way to migrate depending on the amount of data and the technical capabilities of your devices. MIUI 14 – The results are shown in the comparative table below.

Preparation of devices for transfer: 5 mandatory steps

Before you start transferring, you need to perform basic steps on both smartphones. Neglecting preparation can lead to data loss or transmission failures. Pay special attention to the free space on the Redmi Note 10 - if the internal memory is less than 15%, the system can automatically interrupt the copying of files.

• 📱 Update both devices to the latest version (check Settings on Redmi Note 10) → The phone. → Updating the system)
• 🔋 Charge batteries to at least 50% – with a low charge MIUI block out background processes
• 🗑️ Clear the cache in the Gallery, Contacts and Files apps (via Settings) → Annexes → Application management)
• 📡 Turn it off. VPN Energy saving modes – they interfere with stable data transmission
• 🔐 Back up important files on a cloud service or PC (instructions in the next section)

⚠️ Note: If the old phone has data encryption enabled (Settings) → Security → Encryption), some transfer methods (e.g., through OTG-In this case, use cloud services or a computer as an intermediary.

Charging both phones >50%|Updated MIUI Android|Cleared cache of system applications|Disabled. VPN/energy-saving|Created a backup of important files-->

Method 1: Mi Mover migration – official solution from Xiaomi

Mi Mover is built into the MIUI An application specifically designed to transfer data between Xiaomi devices, it supports the transfer of contacts, messages, photos, videos, audio files, applications (including their data), and even some system settings. The main advantage is to preserve the structure of folders and metadata files, which is especially important for photos with geotags.

However, there are limitations: Mi Mover only works between Xiaomi devices (or Redmi/Poco) It requires that both smartphones be installed. MIUI 9 Also the maximum amount of data transmitted per session — 4 GB: For large volumes, you have to break the transfer into several stages.

Step-by-step:

1. On Redmi Note 10, open the Mi Mover app (if not available, download from Google Play).
2. Select “I am a new user” and follow the wizard’s prompts.
3. On your old phone, run Mi Mover and select "I'm an old user"
4. Scan it. QR-code from the screen of a new phone or connect via a direct Wi-Fi connection
5. Select data types to transfer and confirm the start of the process
6. Wait until the end (time depends on the amount of data — ~1 GB is passed on 5-7 minute)

⚠️ Warning: If Mi Mover fails to connect during the transfer, check if the firewall is blocking the old device. On some Samsung and Huawei models, you need to manually allow Mi Mover to access the local network in the security settings.

Cloud services (Google Drive, Mi Cloud)|Direct transmission Wi-Fi/Bluetooth|Through the computer (USB-cable)|Specialized applications (Mi Mover, Smart Switch)|Another way.-->

3. Method 2: Transferring through Google Account – universal, but with nuances

Syncing through Google Account is the most versatile way that works on any Android device, allowing you to migrate contacts, calendars, some system settings, and even some of the app data (if they support backup in Google Drive).

• 📁 Photos and videos are synced only in compressed format (originals take place in Google Photos)
• 📱 Applications are ported without their data (for example, game progress will be lost)
• 🔄 Messages and calls are not automatically synced (more applications are needed)
• 📶 Requires a stable Internet – with a weak connection, the process can take hours

How to synchronize data correctly:

On an old phone:

1. Go to Settings → Accounts → Google
2. Select your account and activate sync for: - Contacts - Calendar - Google Photos (enable "Backup and Sync") - Google Drive (for documents)
3. Wait for the synchronization to be completed (check in Settings). → Accounts. → Google → Account management → Synchronization)

On Redmi Note 10:

1. When you first turn on, select “Copy Data” and log in to the same Google Account.
2. If the phone is already configured, go to Settings → Accounts. → Add an account → Google
3. Enable synchronization for the same data categories
4. To recover photos, open Google Photos and wait for the media files to download.

Importantly, if the old phone had “Storage Optimization” enabled in Google Photos, the original photos could have been removed from the device, in which case they would have to be downloaded again to the Redmi Note 10, which would take additional time and traffic.

💡

If you have a slow Internet connection, go to Settings before syncing Google Photos → Backup and select High Quality over Original, which saves up to 80% of traffic while maintaining acceptable photo quality.

Method 3: Direct Wi-Fi transmission via third-party applications

If Mi Mover is not suitable (for example, you are transferring data from a non-mode)-Xiaomi Devices), and Google Account seems too slow, you can use third-party applications for direct transmission over Wi-Fi:

• 📲 Xender – supports transfer of any files, applications, including APK) And even the history of the calls, up to 40MB/s.
• 🔗 Send Anywhere — generates 6-digit code to connect, no registration required. You can send files up to 10 GB.
• 📎 Files by Google – Sharing Nearly works without internet, but requires Bluetooth enabled.
• 🚀 LocalSend is open source, encryption-enabled, perfect for sensitive data.

Step-by-step instructions for Xender (recommended option):

1. Install Xender on both phones from Google Play or via Google Play APK
2. On Redmi Note 10, select “Get” and on your old phone, “Send”
3. Connect to the access point created by Xender (password will appear on the screen)
4. Select files to transfer (you can mark entire categories: "Apps", "Music", etc.)
5. Start transfer and wait until completion (don’t close the application!)

The advantage of Xender over Mi Mover is support for any Android devices and the ability to transfer APK-data files (e.g. game saving) but when transferring large volumes (>5 GB) may cause breaks in connection:

⚠️ Note: If Xender interrupts transmission to 70-80%, Try: Disable Adaptive Brightness in screen settings (it interferes with Wi-Fi stability) Manually limit the transmission speed in Xender settings to 10 Use flight mode on both phones, leaving only Wi-Fi enabled

5. Method 4: Computer Transfer – for Large Data Volumes

If you need to transfer tens of gigabytes of data (for example, a collection of movies or a collection of films). RAW-And the most reliable way to do this is to use a computer as an intermediary, and this is also an indispensable method if you want to use a computer:

• 🔌 One phone does not have Wi-Fi or Bluetooth.
• 📂 Keep the folder structure unchanged
• 🔒 Data is confidential and clouds cannot be used
• 🎮 You need to transfer game files from OBB-Data (e.g. Genshin Impact, PUBG)

Tools required:

• 🖥️ Computer with Windows/macOS/Linux
• 🔌 Two. USB-cables (preferably original)
• 📁 Copying software (e.g. TeraCopy for Windows or rsync for Windows) macOS/Linux)

Step-by-step:

1. Connect your old phone to your computer in "File Transfer" mode" (MTP)
2. Copy all the necessary data to your computer: Folders for copying (paths for standard Android): /storage/emulated/0/DCIM/ # Photos and videos /storage/emulated/0/Download/ # Downloads. /storage/emulated/0/WhatsApp/ # Backups of WhatsApp /storage/emulated/0/Android/obb/# Game data
3. Turn off your old phone and connect the Redmi Note 10
4. Move the data to the appropriate folders on the new device
5. For applications: install APK-files manually, and then copy folders Android/obb/ and Android/data/

Method 5: Use of OTG-cable

If you have OTG-cable (USB Type-C → USB-A) Or a memory card, you can transfer data without a computer or the Internet:

• 📸 Transfer of photos and videos in original quality
• 🎵 Music and podcasts
• 📄 Documents (PDF, Word, Excel)
• 📱 Backup copies of applications (APK + OBB)

Instructions for OTG-cable:

1. Connect the flash drive to the old phone via OTG-adapter
2. Copy the files to a flash drive (use a file manager, such as Mi File Manager)
3. Turn off the flash drive and connect it to the Redmi Note 10
4. Transfer files to internal memory or SD-map

Instructions for the memory card:

1. Insert a memory card into an old phone
2. Transfer data to the map (for example, to the folder) DCIM/Camera photo)
3. Remove the card and paste it into the Redmi Note 10
4. In the storage settings (Settings) → Storage) select "Transfer data to the device"

⚠️ Redmi Note 10 supports microSD cards up to 512 GB, but only in format FAT32 or exFAT. if your card is formatted in NTFS, It will have to be reformatted (data will be deleted!) and be aware that some apps (such as Netflix or other apps) will have to be re-formatted. Pokémon GO) Refusing to work with a memory card MIUI.

7. Problem Solving: What to Do If Data Is Not Portable

Even if you follow all the instructions, you can still get errors, and here are the typical problems and solutions for the Redmi Note 10:

If none of the methods worked, try resetting your settings to the Redmi Note 10 (but only after you have backed up!).Sometimes conflicts arise from residual data from previous port attempts.

1. Go to Settings → About the phone → Reset settings
2. Select "Reset all settings" (not "Delete all data")
3. After restarting, repeat the data transfer using the selected method.

💡

If you’re migrating data from your iPhone to your Redmi Note 10, use Apple’s official Move to iOS app in reverse: install it on Xiaomi first, then follow the instructions. This method supports the transfer of contacts, photos, videos, and even some notes.

FAQ: Answers to Frequent Questions